Dependence of the methylene selectivity on the composition of hydro-organic eluents for reversed-phase liquid chromatographic systems with alkyl bonded phases

Summary A theoretical treatment is presented which considers differences between the composition of the mobile phase and solvents that are incorporated into the bonded phase via preferential sorption. Equations are derived and used to analyze retention data for various homologs chromatographed under reversed-phase conditions using alkyl bonded phases and combinations of water-methanol, water-acetonitrile and watertetrahydrofuran as mobile phases. In the case of water-methanol the surface phase and bulk mobile phase compositions are similar. However, significant differences in composition between the two phases are observed when binary combinations of water-acetonitrile and water-tetrahydrofuran are used as the cluents.     

Solid-phase extraction-liquid chromatography-fluorimetry for organotin speciation in natural waters

Summary A method is reported for the determination of dibutyltin (DBT), diphenyltin (DPhT), tributyltin (TBT), and triphenyltin (TPhT) species at the nanogram per litre concentration level in natural water samples. Analytes were isolated from samples by solid-phase extraction and analysed both off-line and on-line by reversed-phase high-performance liquid chromatography with post-column derivatization and fluorimetric detection. Several SPE cartridges and eluents were evaluated; C₁₈ enrichment and elution with a mixture of methanol, acetic acid, and water was found most suitable. Preconcentration factors up to 250 can be achieved when a 500-mL sample is processed. Detection limits, recovery rates, and the precision of the whole process have been determined. The method has been applied to the determination of organotin species in spiked natural water samples collected on the NW Mediterranean coast. Recovery rates range from 75 to 110% and detection limits are at the low ng L⁻¹ level (1–3 ng Sn L⁻¹ for DPhT, DBT, and PhT and 40 ng Sn L⁻¹ for TBT when 250 mL spiked sea water is processed.)     

Hydrodynamic Radius Characterization of a Vinyl-Type Polynorbornene by Size-Exclusion Chromatography with a Static and Dynamic Laser Light Scattering Detector

Both absolute molecular weight and molecular sizes (radius of gyration and hydrodynamic radius) of a vinyl-type polynorbornene eluting from size-exclusion chromatography columns were determined by combined with a static and dynamic laser light scattering detector. The hydrodynamic radius of polymer fraction eluting from size-exclusion chromatography columns was obtained from dynamic laser light scattering measurements at only a single angle of 90° by introducing a correction factor. According to the scaling relationship between molecular sizes and molecular weight and the ratio between radius of gyration and hydrodynamic radius, the vinyl-type polynorbornene took a random coil conformation in 1,2,4-trichlorobenzene at 150 °C.     

The chromatographic properties of a mixed-bed stationary phase combining reversed-phase and strong anion exchange properties

Summary The feasibility of using columns prepared by mixing together ion exchange and reversed-phase packing materials, for the simultaneous separation of ionised and unionised molecules, has been examined using a range of test solutes. Columns prepared in this way showed chromatographic properties which were intermediate between those of the individual phases. The dual nature of the retention mechanism allowed the retention of ionisable molecules to be adjusted using pH whilst that of uncharged compounds was unaffected. The simultaneous chromatography of model compounds and their glucuronide, sulphate and glycine conjugates, under a variety of conditions, was demonstrated.     

Sequential optimisation of the separation of a complex mixture of plastics additives by HPLC with a quaternary gradient and a dual detection system

Summary The separation of two families of plastics additives (phenolic antioxidants and UV absorbers) has been achieved by high performance liquid chromatography with a quaternary gradient. A methodology of separation based on a sequential optimization is described. After a preliminary study of the effects of solvents on retention of compounds, the mobile phase is first chosen for each class of additives (Irganox and Tinuvin), then for the mixture of all the compounds and the separation is finally optimized. The importance of the column phase ratio is also reported. The use of two detectors, UV absorbance and light-scattering, enables all the compounds to be detected. The performance of the detectors has been compared and the effects of the nebulization temperature on the detection of low molecular mass compounds is reported.     

硝酸活化高灵敏度离子选择性电极法测定氟

先在0．5 mol·L-1硝酸介质中活化氟离子选择性电极,再在含硝酸的总离子强度调节混合液(TISAM)中测定氟,线性范围为1×10-7～1×10-2mol·L-1,检出限为1．9μg·L-1。该方法应用于绿茶饮料、水、牛奶中痕量氟的测定,结果的RSD小于4．8％,回收率在96．1％至100．2％之间,对氟离子选择性电极在硝酸介质中的活化机理作了阐述。     

Evaluation of a complete HPLC solvent optimization system involving piece-wise quadratic modelling

Summary Interpretive methods are accepted to give the best possible results for selectivity optimization in HPLC. However the methods are very complex, and most work so far has been detailed academic studies. This paper describes an evaluation of a complete integrated system incorporating peak labelling, modelling of retention behaviour and calculation of response surfaces, with particular emphasis on the retention modelling. The peak labelling section has been discussed previously.A piece-wise quadratic function is investigated for the modelling of retention times across an isoeluotropic plane to effect selectivity optimization in HPLC. This requires 10 data-points on the isoeluotropic plane. The predicted global optimum and local optima are evaluated by comparison of calculated and experimental retention data, for a nine component sample. Seven interstitial points, distributed across the whole plane between the data-points, are similarly evaluated for a related sample. The typical error (in retention time) is less than 2%, often 1%, and the maximum error is 4.2%. At the global optimum the error was found be less than 1.3% for all 9 peaks.     

Chromatographic Analysis of Trans Resveratrol in Italian Wines: Comparisons between FL, UV and MS Detection

Resveratrol (3,5,4′-trihydroxystilbene) is a phytoalexin that belongs to the group of stilbenes, known to occur in grapes and consequently in grape products. Its presence in wine is an important qualitative parameter because of the several beneficial effects on human health. The aim of this work is the development of a high-performance liquid chromatographic (HPLC) method for the determination of trans resveratrol in wines, and comparisons between the results obtained by different detection techniques: UV-vis spectroscopy, fluorescence spectroscopy and mass spectrometry. Resveratrol is analysed on a C-18 column using gradient elution. The method permits direct injection of sample, revealing to be time-saving, overcoming the need of sample pre-treatment steps. Detection limits were 154.8 ng mL⁻¹ by HPLC-UV, 118.0 ng mL⁻¹ by HPLC-FL and 48.0 ng mL⁻¹ by HPLC-MS. Trans resveratrol has been then quantified in a group of 52 wines derived from different Italian regions, cultivars and winemaking technologies by HPLC-UV.     

稀土离子在多孔阳离子交换剂内的扩散动力学

研究了稀土离子在Amberlyst15、D001、XN1010多孔树脂内的自扩散。结果表明,扩散过程遵循二级分散扩散机制。用粒内扩散方程求算了有效粒内扩散系数e,将e分解为树脂孔道扩散系数p及树脂固相扩散系数s,p与该离子在外部溶液中的自扩散系数相近,而s接近于与实验用的多孔树脂交联度相同的凝胶树脂内的自扩散系数值。     

The spatial distribution of poly(methyloctylsiloxane) deposited by solvent evaporation in the pores of HPLC silica particles

Summary Poly(methyloctylsiloxane) (PMOS), sorbed into the pores of HPLC silica particles by solvent evaporation, can function as a useful stationary phase for reversed-phase chromatography. The present work addresses the question of how the PMOS is distributed in the pores. Measurements of the surface area (BET, N₂) of a series of partially loaded samples (0–40% PMOS, m/m) using a typical batch of HPLC silica (10 μm irregular particles with 6 nm pores) show that the specific surface area of the samples decreases linearly with the specific loading (mass of PMOS per gram of silica). This result is not consistent with a “film” model in which the PMOS is deposited uniformly on the pore walls, but is consistent with a model in which long segmented “plugs” of PMOS are deposited within the pore system. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996