Fatigue damage behavior of a surface-mount electronic package under different cyclic applied loads

This paper studies and compares the effects of pull-pull and 3-point bending cyclic loadings on the mechanical fa- tigue damage behaviors of a solder joint in a surface-mount electronic package. The comparisons are based on experimental investigations using scanning electron microscopy （SEM） in-situ technology and nonlinear finite element modeling, respec- tively. The compared results indicate that there are different threshold levels of plastic strain for the initial damage of solder joints under two cyclic applied loads; meanwhile, fatigue crack initiation occurs at different locations, and the accumulation of equivalent plastic strain determines the trend and direction of fatigue crack propagation. In addition, simulation results of the fatigue damage process of solder joints considering a constitutive model of damage initiation criteria for ductile materials and damage evolution based on accumulating inelastic hysteresis energy are identical to the experimental results. The actual fatigue life of the solder joint is almost the same and demonstrates that the FE modeling used in this study can provide an accurate prediction of solder joint fatigue failure.     

Hopf Bifurcation Control of a Hyperchaotic Circuit System

This paper is concerned with the Hopf bifurcation control of a new hyperchaotic circuit system. The stability of the hyperchaotie circuit system depends on a selected control parameter is studied, and the critical value of the system parameter at which Hopf bifurcation occurs is investigated. Theoretical analysis give the stability of the Hopf bifurcation. In particular, washout filter aided feedback controllers are designed for delaying the bifurcation point and ensuring the stability of the bifurcated limit cycles. An important feature of the control laws is that they do not result in any change in the set of equilibria. Computer simulation results are presented to confirm the analytical predictions.     

大电流纳秒级脉宽激光二极管驱动电路的设计

脉冲激光雷达探测的性能直接与激光束的质量和能量有关,而激光驱动电路则直接决定了脉冲激光的功率和脉冲宽度。基于半导体激光雷达探测系统的要求,设计出应用于激光雷达发射系统的大电流纳秒级脉冲半导体激光二极管的驱动电路。介绍了电路的系统结构和驱动级电路的模型及其理论分析,推导其电流数学模型计算公式,并对关键器件的选择进行了总结;运用SPICE仿真程序对驱动电路进行了仿真。制作了印刷电路板,得到峰值电流25A,脉宽15ns的脉冲电流,满足设计要求。     

新型AGC电路在光纤水听器中的稳幅作用

在相位载波(Phase Generated Carrier,PGC)解调的基础上,分析了新型自动增益控制(Auto Gain Control,AGC)电路与PGC解调相结合的信号处理方式,并进行了MATLAB仿真.理论推导和MATLAB仿真的结果说明新型AGC电路在光纤水听器中能起到稳定输出信号幅度的作用.     

一个新四维自治超混沌系统及其电路实现

提出了一个新的四维超混沌系统,并对该系统的基本动力学特性进行了深入研究,得到该系统的LE,LE维数,给出了Poincare映射图、LE谱、分岔图以及时域图和相图.利用Mutisim软件设计了该新混沌系统的振荡电路并进行了仿真实验.经过数值仿真和电路系统仿真证实该系统与以往发现的混沌吸引子并不拓扑等价,属于新的混沌系统. 关键词： 超混沌系统 Lyapunov指数 Poincare截面图 电路实现     

用数字毫伏表测量RLC串联电路相频特性

在论述RLC串联谐振电路和并联谐振电路原理的基础上,提出用数字毫伏表测量RLC串联谐振电路相频特性曲线的方法,并将测量结果与传统示波器测量方法比较,分析误差产生的原因是由于电感器交流内阻的影响所致。     

Nanosatellites for quantum science and technology

Bringing quantum science and technology to the space frontier offers exciting prospects for both fundamental physics and applications such as long-range secure communication and space-borne quantum probes for inertial sensing with enhanced accuracy and sensitivity. But despite important terrestrial pathfinding precursors on common microgravity platforms and promising proposals to exploit the significant advantages of space quantum missions, large-scale quantum test beds in space are yet to be realised due to the high costs and lead times of traditional ‘Big Space’ satellite development. But the ‘small space’ revolution, spearheaded by the rise of nanosatellites such as CubeSats, is an opportunity to greatly accelerate the progress of quantum space missions by providing easy and affordable access to space and encouraging agile development. We review space quantum science and technology, CubeSats and their rapidly developing capabilities and how they can be used to advance quantum satellite systems.     

微带型光导开关的电压转换效率

采用微带测试电路对光导开关电压转换效率进行了测试。依据传输线理论,考虑微带传输电路的端点反射,计算给出了光导开关导通电阻不为0的情况下,微带测试电路电压转换效率的解析结果。计算表明:对窄脉宽的线性电脉冲输出,电压转换效率将小于50%;对lock-on模式下的宽脉冲输出,电压转换效率可以超过50%,在理想情况下达到100%;在临界状态下,形成双峰电脉冲输出。结果表明,存在端点反射且光导开关产生电脉冲脉宽达到一定值时,微带线可以起到倍压传输线的作用。     

超导电力技术新进展及其未来发展的思考

近年来高温超导材料研究取得很大进展,它在电力领域的应用研究已受到广泛关注,一些示范样机,诸如高温超导输电电缆、变压器、故障电流限制器、电机和储能装置已经研制成功并投入示范性试验.超导技术是21世纪具有战略经济意义的高新技术,文章将介绍高温超导电力应用研究的新进展及其未来发展的思考。     

高光谱成像技术的柑橘植株叶片含氮量预测模型

氮素是果树生长发育的一种大量必需元素,及时准确地监控果树的氮营养状况,对果树的合理施肥、增产、优化果实品质以及减缓过量施氮引起的水资源污染具有重要意义。利用高光谱成像技术结合多变量统计学方法,建立了柑橘植株叶片的含氮量预测模型。研究步骤为：高光谱扫描、提取平均光谱曲线、预处理原始光谱数据、采用连续投影法提取特征波段和建立含氮量预测模型。从SG平滑、SNV、MSC、1-Der等11种预处理方法中筛选出的较优预处理方法是SG平滑、Detrending和SG平滑-Detrending。对应这三种最优预处理方法,先采用连续投影法挑选出各自的特征波长,然后将各特征波段下的光谱反射率作为偏最小二乘、多元线性回归和反向传播人工神经网络模型的输入,各自建立三个预测模型。从以上获得的9个预测模型中,得出两个最优模型SG平滑-Detrending-SPA-BPNN(R_p：0.851 3,RMSEP：0.188 1)和Detrending-SPA-BPNN(R_p：0.8609,RMSEP：0.159 5)。结果表明,利用高光谱数据测定柑橘叶片含氮量具有可行性。这为实时、准确地监控柑橘植株生长过程中叶片含氮量的变化以及合理科学的氮肥施加提供了一定的理论基础。