pH-Responsive N^C-Cyclometalated Iridium(III) Complexes: Synthesis,Photophysical Properties,Computational Results,and Bioimaging Application

Herein we report four [Ir(N^C)₂(L^L)]ⁿ⁺, n = 0,1 complexes (1–4) containing cyclometallated N^C ligand (N^CH = 1-phenyl-2-(4-(pyridin-2-yl)phenyl)-1H-phenanthro[9,10-d]imidazole) and various bidentate L^L ligands (picolinic acid (1), 2,2′-bipyridine (2), [2,2′-bipyridine]-4,4′-dicarboxylic acid (3), and sodium 4,4′,4″,4‴-(1,2-phenylenebis(phosphanetriyl))tetrabenzenesulfonate (4). The N^CH ligand precursor and iridium complexes 1–4 were synthesized in good yield and characterized using chemical analysis, ESI mass spectrometry, and NMR spectroscopy. The solid-state structure of 2 was also determined by XRD analysis. The complexes display moderate to strong phosphorescence in the 550–670 nm range with the quantum yields up to 30% and lifetimes of the excited state up to 60 µs in deoxygenated solution. Emission properties of 1–4 and N^CH are strongly pH-dependent to give considerable variations in excitation and emission profiles accompanied by changes in emission efficiency and dynamics of the excited state. Density functional theory (DFT) and time-dependent density functional theory (TD DFT) calculations made it possible to assign the nature of emissive excited states in both deprotonated and protonated forms of these molecules. The complexes 3 and 4 internalize into living CHO-K1 cells, localize in cytoplasmic vesicles, primarily in lysosomes and acidified endosomes, and demonstrate relatively low toxicity, showing more than 80% cells viability up to the concentration of 10 µM after 24 h incubation. Phosphorescence lifetime imaging microscopy (PLIM) experiments in these cells display lifetime distribution, the conversion of which into pH values using calibration curves gives the magnitudes of this parameter compatible with the physiologically relevant interval of the cell compartments pH.     

Crystal structure of NaCu5S3

The hexagonal compound NaCu₅S₃ [a=6.978 (5),c=7.209 (6) Å, space group P 6₃22-D ₆ ⁶ ,Z=2] was synthesized under hydrothermal conditions. The crystal structure was solved by direct methods from 140 single crystal X-ray data. The refinement yielded anR value of 2.3%. The Na atom has an octahedral coordination of S atoms [Na-S=2.89 Å, 6 ×]. The atom Cu(1) is bound to two S atoms at 2.19 Å and the atom Cu(2) to three atoms at 2.36 Å. In addition the Cu(1) atom is coordinated to four Cu(2) atoms, and the Cu(2) atom to six Cu(1) atoms with Cu-Cu distances of 2.70 Å and 2.72 Å. The S atom has an irregular coordination figure built up by two Na and four Cu atom neighbours. The connection of the different coordination polyhedra results in a framework structure.de|Die hexagonale Verbindung NaCu₅S₃ [a=6.978 (5),c=7.209 (6) Å, Raumgruppe P 6₃22-D ₆ ⁶ ,Z=2] wurde unter Hydrothermalbedingungen synthetisiert. Die Kristallstruktur wurde mittels direkter Methoden anhand von 140 Einkristall-Röntgendaten gelöst; die Verfeinerung ergab einenR-Wert von 2.3%. Das Na-Atom hat eine oktaedrische Koordination von S-Atomen [Na-S=2.89 Å, 6 ×]. Das Atom Cu(1) ist an zwei S-Atome mit 2.19 Å und das Atom Cu(2) an drei S-Atome mit 2.36 Å gebunden. Weiters wird das Atom Cu(1) von vier Cu(2)-Atomen und das Atom Cu(2) von sechs Cu(1)-Atomen umgeben, wobei die Cu-Cu-Abstände 2.70 Å und 2.72 Å betragen. Das S-Atom hat ein unregelmäßiges Koordinationspolyeder, das aus zwei Na- und vier Cu-Atomen aufgebaut wird. Die Verknüpfung dieser unterschiedlichen Koordinationspolyeder ergibt eine Gerüststruktur.

---

Die Kristallstruktur von NaCu₅S₃

     

白钨酸研究——Ⅶ.K3W2Cl9的制备及反应

用粉状白钨酸作原针,在一般条件下制备K₃W₂Cl₉,产率达53%,证明白钨酸是比黄钨酸优越的钨化学试剂。研究了K₃W₂Cl₉经离子又换转化为酸的形态后与Ndz₂(C0₃)₃的反应。得到了新的化合物NdW₂Cl₉,提出了一条新的制备溶解度大的各种金属离子与W₂Cl₉^3-的化合物的途径。 对K₃W₂Cl₉和NdW₂Cl₉进行了紫外可见尤谱和X针线粉末衍射的测定。     

A Polarographic Study of ϵ-Caprolactam Complexes of Uranium and Tellurium

The polarographic behaviour of uranium and tellurium has been studied in the presence of increasing concentration of complex forming agent viz. ?-caprolactam at pH 4.4 for U(VI) and at pH 10.0 for Te(IV) at μ=0.1 M KNO₃. In both cases the waves have been found to be diffusion controlled and irreversible. The values of kinetic parameters (σπ_a and K°_f,h) have been calculated as a function of the ligand concentration. Method is suitable for the quantitative determination of these metals individually and simultaneously with the effect of diverse ions.     

Gravimetric and Colorimetric Determinations of Copper,Cobalt, Zinc and Mercury with 1-(2-Methylindole-3-Acetyl)-4-Arylthiosemicarbazide

1-(2-Methylindole-3-acetyl)4-arylthiosemicarbazides have been prepared and were used as reagents for gravimetric and colorimetric determinations of copper, cobalt, zinc and mercury. The synthesis of the same metal complexes of these thiosemicarbazides as a potential biological derivatives was also described.     

The Synthesis of Alanine Oligopeptides

The oligopeptides of alanine (penta-, deca-, and pentadeca-) were synthesized by solid phase method and new peptide-resin cleaving reagent TFA-BBr₃ was used to cleave the peptides from resin-support. Penta-alanine was also synthesized by liquid phase for the comparision and FAB-Mass method was used to determine the molecular weight of penta-alanine. HPLC separation of these new oligopeptides were described.     

光催化甲苯衍生物、环烷烃与无机亚磺酸盐的位点选择性C(sp3)-H砜基化

烃类是最基础的有机分子之一,具有品种丰富、来源广泛、价格低廉等优势,其多样性、选择性转化一直备受合成化学家关注.然而,这些化合物中通常存在多个键能高、极性低、相互间差异性小的C(sp3)-H键,因此,实现高效、选择性C-H官能化极具挑战性.近年来,可见光催化广泛应用于有机合成中,与氢转移催化相结合所发展的可见光氢转移光...     

多孔碳材料的化学气相后处理及其超级电容性能

以廉价的椰壳为原料制备了高比表面积的多孔碳材料,然后在密闭的反应釜中以硝酸蒸汽对多孔碳材料进行了后处理,制备了亲水性更好的多孔碳材料。采用扫描透射电子显微镜(TEM)、物理吸附、X射线粉末衍射(XRD)、拉曼光谱(Raman)和接触角测试对材料的微观形貌、孔道结构、组成和亲水性进行了表征,探究了不同温度下硝酸蒸汽对多孔碳材料的形貌、结构的影响,并采用循环伏安法、恒电流充放电法和交流阻抗法考察了多孔碳材料的超级电容性能。结果表明,经过硝酸蒸汽处理后的多孔碳材料的比表面积和孔体积均有所降低,且随着处理温度的升高,降低得更加明显,而亲水性却越来越好。电化学测试结果表明,经过100℃硝酸蒸汽处理的多孔碳材料(CSC-100)具有最佳的超级电容性能。在以6 mol·L^-1 KOH为电解液的三电极体系中,当电流密度为0.5 A·g^-1时CSC-100的比电容可达452.9 F·g^-1,而未经硝酸蒸汽处理的多孔碳材料(CSC)的比电容仅为350.4 F·g^-1。电容贡献分析表明CSC-100良好的亲水性和表面官能团不仅提高了双电层电容,也提高了赝电容。     

氧化铜表面臭氧分解路径及表面氧物种生成机理研究

基于密度泛函理论（DFT）计算研究了O3在完整和具有氧空位的CuO(111)表面吸附的吸附位、吸附结构、吸附能和电子转移情况,比较了O3在完整表面和具有氧空位的表面分解的路径和能垒,分析了氧空位和表面吸附氧的生成机理。结果表明,在完整CuO表面,O3分子通过化学吸附或物理吸附表面结合,吸附能最高为-1.22eV（构型bri(2)）。O3在具有氧空位的CuO表面均为化学吸附,吸附能最高为-2.95eV（构型ovbri(3)）,显著高于完整表面的吸附能。O3吸附后,Cu吸附位的电荷密度减小,O3中的O原子附近的电荷密度显著增强,电荷从CuO表面转移到O3,并形成Cu-O离子键。O3分解后形成了超氧物种,提高了表面的氧化活性。在完整表面,以构型bri(2)为起始构型的路径反应能垒最低,为0.52eV;O2*在完整表面的脱附所需要的最低能量为0.42eV,形成氧空位的O2*脱附能为2.06eV。在具有氧空位的表面,O3分解的反应能垒为0.30eV（构型ovbri(1)）和0.12eV（构型ovbri(3)）,均低于完整表面的反应能垒;分解形成的O2*的最低脱附能也低于完整表面,为0.27eV。可见,氧空位的形成提高了吸附能,降低了反应能垒,使O3分子更容易吸附在CuO表面,并加快了O3的催化分解。     

Mn-Ce-M复合改性无硅残渣炭催化剂的NH3选择性还原NO性能研究

生物质作为极具潜力的可再生能源,其热解制油技术备受关注,副产物残渣炭的高值化利用是当下重要的研究内容之一。脱硅处理不仅可实现硅的资源化利用,同时可以实现炭材料的结构改性。本文开展了残渣炭煮溶脱硅研究,并基于最佳脱硅方式,探究不同金属M（M：Ho、Sb、La、Nd）对无硅残渣炭（FRB）催化剂的脱硝性能的影响规律。结果表明：煅烧预处理结合煮溶脱硅可以脱除99%以上的SiO2,脱硅的同时理化性质显著改善,表现出较大的比表面积（1923 m2/g）、丰富的介/微孔结构以及表面含氧官能团,并促进了催化剂的SCR反应活性（250℃时NOx脱除率可达100%）。此外,Ho改性无硅残渣炭脱硝催化剂具有最好的低温脱硝活性,在200~300℃范围内保持80%以上的脱硝效率。表征结果显示,MnCeHo/FRB催化剂具有较强的表面酸性和氧化还原性,活性组分在载体上均匀分散,且表面化学吸附氧较为丰富。此外,In-situ DRIFTs实验表明MnCe/FRB催化剂表面同时存在E-R和L-H机理,但E-R机理占主要地位。