LECO CS-600高频红外碳硫仪故障分析与排除

简单介绍了Leco公司CS-600高频红外碳硫仪的一些典型故障的处理过程,总结了维修的思路和方法.     

反射式红外传感器在智能型节水系统中的应用

利用反射式红外传感器和少量的电子器件(单稳态触发器),研制了智能型节水控制系统。该系统能够识别是否有人入厕,酌情产生冲洗信号, 躯动进水电磁阀开启,向浮球式水箱内注水,待注满足以冲刷干净所需的两水箱水后,便自动地切断电磁阀中电源,达到了既卫生又节约的目的。在某一教学楼应用该系统一年多来,与无使用此系统的同规模另一教学楼相比,节水约70％。该系统元件少、成本低、结构合理、工作可靠、安装容易、维修方便,有广阔的应用前景。     

Molecular view of copper deposition chemistry: (Hexafluoroacetylacetonate)Cu(vinyltrimethylsilane) on a Si(1 0 0)-2 × 1 surface

The chemistry of a common copper deposition precursor, (hexafluoroacetylacetonate)Cu(vinyltrimethylsilane), (hfac)Cu(VTMS), on a single crystal Si(1 0 0)-2 × 1 surface is described at the molecular level using a combination of experimental surface analytical techniques under ultra-high vacuum conditions with computational analysis. At a cryogenic temperature of 100 K, (hfac)Cu(VTMS) adsorbs on this surface molecularly, without noticeable decomposition. Upon surface annealing, VTMS is easily released into the gas phase below the room temperature, while the hfac ligand is bound to the surface through the copper atom. When (hfac)Cu(VTMS) is adsorbed at room temperature, VTMS is released into the gas phase immediately, leaving surface adsorbate analogous in structure to the one formed by adsorption at cryogenic temperature and a brief annealing to room temperature. Upon surface annealing, the hfac ligand decomposes and constitutes the main source of impurities in copper deposition process.     

重频XeF(C-A)蓝绿激光器中XeF2浓度的监测与控制

介绍了采用光谱吸收法实时监测重复频率XeF(C-A)蓝绿激光器中XeF2气体浓度的原理和控制XeF2气体浓度的方法;给出了监测窗中XeF2气体浓度与激光器气室中的XeF2气体浓度之间的关系,获得了在不同主/载气路气流量条件下激光器气室中XeF2气体浓度值,通过调节主/载气路的气流量实现了对激光器腔室内XeF2气体浓度的控制,保证了XeF(C-A)蓝绿激光器1 Hz重频运行。     

A spectroscopic database for water vapor adapted to spectral properties at high temperature, and moderate resolution

The prediction of infrared spectral radiance from high temperature media such as combustion gases requires spectroscopic data for triatomic molecules like water vapor and carbone dioxyde. At temperature above 2000 K, water vapor spectrum is composed of hundreds of thousands lines making practical computations uneasy. We have set up a spectroscopic database for water vapor, based on three existing lines compilations. This database is well suited to computation of remote sensing spectra where hot gases emission is seen through atmospheric paths. The database enables efficient computation of water vapor spectra between 600 and 6600 cm⁻¹ at moderate spectral resolution (5 cm⁻¹). It has been used to compute parameters of a statistical narrow band model which are used in practical applications.     

Temperature dependent responsivity of quantum dot infrared photodetectors

Temperature dependent behavior of the responsivity of InAs/GaAs quantum dot infrared photodetectors was investigated with detailed measurement of the current gain. The current gain varied about two orders of magnitude with 100 K temperature change. Meanwhile, the change in quantum efficiency is within a factor of 10. The dramatic change of the current gain is explained by the repulsive coulomb potential of the extra carriers in the QDs. With the measured current gain, the extra carrier number in QDs was calculated. More than one electron per QD could be captured as the dark current increases at 150 K. The extra electrons in the QDs elevated the Fermi level and changed the quantum efficiency of the QDIPs. The temperature dependence of the responsivity was qualitatively explained with the extra electrons.     

Spectroscopic and photoluminescence characteristics of Dy ions in lead containing sodium fluoroborate glasses for laser materials

Lead containing calcium zinc sodium fluoroborate (LCZSFB) glasses doped with different concentrations of trivalent dysprosium ions were prepared and investigated by the XRD, FTIR, optical absorption, photoluminescence and decay curve analysis. The experimentally determined oscillator strengths have been determined by measuring the areas under the absorption peaks and the Judd–Ofelt (J–O) intensity parameters were calculated using the least squares fit method. From the evaluated J–O parameters the radiative transition probability rates, radiative lifetimes and branching ratios were calculated for ⁴F_9/2 excited level. Room temperature photoluminescence spectra for different concentrations of Dy³⁺-doped LCZSFB glasses were obtained by exciting the glass samples at 386 nm. The intensity of Dy³⁺ emission spectra increases with increasing concentration of 0.1, 0.25, 0.5 and 1.0 mol% and beyond 1.0 mol% the concentration quenching is observed. The measuring branching ratios are reasonably high for transitions ⁴F_9/2→⁶H_15/2 and ⁶H_13/2, suggesting that the emission at 484 and 576 nm, respectively, can give rise to lasing action in the visible region. From the visible emission spectra, yellow–blue (Y/B) intensity ratios and chromaticity color coordinates were also estimated. The lifetimes of ⁴F_9/2 metastable state for the samples with different concentrations were also measured and discussed.     

Stabilization of novel multi-layer networks with noise-based nonlinear superior couplings via aperiodically adaptive intermittent pinning control

In this paper, novel multi-layer networks with superior couplings are proposed firstly which are established on a non-strongly connected digraph. Within the multi-layer networks, a nonlinear coupling based on white noises is introduced, which is the feature of superior couplings. We adopt aperiodically adaptive intermittent pinning control to stabilize the multi-layer networks. An concrete analysis framework about selecting the target vertex of the control is revealed. Aperiodically adaptive intermittent control is employed on the vertex systems of the first layer networks, to achieve the stabilization of the first layer networks, where the couplings of drift terms are treated as negative effects on stabilization. With the help of noise stabilization, the stabilization of the other layers networks is realized based on the stability of the first layer networks and the characteristics of the superior coupling that is based on white noises. By employing graph theory and the Lyapunov method, an almost sure exponential stabilization criterion of the multi-layer networks is acquired. As a subsequent result, the proposed theory is applied to a class of stochastic coupled oscillators with sufficient conditions being given to ensure their stability. Finally, a numerical example is provided to illustrate the feasibility of the stated theoretical results.     

Design rules of flexible assembly and inspection cells

Every leading institution and manufacturing company in the world is dealing with some aspects of flexible automation. This is because they have found that designing and making goods and products on order rather than for stock is the key issue in cutting manufacturing costs and lead time, and eventually staying in business in the future. This paper discusses the way in which this above outlined goal can be implemented in the assembly business, as well as giving design rules on how to design flexible assembly and inspection cells and systems. The rules are justified by solid model simulation and the author's industrial and laboratory experience.