Transition metal complexes with thiosemicarbazide-based ligands,IV: Synthesis and molecular structure of 5-nitrosalicylaldehyde S-methylisothiosemicarbazonato-piperidine-copper(II)

Summary The reaction of warmDMF solutions of Cu(II) perchlorate, 5-nitrosalicylaldehyde S-methylisothiosemicarbazone (H₂ L) and piperidine (Pip) yielded the paramagnetic (_eff=2.19 B.M.) Cu(L)Pip complex, whereL is the dianionic form of H₂ L, formed as a result of deprotonation of the phenolic hydroxyl and NH₂ group. Crystal data of the complex are: monoclinic P2₁,a=11.902(4),b=6.765(3),c=11.343(4)Å; =112.92°,V=841.20(8)ų,M=400.9,Z=2,d ₀=1.60 gcm^–3,d _c =1.58 gcm^–3,F(000)=424. The structure was refined to a residualR=0.047. The copper(II) ion is coordinated in a square-planar arrangement by the piperidine nitrogen and the NNO set of donor atoms ofL.

---

Komplexe der Übergangsmetalle mit Thiosemicarbazid-Liganden, IV. Synthese und molekulare Struktur von 5-Nitrosalicylaldehyd-S-methylisothiosemicarbazonato-piperidin-kupfer(II)

Zusammenfassung Durch die Reaktion in warmenDMF-Lösungen von Cu(II) Perchlorat, 5-Nitrosalicylaldehyd-S-methylisothiosemicarbazon (H₂ L) und Piperidin (Pip) wurde ein paramagnetischer Komplex (_eff=2.19 B.M.) Cu(L)Pip erhalten, wobeiL nach doppelter Deprotonierung (NH₂- und Phenolhydroxyl-Gruppe) als dianionische Form von H₂ L vorliegt. Die kristallographischen Daten des Komplexes sind: monokline Raumgruppe P2₁,a=11.902(4),b=6.765(3),c=11.343(4)Å, =112.92°;V=841.20ų,M=400.9,Z=2,d ₀=1.60 gcm^–3,d _c =1.58 gcm^–3,F(000)=424. Die struktur wurde bis zu einemR-Wert von 0.047 verfeinert. Die Koordination des Kupfers wird quadratisch-planar über den Piperidin-Stickstoff und die NNO-Donorhülle der Chelatliganden gebildet.

     

多组分光谱相关色谱及其在中药色谱指纺图谱分析中的应用

基于正交投影理论和相关色谱方法提出多组分光色谱方法提出多组分光谱相关 色谱。为克服联用色谱仪器的不等性噪声影响，采用目标组分投影前后的光谱夹角 余弦判据，判断不同的中药色谱指纹图谱的相关组分色谱峰簇。该方法为中药指纹 图谱的数据处理、合理评价以及中药谱效学的基本理论研究提供一种实用的工具。     

Forensic classification of ballpoint pen inks using high performance liquid chromatography and infrared spectroscopy with principal components analysis and linear discriminant analysis

Several varieties of blue ballpoint pen inks were analyzed by high performance liquid chromatography (HPLC) and infrared spectroscopy (IR). The chromatographic data extracted at four wavelengths (254, 279, 370 and 400 nm) was analyzed individually and at a combination of these wavelengths by the soft independent modeling of class analogies (SIMCA) technique using principal components analysis (PCA) to estimate the separation between the pen samples. Linear discriminant analysis (LDA) measured the probability with which an observation could be assigned to a pen class. The best resolution was obtained by HPLC using data from all four wavelengths together, differentiating 96.4% pen pairs successfully using PCA and 97.9% pen samples by LDA. PCA separated 60.7% of the pen pairs and LDA provided a correct classification of 62.5% of the pens analyzed by IR. The results of this study indicate that HPLC coupled with chemometrics provided a better discrimination of ballpoint pen inks compared to IR. The need to develop a suitable IR method for analysing blue ballpoint pen inks has been emphasized and it is hoped that the development of such a method would indeed provide a valuable tool for the non-destructive analysis of blue ballpoint pen ink samples for forensic purposes.     

Investigation on False Peak Phenomena in On-line Sweeping Technique in MEKC

ＩｎｔｒｏｄｕｃｔｉｏｎＭｉｃｅｌｌａｒｅｌｅｃｔｒｏｋｉｎｅｔｉｃｃｈｒｏｍａｔｏｇｒａｐｈｙ (ＭＥＫＣ)ｗａｓｉｎｖｅｎｔｅｄｔｏｅｘｔｅｎｄｔｈｅｕｔｉｌｉｔｙｏｆｃａｐｉｌｌａｒｙｅｌｅｃｔｒｏｐｈｏｒｅｓｉｓ(ＣＥ)ａｎｄｐｅｒｍｉｔｔｅｄｔｈｅｓｅｐａｒａｔｉｏｎａｎｄａｎａｌｙｓｉｓｏｆｎｅｕｔｒａｌｃｏｍｐｏｕｎｄｓ .ＢｕｔｊｕｓｔｌｉｋｅｏｔｈｅｒｍｏｄｅｓｏｆＣＥ ,ＭＥＫＣａｒｅｈａｍｐｅｒｅｄｂｙｔｈｅｌｏｗｃｏｎｃｅｎｔｒａｔｉｏｎｓｅｎｓｉｔｉｖｉｔｙｏｆｔｈｅｕｌｔｒａ …     

256元线阵PtSi SB-IRCCD热成像技术研究

本文简述了256元线阵PtSi肖特基势垒红外电荷耦合器件(以下简称SB-IRCCD)的基本工作原理,介绍了IRCCD热成像总体方案及该线阵图像传感器热成像系统的设计。系统设计采用了微机技术,利用Z80—CPU作为摄像机控制处理核心,配合专门的图像帧存贮器来进行图像处理,补偿器件均匀性,抑制固定图像噪声(FPN)及提高信噪比(S/N),降低最小可分辨温差。摄像机系统采用慢存快读的方式,实现显示标准化,与标准电视制式兼容,便于直接与标准视频记录,处理或分析设备接口。最后介绍模拟红外热成像实验情况。     

Real-time onboard wind and windshear determination,part 1: Identification

Standard wind identification techniques employed in the analysis of aircraft accidents are post-facto techniques; they are processed after the event has taken place and are based on the complete time histories of the DFDR/ATCR data along the entire trajectory. By contrast, real-time wind identification techniques are processed while the event is taking place; they are based solely on the knowledge of the preceding time histories of the DFDR/ATCR data.In this paper, a real-time wind identification technique is developed. First, a 3D-kinematic approach is employed in connection with the DFDR/ATCR data covering the time interval preceding the present time instant. The aircraft position, inertial velocity, and accelerometer bias are determined by matching the flight trajectory computed from the DFDR data with the flight trajectory available from the ATCR data. This leads to a least-square problem, which is solved analytically every seconds, with / small.With the inertial velocity and accelerometer bias known, an extrapolation process takes place so as to predict the inertial velocity profile over the subsequent -subinterval. At the end of this subinterval, the extrapolated inertial velocity and the newly identified inertial velocity are statistically reconciled and smoothed. Then, the process of identification, extrapolation, reconciliation, and smoothing is repeated. Subsequently, the wind is computed as the difference between the inertial velocity and the airspeed, which is available from the DFDR data. With the wind identified, windshear detection can take place (Ref. 1).As an example, the real-time wind identification technique is applied to Flight Delta 191, which crashed at Dallas-Fort Worth International Airport on August 2, 1985. The numerical results show that the wind obtained via real-time identification is qualitatively and quantitatively close to the wind obtained via standard identification. This being the case, it is felt that real-time wind identification can be useful in windhsear detection and guidance, above all if the shear/downdraft factor signal is replaced by the wind difference signal (Ref. 1).This paper and its companion (Ref. 1) are based on Refs. 2–4.This research was supported by the Aviation Research and Education Foundation and by Texas Advanced Technology Program, Grant No. TATP-003604020.     

Electric field effects on roto-vibrational transitions of13CD3OH1

We used a Stark-Optoacoustic cell and hybrid waveguide resonators to perform an Infrared and Far Infrared Stark Spectroscopy study on some transitions of¹³CD₃OH. Different behaviours of the transitions in the presence of a d.c. electric field were observed. The Stark splittings of six FIR laser lines ranging from 34 to 136 MHz/kVcm^–1 were determined. The analysis of the behaviour of the IR and FIR transitions in the presence of the external electric fields gives important and exclusive information on the levels involved in the transitions.Work Supported by FAPESP, CNPq, FAEP - Brazil, and CNR - Italy.     

Three Potential Elements of Developing Nerve Guidance Conduit for Peripheral Nerve Regeneration

Autograft replaced by a nerve guidance conduit (NGC) is challenging in peripheral nerve injury because current NGC is still limited by precise conductivity and excellent biocompatibility in vivo, which influences the peripheral nerve repair even for a long lesion gap repair. Several particular elements have the potential function for nerve conductivity acceleration based on the traditional three factors of neural tissue engineering. The review aims to address three questions: 1) What is the superior factor for nerve conduction in the application? 2) How can a more conductive regenerative scaffold be constructed in vivo? 3) What is the next step in nerve regeneration for NGC? The bibliometrics analysis of NGC-related references is adopted to acquire that the conductive material, manufacturing technology of neural scaffold, and electrical stimulation (ES) play essential roles in the acceleration of nerve conduction. This review visually analyses the research status and summarizes the main types of conductive materials, the manufacturing technologies of neural scaffolds, and the characteristics of ES. The viewpoints and outlook of developing NGC are also discussed in this review. The proposed three elements are expected to improve the nerve conduction of NGC in vivo and even address the dilemma of long-distance peripheral nerve injury.     

基于紫外光刻的双轴张应变Ge/SiGe多量子阱电吸收调制器北大核心CSCD

采用紫外光刻工艺(ultraviolet lithography technique,UVL),在互补金属氧化物半导体(complementary metal oxide semiconductor,CMOS)兼容的硅基平台上制作了基于悬空微桥结构在Ge/SiGe多量子阱材料中引入双轴张应变的低偏振相关电吸收调制器。利用拉曼光谱测试了器件引入双轴张应变的大小,并对器件在横电(transverse electric,TE)偏振和横磁(transverse magnetic,TM)偏振下的光电流响应、调制消光比和高频响应等性能进行了测试。器件的低偏振相关消光比在0 V/4 V工作电压下可达5.8 dB,3 dB调制带宽在4 V反向偏置电压时为8.3 GHz。与电子束光刻工艺(electron beam lithography technique,EBL)相比,采用UVL制作的器件在调制消光比、高频响应带宽等性能上略差一点,但具有曝光时间短、成本低和可大批量生产等优势,应用前景广阔。     

SOME BLENDING INTERPOLATION METHODS IN CAGD

Some of the blending interpolation methods (which) stated by a convex combination technique are presented. This includes C1 ,C2 blending triangular interpolanls and C1 -blending quadrilateral inter polanls for surfaces. The mentioned methods can be generalized to the construction of C" blending interpolants.