4,4′-Dipyridyl and 2,2′-dipyridyl complexes of rare-earth perchlorates

4,4-Dipyridyl and 2,2-dipyridyl complexes of rare-earth perchlorates of the formulaLn(4-dipy)₈(ClO₄)₃HClO₄ · 4H₂O (Ln=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Yb, Lu, Y, 4-dipy=4,4-dipyridyl) andLn(2-dipy)₃(ClO₄)₃ · 6H₂O (Ln=Pr, Sm, Eu, Gd, Tb, Dy, Ho, Er, Yb, Lu, Y, 2-dipy = 2,2-dipyridyl) have been synthesized. The IR spectra of these compounds and other physical properties are discussed.

---

4,4-Dipyridyl- und 2,2-Dipyridylkomplexe von Seltenerdmetallperchloraten

Zusammenfassung Es wurden 4,4-Dipyridylkomplexe des TypsLn(4-dipy)₈(ClO₄)₃HClO₄ · · 4 H₂O mitLn=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Yb, Lu, Y und 2,2-Dipyridylkomplexe des TypsLn(2-dipy)₃(ClO₄)₃ · 6 H₂O mitLn=Pr, Sm, Eu, Gd, Tb, Dy, Ho, Er, Yb, Lu und Y dargestellt. Die IR-Spektren und andere physikalische Eigenschaften werden diskutiert.

     

The ν(OH/OD) band shape of strong hydrogen bonded dimers of phosphinic acids. Phenomenology and formation models

The infrared spectra of phosphinic acid R₂POOH dimers (R=CH₃, CH₂Cl, C₆H₅) have been studied in CCl₄ and CH₂Cl₂ solutions (T=300 K). The infrared spectra of deuterated R₂POOD dimers (R=CH₃, CH₂Cl) were also studied in the gas phase (T=400–550 K) and solid state (T=100–300 K). They are compared with previously studied spectra of the light (non-deuterated) dimers in the gas phase, in the solid state and in low-temperature argon matrices (T=12–30 K) in the 4000–400 cm⁻¹ spectral region. It is found that the strong and broad ν(OH) dimer bands have similar shapes, nearly equal values of bandwidth and low-frequency shift, and possess the Hadzi ABC structure irrespective of the type of acid, significant differences of dimerization enthalpies, influence of solvent, the type of H-bonded complexes (cyclic dimers in the gas phase, in solutions, and in inert matrices, and infinite chains in the solid state), and temperature in the range 12–600 K. Isotopic ratio of the first moments of light and deuterated acid bands has been measured. Analysis of the ν(OH/OD) band of hydrogen bonded dimers of phosphinic acids shows that the interaction between the two intermolecular bonds O–HOP in a cyclic complex plays virtually no role in the mechanism of the ν(OH/OD) band formation; the shape of ν(OH/OD) band is controlled mainly by the POOH(D)O fragment; and the band shape of strong hydrogen bonded complexes is formed by a number of vibrational transitions from the ground state to different combination levels in the region 3500–1500 cm⁻¹.     

Synthesis, crystal structure and mono-dimensional thallium ion conduction of TlFe0.22Al0.78As2O7

A new solid solution TlFe_0.22Al_0.78As₂O₇ has been synthesized by a solid-state reaction. The structure of the title compound has been determined from a single-crystal X-ray diffraction and refined to final values of the reliability factors: R(F²)=0.030 and wR(F²)=0.081 for 1343 independent reflections with I>2σ(I). It crystallizes in the triclinic space group P-1, with a=6.296(2) Å, b=6.397(2) Å, c=8.242(2) Å, α=96.74(2)°, β=103.78(2)°, γ=102.99(3)°, V=309.0(2) Å³ and Z=2. The structure can be described as a three-dimensional framework containing (Fe/Al)O₆ octahedra connected through As₂O₇ groups. The metallic units and diarsenate groups share oxygen corners to form a three-dimensional framework with interconnected tunnels parallel to the a, b and c directions, where Tl⁺ cations are located. The ionic conductivity measurements are performed on pellets of the polycrystalline powder. At 683 K, The conductivity value is 5.23×10⁻⁶ S cm⁻¹ and the ionic jump activation energy is 0.656 eV. The bond valence analysis reveals that the ionic conductivity is ensured by Tl⁺ along the [001] direction.     

Vibrational frequencies and structural determination of phosphirane

The normal mode frequencies and corresponding vibrational assignments of phosphirane in are examined theoretically using the GAUSSIAN 98 set of quantum chemistry codes. All normal modes were successfully assigned to one of nine types of motion (C–C stretch, P–C stretch C–H stretch, P–H stretch, CH₂ scissors, CH₂ wag, CH₂ rock, CH₂ twist, and P–H wag) predicted by a group theoretical analysis. Comparing the vibrational frequencies with IR and Raman spectra available in the literature, a set of scaling factors are derived. Predicted infrared and Raman intensities are reported.     

Cis- and trans-3-hexene: infrared spectrum in liquid argon solution, ab initio calculations of equilibrium geometry, normal coordinate analysis, and vibrational assignments

The infrared spectra of cis-3-hexene and trans-3-hexene dissolved in liquid argon have been obtained at temperatures from 93 to 120 K. The absorptions were observed with a low-temperature cell and a Fourier transform infrared spectrophotometer. Ab initio molecular orbital calculations were performed to obtain the equilibrium geometry, vibrational frequencies, force fields, and infrared intensities. The calculations were done at the Hartree-Fock level using 6-31G basis set. The Cartesian force fields from ab initio calculations have been converted to the force field in symmetry coordinates. The scale factors of ab initio calculated force fields were determined. Normal coordinate calculations were performed using a scaled quantum mechanical (SQM) force field. Vibrational normal modes calculated for the lowest energy rotamers of cis- and trans-3-hexene have been assigned to infrared absorption bands observed in liquid argon solution. The assignments were based on calculated frequencies and potential energy distributions. The equilibrium geometries of the two lowest energy rotamers (symmetry C₂ and C_s) of cis-3-hexene and of the three lowest energy rotamers (symmetry C_i, C₂, and C₁) of trans-3-hexene were calculated. Variable temperature studies of the infrared spectrum of cis- and trans-3-hexenes dissolved in liquid argon were done to obtain the ΔH of conversion between the rotamers C₂ and C_s of cis-3-hexene and between the rotamers C_i, C₂, and C₁ of trans-3-hexene.     

The MPE/UCB far-infrared imaging Fabry-Perot interferometer (FIFI)

FIFI is an imaging spectrometer with two or three Fabry-Perot interferometers (FPI) in series for airborne astronomical observations in the far-infrared range (=40...200m). It employs 5×5 arrays of photoconducting detectors and offers spectral resolutions as small as 2km/s. Resolution and bandwidth can be set over a wide range to match a variety of astronomical sources. Cryogenic optics minimizes thermal background radiation and provides for in-flight step tunable spatial resolution. At 158 m wavelength the background-limited NEP is 3 × 10^-15W/Hz at 40 km/s resolution and with two FPI's; with three FPI's the expected NEP is 10^-15WHz at 5 km/s resolution.The frequency-chopping mode of the high-resolution Fabry-Perot allows for line detection in extended objects. Absolute internal flux calibration ensures adequate flat fielding of the array elements.     

Photoinduced rotational isomerization mechanism of 2-chlorobenzaldehyde in low-temperature rare-gas matrices by vibrational and electronic spectroscopies

Rotational isomerization of 2-chlorobenzaldehyde in low-temperature rare-gas matrices has been investigated by vibrational and electronic spectroscopies with aids of the density functional theory (DFT) and configuration interaction single (CIS) calculations. Infrared spectrum of the less stable O-cis isomer, produced from the more stable O-trans isomer upon UV irradiation, is measured with an FT-IR spectrophotometer. The enthalpy difference between the O-cis and O-trans isomers is estimated to be 9.7±0.2 kJ mol⁻¹ from the temperature dependence of the infrared band intensities. Analyses of the infrared and electronic absorption spectral changes after UV irradiation and the phosphorescence spectra measured at various excitation wavelengths suggest that the rotational isomerization occurs via the intersystem crossing from S₁ to T₁.     

Dynamics of gel isoelectric focusing with ampholytic dyes monitored by camera in real-time

The dynamics of gel isoelectric focusing were studied by using amphoteric low-molecular-mass colored substances (isoelectric point markers). The polyacrylamide gel in slab format was in direct contact with the electrodes. In addition to isoelectric focusing with a pH gradient composed of synthetic carrier ampholytes, pH gradients created by simple buffers of acetic acid, 2-(N-morpholino)ethanesulfonic acid, histidine and N,N,N',N'-tetramethylethylenediamine were applied. The progress of the electrofocusing process was monitored by a charge-coupled device camera and video recording. The gradient profile and dynamics were approximated from the positions of isoelectric point markers, which were focused both on boundaries between individual zones of simple buffers and within the zones themselves. The obtained animated records enabled the observation of the entire real focusing run within fractions of a minute, which is useful both for the understanding and optimization of the focusing.     

Efficient synthesis of magnetic nanoparticle-Musa acuminata peel composite for the adsorption of anionic dye

The impregnation of magnetite (Mt) nanoparticle (NPs) onto Musa acuminata peel (MApe), to form a novel magnetic combo (MApe-Mt) for the adsorption of anionic bromophenol blue (BPB) was studied. The SEM, EDX, BET, XRD, FTIR and TGA were used to characterize the adsorbents. The FTIR showed that the OH and CO groups were the major sites for BPB uptake onto the adsorbent materials. The average Mt crystalline size on MApe-Mt was 21.13 nm. SEM analysis revealed that Mt NPs were agglomerated on the surface of the MApe biosorbent, with an average Mt diameter of 25.97 nm. After Mt impregnation, a decrease in BET surface area (14.89 to 3.80 m²/g) and an increase in pore diameter (2.25–3.11 nm), pore volume (0.0052–0.01418 cm³/g) and pH point of zero charge (6.4–7.2) was obtained. The presence of Pb(II) ions in solution significantly decreased the uptake of BPB onto both MApe (66.1–43.8%) and MApe-Mt (80.3–59.1%), compared to other competing ions (Zn(II), Cd(II), Ni(II)) in the solution. Isotherm modeling showed that the Freundlich model best fitted the adsorption data (R² > 0.994 and SSE < 0.0013). In addition, maximum monolayer uptake was enhanced from 6.04 to 8.12 mg/g after Mt impregnation. Kinetics were well described by the pseudo-first order and liquid film diffusion models. Thermodynamics revealed a physical, endothermic adsorption of BPB onto the adsorbents, with ΔH^o values of 15.87–16.49 kJ/mol, corroborated by high desorption (over 90%) of BPB from the loaded materials. The viability of the prepared adsorbents was also revealed in its reusability for BPB uptake.     

Electrochemical Detection of Protons Produced in an Electrode Reaction Using Interdigitated Microarray Electrodes

This work describes the use of interdigitated array electrodes (IDAE) for proton detection. Methanol electrooxidation in sulfuric acid solution was exemplified. Reduction currents originating in the reaction product generated by methanol electrooxidation on a Pt generator electrode were observed at the Pt collector electrode, the potential of which was fixed in the hydrogen evolution region. In order to reduce the background current of hydrogen evolution, an Hg‐plated Pt collector electrode was fabricated. Compared to the Pt collector electrode, the reduction current observed at the Hg collector electrode was extremely small. The product detected was found to be a proton from the current responses observed at Pt and Hg collector electrodes.