Ionization of aqueous toluic acids: Conductance and thermodynamics

Conductivities of aqueous solutions ofortho-, meta-, andpara-toluic acids have been measured for the concentration range 0.1–2 millimolar and at 5° intervals from 5 to 100°C. At each temperature pK _a(m) andA ₀ have been calculated using the paired ion model recently described by Fuoss. Thermodynamic parameters have been calculated for the ionization of each acid, and Walden products for the anions. Results are discussed in terms of contributions to acidity by enthalpy and entropy changes as well as by hydration of the various solute species.     

Entropy evaluation using the kinetic method: is it feasible?

The kinetic method is one of the most widely used experimental techniques for the measurement of thermochemical parameters by mass spectrometry. Recently it has been realized that it can also be used to determine reaction entropies, but the validity of this approach has not been established. This Perspective evaluates kinetic method plots in cases where there is a significant entropy difference between the competing fragmentation channels (i.e. between sample and reference compounds in the dissociating cluster ion). The concept underlying this study is to calculate mass spectra theoretically, based on known thermochemical parameters and as a function of experimental conditions. This can be done accurately using the RRKM-based MassKinetics software. The resulting mass spectra are then interpreted by the kinetic method, yielding DeltaH and DeltaS values. These values are, in turn, compared with the true values used to generate the calculated mass spectra. The results show that the reaction entropy difference between sample and reference has a very large influence on kinetic method plots. This should always be considered when studying energy-dependent mass spectra (using metastable ions or low- or high-energy collision-induced dissociation (CID)), even if only DeltaH is to be determined. Kinetic method plots are not strictly linear and this becomes a serious issue in the case of small molecules showing a large entropy effect. In such cases, results obtained at a low degree of excitation are more accurate. Energy and entropy effects can be evaluated in a relatively straightforward manner: first, the apparent Gibbs energy (DeltaG(app)) and effective temperature (T(eff)) are determined from kinetic method plots (intercept and slope, respectively), obtained from experiments using various degrees of excitation. Second, the resulting DeltaG(app) is plotted against T(eff), the slope yielding DeltaS while the intercept (extrapolation to zero temperature) yields DeltaH. This data evaluation yields more accurate results than alternative methods used in the literature. The resulting DeltaH values are fairly accurate, with errors, in most cases, <4 kJ mol(-1). On the other hand, DeltaS is systematically underestimated by 20-40%. Empirically scaling DeltaS values determined by the kinetic method by 1.35 results in a DeltaS value within 20% (or 10 J mol(-1) K(-1)) of the theoretical value.     

Thermodynamic characteristics of thermal dissociation of platinum tetrachloride

The pressure of thermal dissociation of platinum tetrachloride by the first step PtCl₄(s) = PtCl₃(s) + 0.5 Cl₂(g) was measured by the static method with a quartz membrane-gauge zero-pressure manometer. An approximating equation for the dissociation pressure vs. temperature was found. The enthalpy (52160±880 J mol⁻¹) and entropy (72.1±1.6 J mol⁻¹ K⁻¹) of dissociation were calculated. The heat of formation found for platinum tetrachloride (−246.3±1.3 kJ mol⁻¹) at 298.15 K agrees well with the value obtained by the calorimetric method (−245.6±1.9 kJ mol⁻¹).__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2028–2031, October, 2004.     

Enthalpies of mixing of <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">m</Emphasis>-isomers at 298.15 K

Excess enthalpies (H ^E) of 17 binary mixtures of o- and m-isomers of dichlorobenzene, difluorobenzene, methoxymethylbenzene, dimethylbenzene, dimethoxybenzene, aminofluorobenzene, fluoronitrobenzene, diethylbenzene, chlorofluorobenzene, fluoroiodobenzene, bromofluorobenzene, chloromethylbenzene, fluoromethylbenzene, bromomethylbenzene, iodomethylbenzene, fluoromethoxybenzene, dibromobenzene at 298.15 K were measured. All excess enthalpies measured were very small, and those of o-+m-isomers of aminofluorobenzene, dibromobenzene and iodomethylbenzene were negative but 14 other binary mixtures of isomers were positive over the whole range of mole fractions. H ^E of o-+m-isomers of dimethoxybenzene showed the largest enthalpic instability and those of aminofluorobenzene showed the largest enthalpic stability. There was a correlation between dipole–dipole interaction, dipole–induced dipole interaction or entropies of vaporization and excess partial molar enthalpies at infinite dilution.     

Estimation of the absolute internal-rotation entropy of molecules with two torsional degrees of freedom from stochastic simulations

A method of statistical estimation is applied to the problem of evaluating the absolute entropy of internal rotation in a molecule with two torsional degrees of freedom. The configurational part of the entropy is obtained as that of the joint probability density of an arbitrary form represented by a two-dimensional Fourier series, the coefficients of which are statistically estimated using a sample of the torsional angles of the molecule obtained by a stochastic simulation. The internal rotors in the molecule are assumed to be attached to a common frame, and their reduced moments of inertia are initially calculated as functions of the two torsional angles, but averaged over all the remaining internal degrees of freedom using the stochastic-simulation sample of the atomic configurations of the molecule. The torsional-angle dependence of the reduced moments of inertia can be also averaged out, and the absolute internal-rotation entropy of the molecule is obtained in a good approximation as the sum of the configurational entropy and a kinetic contribution fully determined by the averaged reduced moments of inertia. The method is illustrated using Monte Carlo simulations of isomers of stilbene and halogenated derivatives of propane. The two torsional angles in cis-stilbene are found to be much more strongly correlated than those in trans-stilbene, while the degree of the angular correlation in propane increases strongly on substitution of hydrogen atoms with chlorine.     

ViscosityB-coefficients,structural entropies and heat capacities,and the effects of ions on the structure of water

The water-structural contributions to the entropies and heat capacities of hydration of over 120 ions and the viscosity B-coefficients of nearly 80 aqueous ions are tabulated and correlated. B-coefficients for many more ions are predicted from this relationship and from their dependence on ionic size and charge. The structural entropies determine a unique scale of water structure making and breaking by the ions.     

The impact of LIMS design and functionality on laboratory quality achievements

 A laboratory information management system (LIMS) can make a major contribution to the quality and therefore to the efficiency and competitiveness of a laboratory. Since it can impact all aspects of a laboratory's organization it must be the key if not the principal player of the laboratory's quality system. It should support the laboratory in establishing, maintaining and applying quality procedures thereby enabling the laboratory to achieve its quality goals. As a tool, LIMS permits the laboratory to input and use its own know-how and experience to optimize the total organization (internal and external) and workflow of generated information. However, perceived "quality" in the context of an LIMS, can be viewed as being made up of different facets such as the security, reliability and accessibility of information as well as its turn around time and production cost. This paper reviews the role of a LIMS in the laboratory and the contribution that both system design and functionality can have on "building quality ". Received: 5 October 1998 · Accepted: 20 October 1998     

THERMODYNAMIC STUDY OF ADSORPTION OF PHENOLIC COMPOUNDS FROM AQUEOUS SOLUTION BY A WATER-COMPATIBLE HYPERCROSSLINKED POLYMERIC ADSORBENT

Equilibrium data for the adsorption of phenolic compounds, i.e., phenol, p-cresol, p-chlorophenol and p-nitrophenol from aqueous solutions by a water-compatible hypercrosslinked polymeric adsorbent (NJ-8) within temperature range of 283-323 K were obtained and correlated with a Freundlich-type of isotherm equation, so that equilibrium constants KF and n were obtained. The capacities of equilibrium adsorption for all the four phenolic compounds on the NJ-8 from aqueous solutions are around 2 times as high as those of Amberlite XAD-4, which may be attributed to the unusual micropore structure and the partial polarity on the network. The values of the enthalpy (always negative) are indicative of an exothermic process, which manifests the adsorption of all the four phenolic compounds on the two polymeric adsorbents to be a process of physical adsorption. The negative values of free energy change show that the solute is more concentrated on the adsorbent than in the bulk solution. The absolute free energy values of adsorption for NJ-8 are always higher than those for Amberlite XAD-4, which indicates that phenolic compounds are preferentially adsorbed on NJ-8. The negative values of the adsorption entropy are consistent with the restricted mobilities of adsorbed molecules of phenolic compounds as compared with the molecules in solution. The adsorption entropy values of phenolic compounds for NJ-8 are lower than those for Amberlite XAD-4, which means the micropores of NJ-8 require more orderly arranged adsorbate.     

Information content of data and variables and types of weighting in least-squares regression methods

Algorithms are given for evaluating the relative amount of useful information related to a particular parameter which is carried by individual data points and intervals of the variables. The algorithms provide an efficient means of using the information contained in a set of data. Applications to the optimization of weighting in regression methods are described. Several informational and combined informational-statistical types of weighting are studied as a means of improving the accuracy and precision of the parameters obtained by non-linear regression.     

非缔合二元有机液体混合物过剩热容的测定与计算

溶液的过剩热容是热力学的重要函数，对其测定与研究具有理论与实际意义．过剩热容不仅可检验溶液中分子间的相互作用，并可利用其计算混合物的热容．本文报告了用微量热仪对环乙烷一本等七个二元物系全浓度范围内在29815K、常压下过剩热容CEp进行的测定工作，上述体系是由具有