A computational analysis of the ballistic performance of light-weight hybrid composite armors

The ability of hybrid light-weight fiber-reinforced polymer-matrix composite laminate armor to withstand the impact of a fragment simulating projectile (FSP) is investigated using a non-linear dynamics transient computational analysis. The hybrid armor is constructed using various combinations and stacking sequences of a high-strength/high-stiffness carbon fiber-reinforced epoxy (CFRE) and a high-ductility/high-toughness Kevlar fiber-reinforced epoxy (KFRE) composite laminates of different thicknesses. The results obtained indicate that at a fixed thickness of the armor both the stacking sequence and the number of CFRE/KFRE laminates substantially affect the ballistic performance of the armor. Specifically, it is found that the armor consisting of one layer of KFRE and one layer of CFRE, with KFRE laminate constituting the outer surface of the armor, possesses the maximum resistance towards the projectile-induced damage and failure. The results obtained are rationalized using an analysis of the elastic wave reflection and transmission behavior at the inter-laminate and laminate/air interfaces.     

低能入射电子与中性锂原子的碰撞激发截面

近耦合近似下，采用Ｒ－矩阵方法求解耦合的积分微分方程，给出低能电子与中性锂原子的碰撞激发截面，并与实验数据和其它理论计算数据进行了比较。     

Joint experimental and computational study of aluminum electron energy loss spectra

Experimental reflection electron energy loss (REEL) spectra are measured from aluminum for primary energies ranging from 130 eV to 2 keV. A Monte Carlo simulation is shortly described and used to calculate the same spectra. The focus is on reproducing the variable weight of surface and bulk losses as the surface sensitivity of spectra changes by changing the primary electron energy. The intensity of surface losses in the simulations is modulated by the thickness of the region where surface excitations occur. Simulations based either on a constant or an energy-dependent thickness for this layer are considered. In both cases, simulated spectra reproduce the experimental trend as a function of energy, though the correct surface-to-bulk intensity ratio for each energy is either underestimated or overestimated.     

The Influence of Copolymerization Condition on Rheology,Morphology and Thermal Behavior of Polypropylene Heterophasic Copolymers

In this work, the polypropylene impact copolymers were synthesized by a modified sequential polymerization process. The copolymerization of ethylene and propylene was carried out between two homopolymerization stages at two different pressures and temperatures and the rheology, morphology and thermal properties of reactor alloys were studied. It is found that the ethylene propylene rubber (EPR) content increased up to 32 wt% by increasing the copolymerization time to 20 min. At a fixed copolymerization time of 10 min, the addition of 50 ppm hydrogen (H₂), increased the EPR content from 9.7 to 12.8 wt%. By doubling H₂ concentration, no considerable change in EPR wt% was observed. It is found that the zero shear viscosity of the alloys is significantly under the influence of EPR wt%, not the molecular weight of matrix. The molecular weight of PP matrices determined by rheological data, mildly decreased from 463000 to 458000 g/mol by increasing the copolymerization time from 10 min to 15 min. At high copolymerization time/high H₂ concentration, a melting peak in the differential scanning calorimetry test around 165°C for isotactic PP and also an endothermic peak around 127°C for the block copolymer with long ethylene segments, is observed. The study of interfacial strength by theoretical emulsion models showed that 15 min copolymerization time is optimum considering EPR wt%.     

HIGH INDEX OPTICAL MATERIALS PREPARED BY COPOLYMERIZATION OF NOVEL BIFUNCTIONAL THIOMETHACRYLATES

Optical materials, such as ophthalmic lens, are thermosetting resins, which require crosslinking agents. An optical resin, having a high refractive index, is usually produced by radical copolymerization in which high index crosslinking monomers are significantly important. We provide here the resins prepared by radical polymerization of novel bifunctional thiomethacrylates as high index crosslinkers.     

气候变化对持久性有机污染物环境过程与生态效应的影响

气候变化对持久性有机污染物(POPs)的影响是目前环境科学领域普遍关注的热点问题。本文介绍了气候变化如何影响POPs向环境的排放、长程传输、环境归趋和对人类与环境的暴露。同时,也强调减缓气候变化的政策和措施与POPs的消除和管理之间的协同作用。为了更好地在国家、区域以及全球成功履行《斯德哥尔摩公约》,本文基于现有的关于POPs和气候变化相互影响效应的知识,从管理和政策层面上给出了建言。     

纳米级金红石型二氧化钛与受阻胺光稳定剂协同改进ABS的抗老化性能研究

分别采用纳米级金红石型TiO2和受阻胺光稳定剂(HALS)对ABS进行改性,通过熔融共混法制备了ABS/纳米TiO2、ABS/纳米TiO2/HALS和ABS/HALS复合材料,采用GB/T16422.2~1999所述的塑料实验室光源暴露实验方法,用氙灯气候试验机对其进行28天人工加速老化,通过测定其老化过程中的无缺口和缺口试样冲击强度的变化来对其抗老化性能进行表征,同时利用光学显微镜和扫描电镜对其老化过程中的冲击断口形貌变化进行了研究.结果表明,纳米TiO2在ABS基体中分散良好,改性后的复合材料均具有较好的抗老化性能,纳米TiO2与HALS复合改性ABS对其耐候性的提高具有明显的协同作用,其老化后的抗冲击性能超过了单一使用HALS或纳米TiO2的改性效果,老化28天后纯ABS树脂试样的无缺口冲击强度保持率只有20%左右,添加2.0 wt%纳米TiO2后,老化28天后的ABS/纳米TiO2/HALS复合材料试样的保持率则提高到47.9%,为纯ABS树脂试样的2.5倍.     

水下爆炸中气泡射流壁压特性实验研究

水下爆炸气泡射流载荷是中近场水下爆炸壁压载荷的重要组成部分, 将水下爆炸气泡射流简化为一段高速水柱来研究水下爆炸气泡射流载荷特性是研究水下爆炸气泡射流载荷的主要手段。本文基于腔内爆炸提出了一种新的高速水射流实验方法,并给出了实验装置设计、实验方法以及实验系统。基于实验系统,开展了不同工况下高速水射流的实验研究,研究了腔口位置、腔深对水射流形态的影响,并对水射流的形态形成因素进行了分析。使用压电型壁压传感器测得了水射流冲击壁压,给出了水射流冲击壁压的特性及其特点。实验结果表明：腔口位置与腔深是影响水射流端面形态的重要因素;生成的高速水射流冲击壁压峰值满足水锤理论。基于腔内爆炸的高速水射流实验方法能够应用于包括水下爆炸气泡射流在内的高速水射流形态、壁压特性的研究。

     

阀门关闭对低温盲支管水击的影响分析

采用SINDA/FLUINT软件建立了具有盲支管的低温加注管路模型,仿真计算得到了不同阀门关闭时间、盲支管长度、阀门关闭顺序、管径下的水击压力变化情况。结果显示,阀门关闭时间越短,造成盲支管内的压力变化越剧烈,形成较大的压力峰值,容易对管路造成损坏;在低温管路处于冷态的情况下,盲支管长度对盲支管内压力峰值影响不大;某一支路阀门关闭使得该阀前压力出现变化,对另一支路压力影响不大,在整个管路形成封闭腔后,阀门关闭造成系统压力急剧变化,影响较大;管径越大,阀门关闭时的水击压力峰值越大。