应用特征波段和反射变形差的方法进行土壤属性估算

传统的土壤分析是昂贵的、费时的并且可能带来环境污染问题。应用近红外光谱分析技术测定土壤参数具有快速、花费少和非破坏性的特点。利用GPS野外定位,在江西省的红壤站、鄱阳湖站和千烟州站周边共取得41个耕层(0～20 cm)土壤样品。通过对土壤样品高光谱反射率的室内分析测定,研究了土壤在紫外/可见光/近红外波段光谱的反射特性。研究的目的是应用波谱反射建立一个新的研究方法来估算土壤属性含量值。随后应用多元线性逐步回归方法对反射光谱数据进行分析,“B22+H13”光谱数据作为自变量,土壤属性含量作为因变量,建立了土壤属性含量的高光谱预测模型, 并对模型的稳定性和预测能力进行了检验。结果是土壤的pH、有机碳、全氮、全磷、阳离子代换量和碱解氮的相关系数都达到了0.80,而TK、速效磷、速效钾的相关系数在0.68左右。结果表明,应用此方法估算一些土壤属性含量是可行的。     

基于高斯回归分析的水稻氮素敏感波段筛选及含量估算

水稻氮素含量的准确监测是稻田精准施肥的重要环节,水稻叶片氮素含量发生变化会引起叶片、冠层的光谱发射率发生变化,高光谱遥感是目前作物氮素无损监测的关键技术之一.以2018年—2019年湖北监利两年水稻氮肥试验为基础,分别获取水稻分蘖期、拔节期、孕穗期、扬花期、灌浆期五个生育期水稻叶片和冠层两个尺度的高光谱反射率数据及对应...     

激光辐照PC型HgCdTe探测器的实验研究

分别用连续波1.319μm激光和10.6μm激光辐照PC型HgCdTe红外探测器时,得到了不同辐照光功率密度下,探测器输出的一系列实验结果。给出了在波长为1.319μm的波段内激光辐照下PC型HgCdTe探测器的饱和阈值;用波长为10.6μm的波段外CO2激光辐照探测器时,发现了一些与波段内激光辐照探测器时大不相同的实验现象;对实验结果进行了分析。简要总结了PC型HgCdTe探测器对于波段内和波段外激光辐照的响应机制。     

Efficient organic photovoltaic cells based on thiazolothiazole and benzodithiophene copolymers with π‐conjugated bridges

New donor–π–acceptor (D–π–A) type conjugated copolymers, poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(4‐octylthiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐tTz), and poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(6‐octylthieno[3,2‐b]thiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐ttTz) were synthesized and characterized with the aim of investigating their potential applicability to organic photovoltaic active materials. While copolymer PBDT‐tTz showed a zigzagged non‐linear structure by thiophene π‐bridges, PBDT‐ttTz had a linear molecular structure with thieno[3,2‐b]thiophene π‐bridges. The optical, electrochemical, morphological, and photovoltaic properties of PBDT‐tTz and PBDT‐ttTz were systematically investigated. Furthermore, bulk heterojunction photovoltaic devices were fabricated by using the synthesized polymers as p‐type donors and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester as an n‐type acceptor. PBDT‐ttTz showed a high power conversion efficiency (PCE) of 5.21% as a result of the extended conjugation arising from the thienothiophene π‐bridges and enhanced molecular ordering in the film state, while PBDT‐tTz showed a relatively lower PCE of 2.92% under AM 1.5 G illumination (100 mW/cm²). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1978–1988     

Some exact solutions of generalized Zakharov system

In this paper, we seek exact solutions of generalized Zakharov system. We use extended trial equation method to obtain exact solutions of this system. Consequently, we obtain some exact solutions including soliton solutions, rational, Jacobi elliptic and hyperbolic function solutions of this system by using extended trial equation method.     

Photosensitivity,substituent and solvent-induced shifts in UV-visible absorption bands of naphthyl-ester liquid crystals: a comparative theoretical approach

The substituent- and solvent-induced shifts in UV-visible absorption bands of naphthyl-ester nematic liquid crystals, viz., 4-octylphenyl-6-octyloxy-2-naphthoate (NAPHE1) and 6-octyloxy-2-naphthylyl-4-octyloxybenzoate (NAPHE2), have been investigated using the DFT, CNDO/S and INDO/S methods. A correlation has been made between molecular charge distribution and phase stability based on Mulliken, Loewdin, AM1, PM3, MNDO, CNDO/S and INDO/S methods. The observed π→π* and n→π* electronic transitions have been reported. The substituent- and solvent-induced shifts in absorption bands, transition energies and energy gaps have been discussed. The photosensitivity of the molecules has been analysed based on these shifts. It has been observed that the substituent has a dominant role on both absorption maxima and energy band gap, whereas the solvent has a dominant role only on absorption maxima, and no effect has been observed on the energy gap. These shifts may provide beneficial consequences in determining the end use of compounds.     

Isoregic Thienylene‐Phenylene Polymers: The Effects of Structural Variation and Application to Photovoltaic Devices

Isoregic conjugated polymers composed of thiophene and dialkoxybenzene units were designed to harvest incident light in the mid‐visible energy range (band gap of 2.1 eV). Poly(1,4‐bis(2‐thienyl)‐2,5‐diheptoxybenzene) (PBTB(OC₇H₁₅)₂) and poly(1,4‐bis(2‐thienyl)‐2,5‐didodecyloxybenzene) (PBTB(OC₁₂H₂₅)₂) have shown significant photovoltaic performance as an electron donor when used in tandem with the electron acceptor [6, 6]‐phenyl C₆₁‐butyric acid methyl ester (PCBM) in bulk hetero‐junction photovoltaic devices. Photovoltaic devices incorporating PBTB(OC₇H₁₅)₂ and PCBM have shown AM1.5 efficiencies of ～0.6% with a short circuit current density of 2.5 mA/cm², an open circuit voltage of 0.74 V, and a fill factor of 0.32. Incident Photon‐to‐Current Efficiency (IPCE) of the device was found to be ca. 16% at 410 nm. In order to examine the relationship between the molecular structure of the polymers and their electronic energy levels, and to correlate this with photovoltaic performance, optoelectronic and electrochemical results are discussed in relation to the I‐V characteristics of the devices. Additionally, a computer‐aided simulation is used to gain further insight into the effect of polymer structure on the energetic relationships in the bulk heterojunction devices.     

Y,Zr,Nb掺杂SnO_2电子结构的第一性原理研究

本文基于第一性原理方法研究了Y,Zr,Nb在Sn位掺杂SnO_2的键长变化、稳定性、能带结构以及态密度.结果表明:Y,Zr,Nb在Sn位掺杂SnO_2使附近的键长发生改变,改变量最大是Y掺杂SnO_2体系;掺杂体系的杂质替换能都为负值,表明体系为稳定结构;掺杂使SnO_2能级增多,能较好的调节带隙值;而Y掺杂SnO_2体系价带顶端有一条能级越过了费米线表明该体系呈现出半导体的特征;同时,Y,Zr,Nb掺杂SnO_2使导带底端的能级出现分离;在低能区的态密度仍主要由Sn、O的s轨道贡献;在高能区态密度的掺杂体系出现sp杂化的现象; Zr掺杂SnO_2的态密度能量向低能区移动.     

Synthesis and photovoltaic properties of conjugated side chains polymers with different electron‐withdrawing and donating end groups

A series of novel low band gap polymers containing conjugated side chains with 4,7‐dithien‐5‐yl‐2,1,3‐benzodiathiazole and different electron‐withdrawing end groups of aldehyde ( PT‐DTBTCHO ), 2‐ethylhexyl cyanoacetate ( PT‐DTBTCN ), 1,3‐diethyl‐2‐thiobarbituric acid ( PT‐DTBTDT ), and electron‐donating end group of 2‐methylthiophene ( PT‐DTBTMT ) have been designed and synthesized. All polymers exhibit good solubility in common organic solvents, film‐forming ability, and thermal stability. These conjugated polymers show the broad ultraviolet‐visible absorption and the narrow optical band gaps in the range of 1.65–1.90 eV. Through changing the end group of conjugated side chains, the photophysical properties and energy levels of the polymers were tuned effectively. Bulk heterojunction solar cells based on the blend of these polymers and (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) reached the best power conversion efficiency (PCE) of 2.72%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Carbon dioxide adsorption studies on delafossite CuFeO2 hydrothermally synthesized

Delafossite CuFeO₂ oxide was synthesized by a hydrothermal technique using Cu₂O and FeOOH as precursors with the addition of fused NaOH as mineralizer. The amount of rhombohedral and hexagonal delafossite phase formed depends on the synthesis time lapses between 2 and 5 days and on the NaOH concentration. The compounds obtained were analyzed with Raman Spectroscopy, X-Ray Diffraction (XRD), X-Ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) in order to obtain their morphological and structural properties. Optical behavior was studied by UV–vis Spectroscopy and gas adsorption measured with a Quartz-Crystal Microbalance (QCM). Our results show that this type of hydrothermal synthesis is capable of recreating the delafossite-type structure of copper-iron oxide and produces a high yield of material with the right stoichiometry. The highest uptake of carbon dioxide is observed on the sample with the highest ratio between rhombohedral and hexagonal delafossite phase.