用于泵浦固体激光器的激光二极管线阵的输出特性

从实验上测量了激光二极管线阵的输出特性,研究了温度、电流对输出功率、光谱特性,以及偏振特性的影响,为设计全固态激光器提供有益的参考。     

红外半导体激光光镊的实验研究

激光光镊技术是一项在许多科学领域有广阔应用前景的技术。本文详细给出构建一台红外半导体激光光镊的设计思想及实例。由于采用了独特的对大功率多模红外激光选模整形和双透镜陷阱操纵技术等性能价格最优化选择 ,该系统易于构建 ,陷阱操作方便 ,其构建价格仅一般光镊的几十分之一 ,非常适合光镊技术的推广和一般实验室构建     

Resonant-cavity-enhanced photodetectors and LEDs in the mid-infrared

In this paper we outline the use of resonant-cavity enhancement for increasing the exterior coupling efficiency of photodetectors and light-emitting diodes (LEDs) in the mid-infrared (MIR) spectral region. This method is potentially very important in the MIR because encapsulation is not presently feasible due to the lack of suitable materials. Among other potential applications, resonant-cavity-enhanced (RCE) photodetectors and LEDs could be particularly suitable for greenhouse gas detection because of their ‘pre-tunable’ spectrally narrowed resonantly enhanced peaks. We also present the optical characterization of an InAs RCE photodetector aimed at the detection of methane gas (λ≈3.3 μm), and an InAs/InAs_0.91Sb_0.09 resonant-cavity LED (RCLED) aimed at carbon dioxide gas (λ≈4.2 μm). The high peak responsivity of the RCE photodetector was 34.7 A/W at λ=3.14 μm, and the RCLED peaked at λ=3.96 μm. These are among the longest operating wavelengths for III–V RCE photodetectors and RCLEDs reported in the literature.     

1.30μmDFB激光器组件的设计和制做及其工作原理

本文自行设计和制作了１．３０μｍＤＦＢ激光器组件的讨论了光隔离和光耦合原理。由于采用的激光器－光隔离器－光纤的一体化结构，大大增加了该组件的可用性。在实验中得到高达５５％的耦合效率。     

一种可用于可调谐环行Ti：Al_2O_3激光器的宽带单向器

本文介绍一种宽带单向器的原理及设计。选用ＴＧＧ作磁旋光介质，旋光石英晶片作补偿片，所设计的色散补偿型宽带单向器预计可在７００～１０００ｎｍ波长范围内实现环行激光腔中的单向行波运行；将其应用在可调谐环行Ｔｉ：Ａｌ２Ｏ３激光器中，获得了良好的实验结果。     

一种新型有机电致微腔结构的双模发射

采用结构Glass／DBR／ITO／NPB／NPB：Alq／Alq／Al制作了有机微腔电致发光器件。将空穴传输材料与发光材料以一定比例混合作为发光层，为了便于对比，在不改变有机层的膜厚的情况下同时制作了传统的异质结微腔器件，发现两种器件的发光光谱有很大不同，器件的复合效率与传统的异质结器件相比也得到了很大提高，这是因为将两种有机材料混合能消除界面势垒，提高器件的复合效率，从而提高了器件的发光性能，实现了微腔双模发射，且两个模式的半峰全宽分别为8nm和12nm。通过进一步优化器件结构可以实现微腔白光发射。     

Analysis of Threshold Current and Wall-Plug Efficiency of Diode Lasers with Asymmetric Facet Reflectivity

Threshold current and differential quantum efficiency of broad contact lasers with asymmetric facet reflectivity are discussed with the purpose to reveal factors essential for optimisation of the wall-plug efficiency of such lasers. Lasers with low front facet reflectivity and short cavity often exhibit behaviour difficult to explain with a classical theory. More rigorous calculation performed in this work show that differential quantum efficiency is indeed less affected by a change of the front facet reflectivity or cavity length than predicted by such theory. These findings greatly simplify criteria for optimisation of the wall-plug efficiency of broad contact lasers with coated facets.     

高功率二极管泵浦固体激光技术和应用前景的分析

文章对高功率二极管泵浦固体激光器的若干关键技术，包括激光二极管和增益介质，泵浦，耦合和冷却技术，以及光学谐振腔等作了详细的分析。     

半导体激光器到单模光纤耦合技术的现状及发展趋势

简要阐述了半导体激光器到单模光纤的耦合损耗来源，详细介绍和分析了耦合技术的发展和现状，并探讨了耦合技术的发展趋势。     

荧光光纤温度传感器激励光源的选择

本文分析计算了荧光光纤温度传感器的温敏元件——GsAlAs/GaAs双异质结半导体材料的荧光辐射效率与激励光波长的关系。讨论了温度测量范围及温敏元件GaAlAs层铝含量对激励光源的限制,在0～200℃测温范围内,若采用LED作激励光源,其峰值波长应在0.70～0.76μm之间选择。