The polynomial dichotomy for three nonempty part sandwich problems

We classify into polynomial time or -complete all three nonempty part sandwich problems. This solves the polynomial dichotomy into polynomial time and -complete for this class of graph partition problems.     

基于ARM Cortex-M3的某新型装备信息采集系统设计

根据某新型装备特点,介绍了一种基于ARM Cortex-M3和SD卡的数据采集系统的硬件设计和软件设计。硬件部分包括信号调理电路、微控制器外围电路和SD卡接口电路三个方面。其中微控制器是基于ARM Cortex-M3微处理器设计的STM32F205VG,本设计采用微控制器自带的ADC模数转换器完成模数转换。软件部分包括系统软件和应用软件两部分,其中系统软件主要有主程序模块、初始化程序模块等;应用软件主要有信息采集、SD卡读写程序等。本系统设计采用ARM微处理器,充分利用了ARM的低功耗、高效率、体积小的优点,具有广泛的应用前景。     

Cure Kinetics Study of Two Epoxy Systems with Fourier Tranform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC)

This work was aimed at the study of cure kinetics of two commercial thermosetting epoxy systems, Epikote resin 816 LV/Epikure F205 and Epikote resin 240/Epikure F205, by Fourier Tranform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC). The studied systems consist of a resin (A), based on a diglycidyl ether of bisphenol A and a hardener (B) based on the Isophorodiamine (IPDA) a cycloaliphatic diamine. These systems are used for the building and civil engineering industries, e.g. flooring compounds, adhesives, mortars and grouts. FTIR spectroscopy was employed to investigate the isothermal curing kinetics at 30, 50 or 70°C and DSC analysis to study the non-isothermal curing kinetics at different heating rates 2.5, 5, 10 and 20°C/min, from 20 to 300°C. A kinetic model was employed to simulate the FTIR isothermal experimental data using two kinetic rate constants and incorporating also diffusion control at high degrees of conversion. Finally, the variation of the effective activation energy with the extent of curing was estimated using isoconversional analysis of non-isothermal DSC data.     

Femtosecond transmission studies of n-type and p-type hydrogenated amorphous silicon pumped in the exponential band tails

The results of transient transmission studies utilizing femtosecond laser pulses on n-type and p-type hydrogenated amorphous silicon are presented. In these studies, both the pump and probe photon energies are tuned through the exponential band tail region. The responses of the different materials are quite different, allowing the technique to clearly distinguish between them. It is shown that while recombination is dominant in intrinsic a-Si:H, trapping becomes important in the doped material. A model of the experimental results gives additional insight into the density of states in the band tail region.     

Late stage, non-equilibrium dynamics in the dipolar Ising model

Magnetic domain structures are a fascinating area of study with interest deriving both from technological applications and fundamental scientific questions. The nature of the striped magnetic phases observed in ultra-thin films is one such intriguing system. The non-equilibrium dynamics of such systems as they evolve toward equilibrium has only recently become an area of interest and previous work on model systems showed evidence of complex, slow dynamics with glass-like properties as the stripes order mesoscopically. To aid in the characterization of the observed phases and the nature of the transitions observed in model systems we have developed an efficient method for identifying clusters or domains in the spin system, where the clusters are based on the stripe orientation. Thus we are able to track the growth and decay of such clusters of stripes in a Monte Carlo simulation and observe directly the nature of the slow dynamics. We have applied this method to consider the growth and decay of ordered domains after a quench from a saturated magnetic state to temperatures near and well below the critical temperature in the 2D dipolar Ising model. We discuss our method of identifying stripe domains or clusters of stripes within this model and present the results of our investigations.     

TCA205/205A芯片的特性及应用

TCA205/205A是西门子公司生产的一种接近开关专用集成电路芯片,具有集成度高、工作电压宽、输出电流大、控制距离可调、外围电路简单、工作稳定可靠等特点,可广泛应用于各种接近传感器或各种接近控制系统中,也可利用该芯片制作多种感应式检测仪表。简要介绍了该芯片的组成结构和特性参数及其典型应用电路,并给出了其典型外围器件参数。     

The hypersurface over a field of arbitrary characteristic

We develop techniques for computing the AK invariant of domains with arbitrary characteristic. As an example, we show that for any field the ring is not isomorphic to a polynomial ring over .

     

73cm彩管殷钢材荫罩翘曲量超差的解决

从材料的物理特性分析入手，通过热处理(即退火，热成型)改变其部分物理特性，从而达到解决段钢材成型荫罩翘曲量超差的目的。     

Mechanical behaviour of highly porous glasses

The mechanical behaviour of highly porous glassy materials (pore volume higher than 85%) is investigated using Hg porosimetry. Because of the small pore size of these materials, Hg liquid cannot enter their porous network and consequently induces an isostatic pressure. Due to the high compliance of the solid network of these materials, compression results in the sample shrinkage. The experiments described in this paper show that an isostatic pressure applied to highly porous glasses induces an irreversible volume shrinkage which can be associated with an unexpected plastic behaviour and structure strengthening. The magnitude of the plastic shrinkage and the increase of the associated mechanical properties depend on the starting bulk density. The irreversible compaction can be explained by siloxane bond formation between clusters constituting the porous glasses, retaining the strained structure. This densification process could offer a new way to synthesise glasses at room temperature.