相控阵用收发(T/R)组件

本文简要评逆相控阵用收发(T/R)组件的特点及发展概况,介绍了几种收发组件的电路,即混合微波集成电路(HMIC)、微型混合微波集成电路(MHMIC)以及单片微波集成电路(MMIC),并讨论了收发组件的制造工艺、电路组成、封装测试和成品价格。     

二维离子注入的改进模型及数值模拟

本文提出了一个改进的二维离子注入模型.对于在任意形状掩蔽边界下的离子注入分布,我们在纵向采用联结的半高斯分布或修改过的Pearson-IV分布,在横向采用余误差函数分布,并且考虑了在多层掩蔽情况下各种材料阻止本领的不同.利用这一模型发展起来的离子注入模拟器能连续计算多次不同能量、剂量和杂质类型的注入分布,并考虑了多种不同掩蔽边界的影响.通过与其它工艺模拟器的比较,表明我们的模拟器在精度和功能上都有明显的改进.     

A novel iterative scheme for parallel inter-symbol interference channels

In this paper, we propose a novel iterative scheme for exploiting transmit diversity using parallel independent Inter-Symbol Interference （ISI） channels. In this adaptive iterative scheme, we use EXtrinsic Information Transfer （EXIT） chart tool to choose appropriate iterative method from Iterative Combining （IC）, used as parallel concatenation turbo-like scheme, and Turbo Equalization （TE）, used as serial concatenation turbo-like scheme. It is show that the proposed iterative scheme provides excellent performance both analytically and through simulations without any compute complexity increase comparable to IC.     

单行安置的算法

对一j= LSI/VLSI具有积木块的单元，rt卞L给出单f7安置的算法一般来说，给出矩形单元的相对位置后，须从Zw个状态中选出最优解.我们证明在单行安置时可归结为N个状态的问题，得到一种很有效的算法.此算i?;曾用Fortran语言编程并在IBM-PC机上通行，结果令人满意.     

高职机电类产学研项目转化为教学项目的研究与实施

高职院校教师在与企业开展紧密合作的过程中,开发了大量的新产品、新工艺和新技术,高职院校培养的人才要服务区域经济,对应的课程内容要与区域企业的实际相符合,因此,通过提炼可以把这些产学研项目带入到课堂中,转化为可以实施的教学项目,这样,可以提高学生的学习兴趣和成就感,从而提高教学效果,培养的人才更符合企业需求。本文以机电类的CAD/CAM实践课程为例,把产学研项目融进教学,详细介绍了课程的教学设计与教学效果。     

Impact of Multi-Component Surrogates on the Performances,Pollutants, and Exergy of IC Engines

Even though there is a pressing interest in clean energy sources, compression ignition (CI) engines, also called diesel engines, will remain of great importance for transportation sectors as well as for power generation in stationary applications in the foreseeable future. In order to promote applications dealing with complex diesel alternative fuels by facilitating their integration in numerical simulation, this paper targets three objectives. First, generate novel diesel fuel surrogates with more than one component. Here, five surrogates are generated using an advanced chemistry solver and are compared against three mechanisms from the literature. Second, validate the suggested reaction mechanisms (RMs) with experimental data. For this purpose, an engine configuration, which features a reacting spray flow evolving in a direct-injection (DI), single-cylinder, and four-stroke motor, is used. The RNG k-Epsilon coupled to power-law combustion models is applied to describe the complex in-cylinder turbulent reacting flow, while the hybrid Eulerian-Lagrangian Kelvin Helmholtz-Rayleigh Taylor (KH-RT) spray model is employed to capture the spray breakup. Third, highlight the impact of these surrogate fuels on the combustion properties along with the exergy of the engine. The results include distribution of temperature, pressure, heat release rate (HRR), vapor penetration length, and exergy efficiency. The effect of the surrogates on pollutant formation (NOX, CO, CO2) is also highlighted. The fifth surrogate showed 47% exergy efficiency. The fourth surrogate agreed well with the maximum experimental pressure, which equaled 85 Mpa. The first, second, and third surrogates registered 400, 316, and 276 g/kg fuel, respectively, of the total CO mass fraction at the outlet. These quantities were relatively higher compared to the fourth and fifth RMs.     

Characterization of polyethylenimine by electrospray ionization and matrix-assisted laser desorption/ionization

Branched polyethylenimines (PEIs) with lower average molecular weights (600, 1200 and 1800 Da) have been studied by Electrospray Ionization (ESI) and Matrix‐Assisted Laser Desorption/Ionization (MALDI) mass spectrometry. In both, ESI and MALDI mass spectra, the main distribution arises from protonated PEI oligomers with NH₂ end groups, [PEI + H]⁺, which are observed at m/z 43n + 18. A trace of sodium contamination in the PEI samples results in the presence of a series that appears at m/z 43n + 40 [PEI + Na]⁺. However, only the MALDI mass spectra show a [PEI + K]⁺ series at m/z 43n + 56, because of matrix contamination with potassium, and a series generated by condensation of the matrix with PEI at m/z 43n + 30. Collisionally activated dissociation tandem mass spectrometry (CAD (MS/MS)) of protonated PEI oligomers is shown to yield three fragment ion series b_n, and K_n. The experiments have demonstrated the capabilities of these mass spectrometry techniques, along with CAD MS/MS to detect and characterize such polar synthetic polymers. Copyright © 2011 John Wiley & Sons, Ltd.     

滤膜冷凝收集-离子色谱法测定固液气溶胶中5种水溶性阴离子北大核心CSCD

水溶性离子是固、液气溶胶的重要组成部分,对于气溶胶的理化性质和空气质量具有重大影响,研究水溶性离子的含量对于大气环境的污染与防治具有深远意义。该研究建立了一种滤膜冷凝收集-离子色谱技术采集固体气溶胶和液体气溶胶并测定其中的5种水溶性阴离子(Cl^(-)、F^(-)、NO^(-)_(3)、NO2^(-)、SO4^(2-))含量的方法。首先,采用固体颗粒过滤器和冷凝收集法分别收集固体气溶胶和液体气溶胶,固体气溶胶以固体颗粒物的形式被收集在固体颗粒过滤器内,液体气溶胶以冷凝液的形式在冷阱中被收集。其次,以离子色谱法对固、液体气溶胶中的水溶性阴离子含量进行检测。在以Dionex IonPac AS11-HC-4μm作为分析柱,流速为1 mL/min,柱温为30℃,淋洗液氢氧化钾(KOH)浓度在0~40 min内由1 mol/L线性增至25 mol/L,进样量100μL的条件下,各离子在40 min内有效分离,5种阴离子在0.1~10 mg/L范围内线性关系良好(相关系数为0.9992~0.9997),检出限低(0.02~0.04 mg/L)。对样品采集条件(采样时间、采样温度和采样流量)进行了优化,结果表明,在采样时间2 h、采样温度-13℃、采样流量1.0 L/min的条件下,可获得较为满意的结果。在优化的条件下分别对实际样品的两类溶胶中的5种阴离子含量进行了检测,测得实际样品的液体气溶胶中5种阴离子含量分别为5.7402μg/m^(3)(F^(-))、1.1599μg/m^(3)(Cl^(-))、3.3233μg/m^(3)(NO^(-)_(2))、2.4861μg/m^(3)(NO^(-)_(3))和0.9745μg/m^(3)(SO^(2-)_(4)),固体气溶胶中5种阴离子含量分别为14.1037μg/m^(3)(F^(-))、5.0398μg/m^(3)(Cl^(-))、9.3052μg/m^(3)(NO^(-)_(2))、8.4528μg/m^(3)(NO^(-)_(3))和5.6314μg/m^(3)(SO^(2-)_(4))。该方法可应用于实际的大气检测中,也为其他离子的采集和分析条件的摸索提供了方法。     

在线中和富集及标准加入离子色谱法测定大气吸收液中的痕量阴离子

建立了大体积进样后的在线中和富集及在线标准加入离子色谱法,实现了对大气碱性吸收液中痕量氯离子、亚硝酸根、硝酸根、硫酸根的直接测定。比较了不同阀切换时间窗及在线中和柱的选择,确定了最佳的实验条件。利用戴安公司“谱睿”在线中和技术,通过Inguard H在线中和柱和CRD 200在线二氧化碳去除装置的共同作用,有效地去除了碱性吸收液中的OH~和CO2~3,使测定干扰降低到最小;通过大体积进样和在线富集,改进了样品的检出限,Cl~, NO~2, NO~3和SO2~4的检出限分别为17.5、171、34.7和42.4 ng/L;在线标准加入解决了痕量阴离子标准溶液的配制难题及NO~2低回收率对检测结果的影响。本方法实现了自动化分析,结果准确,重复性好,检测效率高,可用于常规离子色谱条件下无法测定的强碱性基体样品中痕量阴离子的准确测定。