Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Synthesis,spectral investigation and development of tetrahedral copper(II) complexes as artificial metallonucleases and antimalarial agents

Seven new copper(II) complexes of type [Cu(A)(L)]?H₂O (A = sparfloxacin, ciprofloxacin, levofloxacin, gatifloxacin, pefloxacin, ofloxacin, norfloxacin; L = 5‐[(3‐chlorophenyl)diazenyl]‐4‐hydroxy‐1,3‐thiazole‐2(3H)‐thione) were synthesized and characterized using elemental and thermogravimetric analyses, and electronic, electron paramagnetic resonance (EPR), Fourier transform infrared and liquid chromatography–mass spectroscopies. Tetrahedral geometry around copper is assigned in all complexes using EPR and electronic spectral analyses. All complexes were investigated for their interaction with herring sperm DNA utilizing absorption titration (K_b = 1.27–3.13 × 10⁵ M^?1) and hydrodynamic volume measurement studies. The studies suggest the classical intercalative mode of DNA binding. The cleavage reaction on pUC19 DNA was monitored by agarose gel electrophoresis. The results indicate that the Cu(II) complexes can more effectively promote the cleavage of plasmid DNA. The superoxide dismutase mimic activity of the complexes was evaluated by nitroblue tetrazolium assay, and the complexes catalysed the dismutation of superoxide at pH = 7.8 with IC₅₀ values in the range 0.597–0.900 μM. The complexes were screened for their in vitro antibacterial activity against five pathogenic bacteria. All the complexes are good cytotoxic agents and show LC₅₀ values ranging from 5.559 to 11.912 µg ml^?1. All newly synthesized Cu(II) complexes were also evaluated for their in vitro antimalarial activity against Plasmodium falciparum strain (IC₅₀ = 0.62–2.0 µg ml^?1). Copyright © 2015 John Wiley & Sons, Ltd.     

贴片机脱机编程的快捷方法

SMT生产线中的大多数加工设备均为数控设备。它们编程所需要的大多数特征数据均可从CAD设计系统中得到。文章介绍了如何从CAD设计系统中导出X、Y坐标数据,并转换成贴片数据的方法和思路,以期引起更多的同行加入到这方面的研究中。     

SIMPLIS环境中开关电源集成电路控制器模型的开发及应用

介绍现代开关电源行业仿真工作的意义和现状,以及专用仿真软件包SIM etrix/SIMPLIS的优点和不足。通过实例给出SIMPLIS环境中集成电路控制芯片的建模过程,并就其中的关键技术予以简单讨论。     

“锲而不舍 金石可镂”——上海秀派公司2．45GHz有源RFID标签技术的成功之路

上海秀派公司坚持自己的技术长项——2．45GHz有源RFID,充分发扬该种RFID的特长,记者采访该公司时了解到了开发方面的很多细节、成功案例和实施经验。我们不但非常推崇该公司的“锲而不舍”的意志,而且还意识到如果秀派公司的成功经验一旦辐射到中国的RFID行业中,一定会把这项在国外诞生的技术更好地植根于中国的土壤,使之更加适合中国的实用环境。     

光刻版图形处理过程的计算机仿真

采用有限状态机模型来仿真集成电路行业中光刻版图形的处理过程,涵括了层次处理、涨缩处理和反转处理。将不同的处理过程定义为相应的状态,将图形处理要求定义为输入条件触发状态转换。该模型已应用于光刻版数据处理的电子设计自动化软件。     

集成电路生产中废气的污染及治理

介绍集成电路生产中产生各种废气的种类,废气中有害物质浓度及其危害性,并依据工程实践,评述了各类有害废气的各种处理方法。     

AlGaAs／GaAs HBT集成电路的CAD

介绍了一套用于ＡｌＧａＡｓ／ＧａＡｓＨＢＴ集成电路的ＣＡＤ软件，它可完成ＨＢＴ的器件模拟、模型参数提取及电路模拟。应用该软件对ＨＢＴ运算放大器进行了模拟，为电路的研制提供了依据。     

半导体芯片厂有害气体检测器使用经验之探讨

本文除概略介绍气体检测器的种类处，主要对气体检测器的原理和在实际使用中的局限性作一基本归纳叙述。限于篇幅，本文将论述的重点放在气体检测器的选用与设置规划上，提出个人的一点心得与看法，以作为未来设置气体检测器系统时之参考。     

一种900-MHz 20-mW CMOS功率放大器的设计

提出了一个工作电压为3V，工作频率900MHZ，输出功率为20mW的高效率CMOS功率放大器。为了达到设计目标，文章采用了一些特殊的方法，包括三级放大结构，级间的调谐匹配和层叠差分结构。