原位漫反射红外光谱表征钛硅分子筛TS-1催化苯乙烯氧化反应

采用高温漫反射红外光谱考察了钛硅分子筛TS-1的稳定性,发现960 cm-1吸收峰在673 K时没有变化,表明所表征的骨架钛具有一定的高温稳定性,而表征分子筛骨架振动的两个吸收峰在673 K下向低波数位移了约13 cm-1。探讨了H₂O₂吸附对TS-1分子筛骨架钛的影响,发现960 cm-1处的吸收峰在吸附H₂O₂后强度减弱,并且向高波数位移了11 cm-1;抽真空或加热,吸收峰又复原,表明骨架钛可能存在TiO结构,H₂O₂与分子筛中的TiO作用,使相应的960 cm-1吸收峰向高波数位移。原位漫反射红外光谱考察了TS-1催化苯乙烯氧化反应,谱图分析表明,苯甲醛是主要产物,TS-1催化氧化的关键是H₂O₂吸附在TS-1的骨架钛上形成活性中心。     

The location of excess electrons on H2O/TiO2(110) surface and its role in the surface reactions

Excess electrons play a key role in many of the properties of Titanium dioxide (TiO₂). Understanding their behaviour is important for improving the performance of TiO₂ in energy-related applications. Here, we describe a DFT + U study of the locations of the unpaired electron (UPE) on rutile TiO₂(110) (R-TiO₂(110)) surface and H₂O/R-TiO₂(110) surface. Our results show that the subsurface are preferred with R-TiO₂(110) surface. In contrast to previous studies, we find that the UPE tends to migrate to the surface H₂O-Ti_5c (the five-coordinated titanium (Ti_5c) at surface with H₂O adsorption) with the increasing of H₂O coverage and UPE concentration. In addition, we have shown that the UPE plays an important role in the O-H bond dissociation and other important elementary reactions in photo-catalytic H₂O dissociation on R-TiO₂(110) such as H, OH and H₂ desorption. Specifically, it enhances the O-H bond dissociation, as well as H and H₂ desorption from bridging hydroxyl and Ti_5c-OH (the Ti_5c with OH adsorption), but hinders the OH and H desorption from Ti_5c. We believe our results afford a further understanding of the adsorbent dependent UPE migration, and the role of UPE in the surface reactions.     

以间质隔离法研究CH3O分子在p-H2间质中的红外吸收光谱

本研究利用低温间质隔离技术搭配红外光谱仪研究CH3ONO在p-H2间质中的光解产生CH3O。实验观察到位于689.3/694.6cm-1、945.9/951.7cm-1、1041.8cm-1、1224.7cm-1、1235.5cm-1、1347.7cm-1、1365.4cm-1、1427.5cm-1、1519.5cm-1、1522.3cm-1等处的CH3O红外吸收谱线,并分析得出各振动模式分别为电子态E1/2a1对称性的ν6、电子态E1/2a2对称性的ν6、电子态E3/2对称性的ν2、电子态E3/2e对称性的ν6、电子态E1/2e对称性的ν6、电子态E1/2a1对称性的ν5、电子态E3/2对称性的ν2、电子态E1/2对称性的ν2、电子态E3/2e对称性的ν5及电子态E1/2e对称性的ν5。     

Cross sections for (d–t) neutron interaction with germanium isotopes

The cross sections for (n,x)$(n,x)$ reactions with Ge isotopes were measured at (d–t) neutron energies around 14 MeV with the activation technique using metal discs of natural composition. Calculations of detector efficiency, incident neutron spectrum and correction factors were performed with the Monte Carlo technique (MCNP4C code). Cross sections data are presented for ⁷⁰Ge(n,2n$n,2n$)⁶⁹Ge, ⁷⁴Ge(n,α$n,\alpha$)^71mZn, ⁷⁶Ge(n,2n$n,2n$)^75(m + g)Ge, ⁷⁰Ge(n,p$n,p$)⁷⁰Ga and ⁷²Ge(n,2n$n,2n$)^71gGe reactions. The cross section results for ⁷²Ge(n,2n$n,2n$)^71gGe reaction were reported for the first time. Some other cross sections were obtained with higher precision, including the ⁷⁰Ge(n,p$n,p$)⁷⁰Ga reaction. Theoretical calculations of excitation functions were performed with the TALYS-1.0 code and compared with the experimental cross section values. Data were included in the EXFOR database.     

A density functional theory study on the adsorption and dissociation of N2O on Cu2O(1 1 1) surface

Density functional theory has been employed to investigate the adsorption and the dissociation of an N₂O at different sites on perfect and defective Cu₂O(1 1 1) surfaces. The calculations are performed on periodic systems using slab model. The Lewis acid site, Cu_CUS, and Lewis base site, O_SUF are considered for adsorption. Adsorption energies and the energies of the dissociation reaction N₂O → N₂ + O(s) at different sites are calculated. The calculations show that adsorption of N₂O is more favorable on Cu_CUS adsorption site energetically. Cu_CUS site exhibits a very high activity. The Cu_CUS-N₂O reaction is exothermic with a reaction energy of 77.45 kJ mol⁻¹ and an activation energy of 88.82 kJ mol⁻¹, whereas the O_SUF-N₂O reaction is endothermic with a reaction energy of 205.21 kJ mol⁻¹ and an activation energy of 256.19 kJ mol⁻¹. The calculations for defective surface indicate that O vacancy cannot obviously improve the catalytic activity of Cu₂O.     

CO在尖晶石结构CuCr2O4(111)表面上的吸附理论研究

采用密度泛函理论，研究了CO在具有尖晶石结构的过渡金属氧化物CuCr2O4(100)表面上的吸附. 几何构型优化结果表明，CO倾向于以碳端吸附在Cu原子上，吸附能达到133.2 kJ/mol. 吸附在五配位的Cr原子上也比较稳定，吸附能为57.5 kJ/mol. 吸附后，C-O键伸长，振动频率出现红移，表明分子被活化. 同时分析了吸附前后态密度的变化，探讨了CO与底物的成键机理.     

Classification of Dansgaard–Oeschger climatic cycles by the application of similitude signal processing

In this work we have performed a detailed analysis, using signal processing tools, to study time series of data (temperature proxy) extracted from the GRIP ice-core records and we relate it with the evolution of atmospheric CO₂ within the last glacial period. Our method is based in considering the warm periods known as Dansgaard–Oeschger (D/O) events and posterior returns to the cold stage as a climatic cycle. After the warming phase, D/O events relax to the initial cold state in three different ways, what gives rise to three classes of cycles. Also, the Younger/Dryas–Bolling/Allerod (Y/D–B/A) cycle corresponds to one of the classes obtained. We have found that all cycles start with identical warming phases which seem completely unrelated to variations in CO₂ concentration. We discuss on the consequences for global climatology of such steady pattern of cycles.     

CaAl_2Si_2O_8∶Eu,Ce,Tb单基三元掺杂荧光材料的制备及其光谱学特征研究

采用高温固相法制备了CaAl_2Si_2O_8∶Eu,Ce,Tb单基三元掺杂的荧光材料。使用X射线衍射仪(XRD)、拉曼光谱仪(Raman)和荧光分光光度计(PL)等测试手段对该荧光材料进行表征。采用XRD表征了样品的物相组成,测试结果表明稀土离子Eu~(2+)置换Ca~(2+)并没有引起CaAl_2Si_2O_8基质晶格结构的变化。拉曼光谱分析证实了样品中硅氧四面体和铝氧四面体的存在,表明了Eu~(2+)替代Ca~(2+)的数量与晶体形态畸变程度有关,Eu~(2+)进入基质晶格的数量影响着硅(铝)氧四面体的数量。PL测试结果表明样品在325nm光激发下,其发射峰主要表现为426nm(蓝光区)的强宽带发射峰和541nm(绿光区)的弱发射峰,其中426nm处的宽带发射峰可通过高斯拟合成三个位于393,419和474nm的拟合峰;对比分析荧光性能以及同等合成条件下样品荧光强度的不同,确定了该荧光材料在三掺Eu∶Ce∶Tb的摩尔比为1∶1∶1.5时所发射荧光最强。CIE色度图坐标显示三种掺杂比例下制备的荧光材料均发射蓝色荧光,光显色性好,色温低,是一种适合作为紫外-近紫外激发的LED用蓝色荧光材料。     

水分子在Yn (n=2-8)团簇表面的分子吸附与解离吸附

运用密度泛函理论,对H2O在Yn (n=2-8) 团簇表面的分子吸附与解离吸附两种模式进行了结构优化,电子性质分析。结果表明：分子吸附中H2O倾向于O端吸附于Y-Y原子桥位,而解离吸附中H2O解离的H, O原子倾向于吸附于Yn团簇的面位。两种吸附模式都导致了（解离吸附n=4, 5除外）主团簇Y原子平均键长增大。分子吸附和解离吸附的吸附强度和化学活性都随尺寸增加而增大。解离吸附中体系的稳定性明显高于分子吸附,且与体系的电子壳层效应密切相关。     

顺式羰基铑碘络合物催化甲醇制乙酸反应的动力学研究

本文运用密度泛函理论DFT-B3LYP方法,对铑、碘元素采用相对论校正赝势基组SDD,对C、O、H采用6-311+G(2d,p)基组,计算研究了顺式羰基铑碘络合物催化甲醇羰基化制乙酸反应的微观机理,优化了各反应物、中间体和过渡态的构型特征,用频率分析方法和内禀反应坐标方法对过渡态进行了验证,运用Kozuch撰写的能量跨度模型获得循环反应的动力学信息,确定了决定循环反应速率的决速过渡态和决速中间体,并利用转化频率评估了催化性能与温度的变化关系.