面心立方晶体外延膜沉积生长中失配位错的结构与形成过程

用分子动力学方法对5%负失配条件下面心立方晶体铝薄膜的原子沉积外延生长进行了三维模拟.铝原子间的相互作用采用嵌入原子法(EAM)多体势计算.模拟结果再现了失配位错的形成现象.分析表明，失配位错在形成之初即呈现为Shockley扩展位错，即由两个伯格斯矢量为〈211〉/6的部分位错和其间的堆垛层错组成，两个部分位错的间距、即层错宽度为1.8 nm,与理论计算结果一致；外延晶体薄膜沉积生长中，位错对会发生滑移，但其间距保持稳定.进一步观察发现，该扩展位错产生于一种类似于“局部熔融-重结晶”的表层局部无序紊乱- 关键词： 失配位错 外延生长 薄膜 分子动力学 铝     

两类方程亚纯解(n,1)级的上界估计

本文给出Riccati方程及另外一类具有代表性微分方程的亚纯解（n,1)级的上界估计，在一定条件下确立了文[2]中的猜测的正确性。     

生长温度对碳纳米管阴极场发射性能的影响

碳纳米管(Carbon Nanotubes,CNTs)场发射平面显示器(Field Emission Display,FED)与其他显示器比较显示了其独特优点,被认为是未来理想的平面显示器之一。碳纳米管阴极作为器件的核心部分,其性能的好坏直接影响显示器的性能。针对30~60英寸(76.2~152.4cm)大屏幕显示器所用的厚膜工艺,即采用丝网印刷法制备了碳纳米管阴极阵列,研究了化学气相沉积法在不同温度下生长的CNTs的场发射电流-电压特性,找到了适合FED用碳纳米管的最佳生长温度。结果表明生长温度越高(750℃),CNTs场发射性能越好。并用荧光粉阳极测试这些CNTs的场发射发光显示效果,验证了上述结论。     

Two-dimensional Anhydrous Cadmium(II) Phthalate

The in situ hydrolysis of phthalyl-γ-glutaminyl-histidine with Cd(ClO₄)₂·6H₂O in the presence of water and methanol affords a novel two-dimensional cadmium coordination polymer, a new phase, anhydrous cadmium(II) phthalate, ( 1 ). The structure was determined by single crystal X-ray diffraction. Crystal data: P2₁/c, a = 13.8168(14), b = 7.0351(7), c = 8.2054(8) Å, β = 105.540(2)°, V = 768.43(13) ų, Z = 4, R₁ = 0.0380, wR₂ = 0.1111.     

Comparison of two models for managing reliability growth during product design

Relying on reliability growth testing to improve system designis neither usually effective nor efficient. Instead it is importantto design in reliability. This requires models to estimate reliabilitygrowth in the design that can be used to assess whether goalreliability will be achieved within the target timescale forthe design process. Many models have been developed for analysisof reliability growth on test, but there has been much lessattention given to reliability growth in design. This paperdescribes and compares two models: one motivated by the practicalengineering process; the other by extending the reasoning ofstatistical reliability growth modelling. Both models are referencedin the recently revised edition of international standard IEC61164. However, there has been no reported evaluation of theirproperties. Therefore, this paper explores the commonalitiesand differences between these models through an assessment oftheir logic and their application to an industrial example.Recommendations are given for the use of reliability growthmodels to aid management of the design process and to informproduct development.     

Effect of induced shielding current transmission in longitudinal direction on levitation force of melt grown single-domain YBa_2Cu_3O_(7-x) cylindrical superconductor

YBa2Cu3O7-x (YBCO) bulk is one of the most important high temperature superconducting materials for magnetic levitation applications, because it has a high magnetic irreversibility field Hirr at liquid nitrogen temperature, and can grow into large grains. The levitation force of YBCO bulk is proportional to the critical current density (Jc) and grain radius (r)[1], so higher Jc and r are appreciated for YBCO bulks to achieve higher levitation force. Now single-domain YBCO bulks up to s…     

电子束驱动的回旋激射不稳定性

对弱相对论性电子束驱动的回旋激射(maser)不稳定性的一般理论作了详细讨论.对在获得增长率实用表达式过程中若干解析表达式的推导与细节做了仔细的补充讨论和说明，还增加了增长率的近似表达式，并由此得到了回旋激射不稳定性主要特征的解析分析以及与精确计算的比较，使整个理论有一个完整的描述.侧重解析讨论，也提供了部分一般性的数值计算结果. 关键词： 回旋激射不稳定性 弱相对论性电子束 增长率     

Rhythmic growth of ring‐banded spherulites in blends of liquid crystalline methoxy‐poly(aryl ether ketone) and poly(aryl ether ether ketone)

Rhythmic growth of ring‐banded spherulites in blends of liquid crystalline methoxy‐poly(aryl ether ketone) (M‐PAEK) and poly(aryl ether ether ketone) (PEEK) has been investigated by means of differential scanning calorimetry (DSC), polarized light microscopy (PLM), and scanning electron microscopy (SEM) techniques. The measurements reveal that the formation of the rhythmically grown ring‐banded spherulites in the M‐PAEK/PEEK blends is strongly dependent on the blend composition. In the M‐PAEK‐rich blends, upon cooling, an unusual ring‐banded spherulite is formed, which is ascribed to structural discontinuity caused by a rhythmic radial growth. For the 50:50 M‐PAEK/PEEK blend, ring‐banded spherulites and individual PEEK spherulites coexist in the system. In the blends with PEEK as the predominant component, M‐PAEK is rejected into the boundary of PEEK spherulites. The cooling rate and crystallization temperature have great effect on the phase behavior, especially the ring‐banded spherulite formation in the blends. In addition, the effects of M‐PAEK phase transition rate and phase separation rate on banded spherulite formation is discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3011–3024, 2007     

Detecting instabilities in flows of viscoelastic fluids

There is a growing interest in developing numerical tools to investigate the onset of physical instabilities observed in experiments involving viscoelastic flows, which is a difficult and challenging task as the simulations are very sensitive to numerical instabilities. Following a recent linear stability analysis carried out in order to better understand qualitatively the origin of numerical instabilities occurring in the simulation of flows viscoelastic fluids, the present paper considers a possible extension for more complex flows. This promising method could be applied to track instabilities in complex (i.e. essentially non‐parallel) flows. In addition, results related to transient growth mechanism indicate that it might be responsible for the development of numerical instabilities in the simulation of viscoelastic fluids. Copyright © 2003 John Wiley & Sons, Ltd.