Nonlinear Current-Voltage Curves for Thin-Film Gas-Sensitive Structures

Current-voltage curves for sensor structures based on thin tin oxide films are examined in various gases. Conditions favoring symmetrical nonlinear curves in the voltage range −30 to 30 V are found.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 735–737.Original Russian Text Copyright © 2005 by Simakov.Published on the basis of a report delivered at the VII Meeting on Fundamental Problems in Solid-State Ionics (Chernogolovka-2004).     

Polymeric pH indicators immobilized PVA membranes for optical sensors of high basicity based on a kinetic process

Two kinds of polymeric pH indicators PPF (phenolphthalein-formaldehyde product) and CPF (o-cresolphthalein-formaldehyde product) immobilized cross-linked poly(vinyl alcohol) membranes (PPF-PVA and CPF-PVA) for optical intermittent determination of high basicity ([OH⁻] = 1-8 M) based on a kinetic process were developed. In our previous work, we had demonstrated that PPF-PVA and CPF-PVA could perform the determination of high pH values from pH 10.0 to 14.0. Here the discoloring kinetic behaviors of PPF-PVA and CPF-PVA were compared with those of free phenolphthalein, o-cresolphthalein and thymolphthalein. Experimental results and theoretical analysis indicated that the response behaviors of the optodes’ membranes in concentrated NaOH solutions were diffusion-independent and still complied with the pseudo-first-order kinetics. In addition, two data analysis methods for determination were presented. One was directly based on the reduced absorbance; the other was based on the discoloring kinetic constant. It was found that the latter could perform a rapid (60 s) and reliable (relative standard deviation: 2.6%) determination for high basicity. These kinds of optodes can be used repeatedly when they are immersed in low-pH solutions to regain the protonated form after each determination.     

微生物传感器—高效液相色谱联用研究

本文用自制的单一或复合的微生物传感器作检测器,与高效液相色谱结合,对7种氮基酸,5种有机醇,以及同化糖与醇,维生素等7种混合体系进行分离硷测,取得较好的结果。     

Optical oxygen sensor based on fluorescence change of pyrene-1-butyric acid chemisorption film on an anodic oxidation aluminium plate

An optical oxygen-sensing material based on the fluorescence intensity changes of pyrene-1-butyric acid (PBA) chemisorption film has been developed and characterised. The fluorescence intensity of PBA film decreased with increase of oxygen concentration. The I₀/I₁₀₀ value of PBA film is estimated to be 6.14±0.15 and large Stern-Volmer constant (K_SV=0.028±0.13 Torr⁻¹) is obtained. After irradiation for 24 h with 150 W tungsten lamp, little changes of oxygen-sensing properties were observed. These results indicate that PBA film is highly oxygen-sensitive and photostability device. The response times of the PBA chemisorption film were 10.0 s for switching from argon to oxygen, and 53.0 s for switching from oxygen to argon. Moreover, the optical sensor based on the PBA chemisorption film was applied to the measurement of oxygen concentration in aqueous solution.     

Electroanalytical Study of Prussian Blue Modified Glassy Carbon Paste Electrodes

Two types of glassy carbon (GC) powder (i.e., Sigradur K and Sigradur G) have been mixed with mineral oil to obtain glassy carbon paste electrodes (GCPE's). The electrochemical behavior of such electrodes at different percentages of glassy carbon has been evaluated with respect to the electrochemistry of ferricyanide as revealed with cyclic voltammetry and the best paste composition was chosen. GC was then modified with Prussian Blue (PB), mixed at different percentages with unmodified GC and with a fixed amount of mineral oil in order to obtain PB modified glassy carbon paste electrodes (PB‐GCPE's). PB‐GCPE's with different percentages of GC modified with PB (PB‐GC) were compared and the dependence on the amount of PB on their performances was evaluated by studying the parameters of cyclic voltammetry (i.e., current peak, ΔE_p, anodic and cathodic current ratio, charge density) and the amperometric response to H₂O₂. Data interpretation based on the GC surface area is presented. GCPE's with a selected amount of PB‐GC were then tested as H₂O₂ probes and all the analytical parameters together with the dependence on pH were evaluated. Some preliminary experiments with these electrodes assembled as glucose, lysine and lactate biosensors are also reported.     

Citrate selectivity of poly(neutral red) electropolymerized films

The synthesis and the spectroscopic and potentiometric characterization of electropolymerized films obtained from neutral red (NR) on Pt surface are described. FT Raman and NMR spectroscopy were used for evaluation of the resulting poly(NR) layers. Then potentiometry was applied to study the characteristics of the complexation of carboxylates with the poly(NR) films. A potentiometric poly(NR) sensor showing high selectivity for citrate anion was employed for its determination in soft drinks.     

磺胺甲恶唑在二硫化钼纳米片修饰电极上的电化学行为

采用了研磨后超声和离心分离方法制备了二硫化钼纳米片,通过原子力显微镜(AFM)和扫描电子显微镜(SEM)对不同离心速度分离的二硫化钼纳米片进行了表征。使用循环伏安法(CV)和差分脉冲伏安法(DPV)在磺胺甲恶唑溶液中对二硫化钼纳米片修饰的玻碳电极进行了电化学行为研究。结果显示,磺胺甲恶唑在二硫化钼修饰电极的循环伏安图上有一对氧化还原峰。其峰电流值与扫描速度的平方根成正比,是扩散控制过程。DPV扫描结果显示,磺胺甲恶唑的峰电流与其浓度之间存在着明显的线性关系。研磨超声方法制备出的二硫化钼纳米片层材料在电极上能够加速电子的转移和传输,从而有效提高峰电流值,为进一步研制准确测定磺胺甲恶唑电化学传感器提供了一种可选择的材料和电化学分析方法。     

An anionic chromogenic sensor based on protonated Reichardt’s pyridiniophenolate

An anionic sensor based on Reichardt’s betaine is described here. The dye is blue-green in chloroform but becomes colorless under protonation. Increasing amounts of different anions were added into the solution of the protonated dye. The addition of F⁻ and caused the reappearance of the original blue-green color, while the addition of I⁻ made the solution of the protonated dye yellow. The observations are discussed based on the fact that F⁻ and can act as bases accepting a proton from the protonated dye and also in relation to the formation of a complex between the protonated dye and iodide.     

Copper(II) ion sensor based on electropolymerized undoped conducting polymers

A solid state copper(II) ion sensor is reported based on the application of electropolymerized undoped (neutral) polycarbazole (PCz) and polyindole (PIn) modified electrodes. The new sensor shows high selectivity to Cu²⁺ ions with a detection limit of 10^–5 M. PCz and PIn are formed respectively by the anodic oxidation of 50 mM carbazole and 5 mM indole monomers in dichloromethane containing 0.1 M tetrabutylammonium perchlorate on a platinum electrode using a single compartment cell. Potentiostatic polymerization of both the monomers are carried out at 1.3 V and 1.0 V vs. Ag/AgCl, respectively. Perchlorate ions were electrochemically removed from the polymer films by applying – 0.2 V vs. Ag/AgCl. Polymer-coated electrodes are incubated in 1 M KCl solution for 8 h followed by incubation in distilled water for 2 h before using as a metal ion sensor. The undoped PCz and PIn electrodes were found to be highly selective and sensitive for Cu²⁺ ions with little selectivity for Pb²⁺ and negligible response towards Ag⁺, Hg²⁺, Cu⁺, Ni²⁺, Co²⁺, Fe²⁺, Fe³⁺ or Zn²⁺. Potentiometric responses for Cu²⁺ ions are recorded for both the sensor electrodes together with a double-junction Ag/AgCl reference electrode. Calibration curves for Cu²⁺ are reported for both ion sensors. The polymer-modified electrodes were found to be stable for several weeks. Electronic Publication