Analysis of dimensionally stable copolyimide with a low‐level residual stress

Copolyimide thin film, which has low‐level stress and stress relaxation induced by water sorption, was characterized for potential applications as an encapsulant, a stress‐relief buffer, and in interlayer dielectrics. The polyimides examined were poly(p‐phenylene pyromellitimide) (PMDA‐PDA) and poly(p‐phenylene biphenyltetracarboximide) (BPDA‐PDA) as well as their random copolyimides with various compositions. These copolyimide films exhibited good combinations of physical and mechanical properties with low thermal expansion coefficients, residual stress, and moisture‐induced stress–relaxation behavior by appropriately selecting the ratios of the dianhydride component. For these polyimides, the residual stress increased in the range of −8.1–7.5 MPa, whereas stress relaxation induced by water uptake decreased in the range of 10.3–4.7 MPa with increasing BPDA contents, respectively. The major factor in determining the magnitude of the stress behavior induced by both the thermal mismatch and water uptake in films should be the morphological factors such as chain rigidity, chain orientation, crystallinity, and microvoids. Their morphological structures were examined by wide angle X‐ray diffraction and a prism coupler, and the thermal properties were measured using a dynamic mechanical thermal analyzer as well as thermomechanical analysis. Overall, the candidate for the low level stress buffer application from the PMDA/BPDA‐PDA copolyimide was the 30/70 (= PMDA/BPDA in molar ratio) copolyimide. This copolyimide showed no residual stress after curing at 400 °C and relatively insensitive stress relaxation to ambient humidity. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 796–810, 2001     

The study of the lipophilicity of alpha-(4-phenylpiperazin-1-yl)-gamma-phthalimidobutyramides using chromatographic and computational methods

The lipophilicity of the series of alpha-(4-phenylpiperazin-1-yl)-gamma-phthalimido-butyramides (1-8) has been investigated. Several methods, like reversed-phase thin-layer chromatography and high-performance liquid chromatography using reversed-phase RP18 and IAM.DD2 columns, were applied to determine RMO, log k0 and log k(0IAM) factors. The RP-TLC investigations were performed in mixtures of acetone-water and acetonitrile-water. For RP-HPLC method mixtures of acetonitrile, water and 0.01% TFA were used as the mobile phases while for IAM.DD2 investigations mixtures of acetonitrile and water were applied. The partition coefficients of compounds (1-8) were also calculated with the Pallas and CAChe programs. All the obtained data, both from experimental methods and computational calculations, were compared and a suitable conclusion was reached.     

不同部位人体气味的分析研究

运用SPME-GC/MS法对同一个体腋窝部、手部和足部的人体气味样品进行了采样分析,通过比较3个部位人体气味样品色谱图中共有成分相对峰面积比和非共有成分,结合使用相似度法对3个部位的人体气味进行了比较分析,三者具有较高的相似度,但仍存在一些细微的差别。     

Simultaneous determination of rosiglitazone and metformin in plasma by gradient liquid chromatography with UV detection

A novel, fast and simple liquid chromatographic method was developed and validated for the simultaneous determination of rosiglitazone and metformin in human plasma. The analysis was performed on a phenyl column (250 mm × 4.6 mm i.d., 5 μm) using a gradient method starting with mobile phase composed of acetonitrile:5 mM acetate buffer pH 5.5 (75:25, v/v). The flow rate was 1 mL min⁻¹. UV detection was performed at 245 nm and verapamil was used as internal standard. The total run time was less than 10 min. Sample preparation included a simple protein precipitation step with acetonitrile. Validation experiments were performed to demonstrate stability, specificity, sensitivity, linearity, accuracy, precision and robustness. The limit of quantification was 100 ng mL⁻¹ for rosiglitazone and 250 ng mL⁻¹ for metformin. The extraction recoveries were 100.02-105.0% for rosiglitazone and 105.64-103.88% for metformin. The method was applied with success to plasma samples obtained from diabetic patients undergoing treatment with rosiglitazone and metformin.     

Quantitation of Purines and Pyrimidines in Human Serum by High-Performance Liquid Chromatography

Abstract

A high-performance liquid chromatography assay was developed for the purpose of examining xanthine, hypoxanthine, uridine, thymidine, allopurinol, and oxypurinol in serum of patients with advanced carcinoma treated with methorexate and 5-fluorouracil. After the addition of an internal standard, serum samples were extracted of purines and pyrimidines with trichloroacetic acid and neutralized with tert-amine. Aliquots of the extracted serum were injected onto a C18 reverse-phase column and purines and pyrimidines were eluted with a gradient of MeOH/H₂O and KH₂PO₄ solutions. Absorbance was detected with a variable-wavelength UV spectrophotometer at 254 nm and 280 nm. This assay can be readily applied to quantitate baseline and treatment-induced variations in serum purine and pyrimidine levels which may correlate with clinical response and/or toxicity in patients with cancer.     

Evaluation of a sensitive HPLC method for the determination of Malondialdehyde, and application of the method to different biological materials

Summary Reactive oxygen species (ROS), important mediators of cell and tissue injury during inflammation, are produced by several types of inflammatory cells. The formation of ROS can be monitored by detection of lipid peroxidation products. The extremely broad spectrum of biological effects of aldehydic lipid peroxidation products has necessitated the development of a technique that enables the sensitive routine quantitation of aldehydes formed in biological materials. Malondialdehyde (MDA) is a by-product of enzymatic eicosanoid formation and an end-product of nonenzymatic peroxidation of polyunsaturated fatty acids with three or more bisallylic double bonds. The determination of the thiobarbituric acid derivative of MDA (TBA-MDA) is a widely used method for estimating overall lipid peroxidation. We describe a rapid, isocratic, simple, and sensitive high-performance liquid chromatographic (HPLC) method with spectrofluorimetric detection for measurement of MDA-TBA in human biological samples such as plasma, urine, wound secretions, amniotic fluid, sputum and tissue samples. By use of this method, picomole quantities of MDA can be readily and specifically detected in different biological materials. Coefficients of variation of repeated MDA-TBA assays were 4.4% within run and 6.9% from run to run. Reference values are given for a variety of human body fluids and for rat tissues.     

Solid-phase microextraction coupled with microcolumn liquid chromatography for the analysis of amitriptyline in human urine

Summary Solid-phase microextraction (SPME) is a solvent-free sample-preparation technique that enables isolation and pre-concentration of analytes from a sample on a thin film coating a fused-silica fiber. In this study SPME coupled with microcolumn liquid chromatography (micro LC) has been used for the determination of four tricyclic antidepressants (amitriptyline, imipramine, nortriptyline, and desipramine) in human urine. SPME conditions which affect extraction efficiency were optimized, and under the optimum conditions the system was a few hundred times more sensitive than direct LC analysis without SPME. For amitriptyline the detection limit was 3 ng mL⁻¹ and the calibration curve was linear in the range of 5–500 ng mL⁻¹. The SPME-micro LC method has been applied to the analysis of amitriptyline in patient’s urine.     

Environmental exposure to metals of newborns, infants and young children

Anthropogenic emissions, such as those from combustion of fossil fuel, waste incineration and industrial use, contribute to higher levels of metal pollutants, including Cd, Pb and Sb, in the urban environment. These widespread and persistent environmental pollutants have the potential for developmental and reproductive toxicity. Health risks are particularly associated with exposure in utero and the early years of life, since the developing organism is at greater risk from permanent damage, and both absorption and retention can be considerably greater in infants than adults. In order to assess risk to humans, the information on environmental levels of pollutants (environmental monitoring) should be integrated with information on biomarkers of exposure, effect or susceptibility in biological fluids or tissues (biological monitoring). The analysis of tissue from the target organ obtained at autopsy provides a direct record of the accumulation of toxins and allows temporal and geographical trends to be studied. Few literature reports on tissue content of potentially toxic elements include data on newborns and young children since collections of autopsy samples in this age range are rare. Existing data are sometime questionable, because of inadequate sensitivity of the analytical techniques, insufficient control of contamination and lack of validation. Our recent work aimed to establish reliable reference values for the content of Cd, Pb and Sb in the liver of pediatric subjects.     

CRACK PROPAGATING IN FUNCTIONALLY GRADED COATING WITH ARBITRARILY DISTRIBUTED MATERIAL PROPERTIES BONDED TO HOMOGENEOUS SUBSTRATE

In this paper, a finite crack with constant length （Yoffe type crack） propagating in a functionally graded coating with spatially varying elastic properties bonded to a homogeneous substrate of finite thickness under anti-plane loading was studied. A multi-layered model is employed to model arbitrary variations of material properties based on two linearly-distributed material compliance parameters. The mixed boundary problem is reduced to a system of singular integral equations that are solved numerically. Some numerical examples are given to demonstrate the accuracy, efficiency and versatility of the model. The numerical results show that the graded parameters, the thicknesses of the interfacial layer and the two homogeneous layers, the crack size and speed have significant effects on the dynamic fracture behavior.     

Multiple QSAR and molecular modelling for identification of potent human adenovirus inhibitors

This study has investigated docking-based 2D- and 3D-quantitative structure-activity relationships (QSARs) for a range of 53 hydroxybenzamide analogues as anti- Human adenoviruses (HAdVs). The best 3D-QSAR (Schrodinger, LLC, NY, 2020) and 2D-QSAR models were obtained for the training set and were found to be statistically significant, with cross-validated coefficients (q²) of 0.6775 and 0.7875, and coefficients of determination (r²) of 0.8106 and 0.8122, respectively. Our in-silico docking and virtual screening studies revealed significant higher binding affinity of dataset molecule 34 (-141.444 ​kcal/mol) and hit ZINC01088642 (-114.357 ​kcal/mol) with 4PIE protein than the standard drugs. In in-silico ADME/toxicity studies, molecule 34 and proposed hit ZINC01088642 were found safe with good intestinal absorption, aqueous solubility, medium blood–brain barrier (BBB), no eye corrosion, no skin irritancy, and non-mutagenic profiles. Molecular dynamics analysis showed good stability of complex, hit ZINC01088642 with protein, 4PIE over the simulation period of 20 ns. We believe that further experimental, as well as in-vitro investigation, will shed more lights on the identification of ZINC01088642 as a potential human adenovirus agent.