Ce_2Mo_3O_(12)超微粒子的制备及催化性能

以硝酸铈和钼酸铵为原料 ,采用溶胶 -凝胶法和微波加热技术制备了Ce2 Mo3 O12 超微粒子催化剂 ,使用DTA -TG ,IR ,XRD以及BET比表面测试等表征手段 ,考察了制备条件对复合氧化物超微粒子形成 ,晶相和比表面积的影响 .同时 ,测试了该样品对甲苯选择性氧化制苯甲醛反应的催化性能 .结果表明 :制备Ce2 Mo3 O12 超微粒子的适宜条件为 :初始溶液pH =1.0 ,柠檬酸 / (铈 +钼 )摩尔比等于 0 .4 ,在此条件下制得的干凝胶 ,经微波加热处理后 ,粒子的比表面积为 35 .8m2 /g ,粒径约为 4 0nm .在由甲苯气相选择氧化制苯甲醛的反应中表现出较好的催化活性     

溶胶-凝胶法制备Fe2(MoO4)3超微粒子催化剂

以硝酸铁和钼酸铵为原料，采用溶胶－凝胶法和微波加热技术制备了F 2(MoO4)3超微子催化剂，使用DTA－TG，IR，XRD以及BET比表面测试等手段，考察了制备条件对复合氧化物超微粒子形成、晶相和比表面积的影响。同时测试了该样品对甲苯选择性氧化制苯甲醛的催化性能。结果表明：制备Fe2(MoO4)2超微粒子的适宜条件为：初始溶液pH=1.0,mol柠檬酸：mol(铁＋钼）＝0．4。在此条件下制得的干凝胶，经微波加热处理后粒子的比表面积为36.4m^2/g，粒径约为35nm。在由甲苯气相选择氧化制苯甲醛的反应中表现出较高的催化活性。     

MesoDyn Simulation Study on Phase Diagram of Aerosol OT/isooctane/water System

There is a growing interest in the study of surfactant self-assemble in oil/water/surfactant system because of their applications not only in traditional colloid chemistry but in analytical, synthetic, and medicinal chemistry as well1,2. In these systems, one of the most commonly studied surfactants which can form reverse micelles is sodium bis(2-ethylhexyl) sulfosuccinate, i.e. Aerosol OT (AOT)3. The properties of the AOT reverse micelles have been discussed by some experimental methods4…     

Strategy for Applying Microanalytical Techniques

A combination of microanalysis techniques is used to reveal with great precision the composition and microstructure of typical features in engineering materials. In this paper small particles, very thin films, interfaces and their contiguous region are considered. Small silicon nitride particles in an iron matrix produced by nitriding are characterized quantitatively with High Resolution Electron Microscopy (HREM) and Electron Probe Micro Analysis (EPMA) using Wavelength Dispersive X-ray Spectrometry (WDS). Thin aluminium-oxide films grown on aluminium substrates by thermal oxidation at low pressure are investigated with HREM and X-ray Photoelectron Spectroscopy (XPS). Their thickness, composition and degree of crystallinity are established as a function of oxidation temperature and time. At and near the oxide-layer/MCrAlY-coating (M=Ni and/or Co) interface the aluminium and chromium depletion behaviour of the coating material due to high-temperature oxidation is studied with high-resolution Scanning Electron Microscopy (SEM), EPMA and Auger electron spectroscopy (AES). The composition-depth profiles obtained for the coating material are used to determine the composition dependent diffusion coefficients. These properties are crucial for the prediction through computational modelling of the coating material oxidation behaviour and enable the development of new coating materials.     

α-Fe粉体浓悬浮体系的制备及磁流变效应

报道使用价格低廉的还原铁粉制备磁性粒子浓悬浮体系,对体系磁流变效应进行研究,并研究了磁性颗粒尺寸和氧化物对悬浮体系力学性质及沉降稳定性的影响.     

The morphology of isomorphous substituted hectorites

Small-angle scattering (SAS) is used to investigate geometric structure parameters of isomorphically substituted hectorites. The aluminum content, the layer charge, and the purity of the substituted hectorites are related to the Al supply. The structural information contained in the scattering curves I(h) about the morphology of the samples in four different range orders from 1 nm to 300 nm is analyzed using the theory of the chord length distribution. The geometric structure parameters obtained are compared with results from XRD (L ₀-parameter), N₂-adsorption (L ₁ and mesopore size) and photon-correlation spectroscopy (largest dimension L ₃ and characteristic dimension of the secondary particles). Accepted after revision: 13 November 2001 Electronic Publication     

核壳结构磁性镁铝复合氧化物亚微米粒子的制备与表征

首先采用溶剂热法制备粒径均匀分散性良好的Fe3O4亚微米粒子,在对其包覆上一层碳膜进行表面修饰后,采用共沉淀法将硝酸根插层LDHs包覆到磁性粒子的表面,然后500℃焙烧2 h得到磁性镁铝复合氧化物亚微米粒子。这种磁性镁铝复合氧化物亚微米粒子具有以镁铝复合氧化物为壳层,Fe3O4为核的核壳结构,其中壳层厚度为20 nm左右,对其进行二次包覆后壳层厚度可达到50 nm左右,并可以方便的通过重复包覆焙烧过程进行调节,从而实现磁性镁铝复合氧化物亚微米粒子的控制制备。同时,磁性镁铝复合氧化物亚微米粒子具有较强的磁性,其比饱和磁化强度为23.3 emu·g-1,对其进行二次包覆并焙烧后为20.1 emu·g-1。     

稀土掺杂的纳米TiO2分散性及光学性能研究

采用溶胶凝胶法在同一条件下制备REa+:Ti4+=0.02和0.10的稀土掺杂的纳米TiO2材料,其中REn+为Nd3+,Ce4+,La3+,Er3+四种稀土元素.通过TG-DTG,XRD,TEM,UV-Vis等测试方法对所制备的纳米TiO2进行焙烧温度、晶胞尺寸、晶粒形貌、谱学特性等方面的研究.研究表明,稀土掺杂的纳米TiO2径粒尺寸均在20 nm左右,少量稀土掺杂不但有利于TiO2颗粒的分散,而且有利于TiO2向金红石相转变.同时,由于表面修饰作用和晶场效应的影响,掺杂使纳米材料在可见光范围内有不同程度的"红移"现象,Ce4+掺杂的纳米TiO2在可见光的"红移"程度最强.稀土掺杂的纳米TiO2在农用膜和节能材料上可广泛运用.     

均匀共沉淀法制备钛酸钡-钡铁氧体核-壳结构粒子

用均匀共沉淀法制备了钛酸钡-钡铁氧体核-壳粒子, 研究了沉淀反应温度、尿素/金属离子摩尔比值(R)和BaTiO₃浓度对核-壳粒子形貌和结构的影响, 探讨了钛酸钡-钡铁氧体核-壳粒子在焙烧时的形成过程及其磁性能. 采用透射电子显微镜(TEM)、X射线衍射(XRD)分析仪对钛酸钡-钡铁氧体前驱物核-壳粒子及钛酸钡-钡铁氧体核-壳粒子的形貌和结构进行了表征, 采用振动样品磁强计(VSM)研究了钛酸钡-钡铁氧体核-壳粒子的磁性能. 结果表明: 当沉淀反应温度为100 °C, R为180, BaTiO₃浓度为2.5 g·L^-1时, 金属离子沉淀完全, 得到的钛酸钡-钡铁氧体前驱物核-壳粒子包覆层均匀、完整、光滑, 厚度约为10 nm. 过高的温度和R值都会导致大量独立颗粒杂质的生成; 随着BaTiO₃浓度的增大, 包覆层厚度有减小的趋势. 当焙烧温度为900 °C时, 壳层中开始形成BaFe₁₂O₁₉相, 其形成过程为晶态的α-Fe₂O₃和BaCO₃首先生成中间相BaFe₂O₄, 然后由BaFe₂O₄和α-Fe₂O₃反应得到最终的BaFe₁₂O₁₉. 当焙烧温度为1000 °C时, 壳层完全转化为BaFe₁₂O₁₉相. 随着焙烧温度从900 °C升高到1000 °C, 所得BaTiO₃-BaFe₁₂O₁₉核-壳粒子的饱和磁化强度从16.5 A·m²·kg^-1增加到39.5 A·m²·kg^-1, 矫顽力从340 kA·m^-1略微降低到316 kA·m^-1.     

Characterization of silicone oil emulsions stabilized by TiO2 suspensions pre-adsorbed SDS

To study the effects of pre-adsorbed emulsifier on Pickering emulsion stability, the preparation of silicone oil emulsions by TiO₂ suspensions pre-adsorbed sodium dodecyl sulfate (SDS) at the fixed TiO₂ concentration of 0.15 g was carried out below a fiftieth of critical micelle concentration (cmc) of SDS, where all added amounts of SDS are adsorbed on the TiO₂ particles. The stability of the Pickering emulsions incorporating TiO₂ suspensions pre-adsorbed SDS was investigated by measuring the volume fraction of emulsified silicone oil, adsorbed amounts of TiO₂ suspensions pre-adsorbed SDS, oil droplet size, and some rheological responses such as the stress-strain sweep curve and strain and frequency dependences of dynamic viscoelastic moduli. The silicone oil was almost emulsified by TiO₂ suspensions pre-adsorbed SDS above cmc/10³. Increasing in the adsorbed amount of SDS on the TiO₂ particles leads to an increase in the adsorbed amounts of TiO₂ suspensions pre-adsorbed SDS. Such silicone oil emulsions for the first time showed two yield stresses in the stress-strain sweep curve as well as the oscillatory stress-strain curve. The respective yield stresses also increase with an increase in the adsorbed amounts of TiO₂ suspensions pre-adsorbed SDS. From such characteristic rheological properties and a partial sedimentation of some TiO₂ particles remained in the dispersion medium, we proposed the formation of a three dimensional network of the flocculated TiO₂ particles pre-adsorbed SDS on the silicone oil droplets.