The analysis of C4–C11 hydrocarbons in naphtha and reformate with a new apolar fused silica column

This paper deals with the separation of alkanes, naphthenes, and aromatic compounds in naphtha and reformate, on a newly developed apolar high resolution GC column. The selectivity of this apolar phase has been compared with those of squalane, DB-1, and SE-30. A total of 95 hydrocarbons were reliably identified, mostly by GC-MS. Repeated measurements of Kováts retention indices are presented as evidence for the reproducible manufacture of fused silica columns coated with this phase.     

The characterization of the capability of a balance

A survey is given on important standardized definitions by which the capability of balances may be characterized. Some modifications are proposed with regard to the use of mass sensors for the continuous determination of mass variations. An important supplement is the relative resolution introduced by Jenemann. Optimum values are presented.I am indepted to H. R. Jenemann for his critical remarks.     

First lipase catalysed resolution of epoxy enol esters

We report the first enzyme-catalysed kinetic resolution of epoxy enol esters. The lipase-promoted hydrolysis of these compounds provided α-hydroxyketones or α-hydroxyaldehydes (arising from the spontaneous rearrangement of the epoxy enols) and the residual esters with moderate to good enantioselectivity (E up to 100).     

Total spontaneous resolution of chiral covalent networks from stereochemically labile metal complexes

Stereochemically labile copper and zinc complexes with the N,N'-dimethylethylenediamine ligand (dmeda) have been shown to be promising precursors for the total spontaneous resolution of chiral covalent networks. (N,N')-[Cu(NO3)2(dmeda)]infinity crystallises as a conglomerate and yields either enantiopure (R,R)-1 or enantiopure (S,S)-1. A mixed-valence copper(I/II) complex, [{Cu(II)Br2(dmeda)}3(Cu(I)Br)2]infinity (2), which crystallises as a pair of interpenetrating chiral (10,3)-a nets, is formed from CuBr, CuBr2 and dmeda. One net contains ligands with solely (R,R) configuration and exhibits helices with (P) configuration while the other has solely (S,S)-dmeda ligands and gives rise to a net in which the helices have (M) configuration. The whole crystalline arrangement is racemic, because the interpenetrating chiral nets are of opposite handedness. With zinc chloride (R,S)-[ZnCl(dmeda)2]2[ZnCl4] (3) is obtained, which is a network structure, although not chiral. Total spontaneous resolution of stereochemically labile metal complexes formed from achiral or racemic building blocks is suggested as a viable route for the preparation of covalent chiral networks. Once the absolute structure of the compound has been determined by X-ray crystallography, a quantitative determination of the enantiomeric excess of the bulk product can be undertaken by means of solid-state CD spectroscopy.     

HPLC of synthetic polymers characterization of polystyrenes by high performance precipitation liquid chromatography (HPPLC)

Summary The advantages and disadvantages of high performance precipitation liquid chromatography have been demonstrated for polystyrene homopolymers. Depending on the mobile phase composition at the dissolution point of the polymeric sample and surface properties of the stationary phase, elution is governed either by a solution process or by adsorption. A contribution by adsorption was noticed on silica as well as on reversed phases based on silica with a normal phase gradient of increasing polarity (heptane to dichloromethane). Elution was solely governed by solubility of the polymers on both types of stationary phase for polystyrenes with a molecular weight above 35 000 and reversed phase gradient of decreasing polarity (methanol to dichloromethane). Under these conditions an identical dependence of elution solvent composition on sample size was found as for turbidity titrations. Due to differences in the velocity of the eluent front and the polymeric sample with porous stationary phases the polymers can be eluted as colloidal solutions Non-porous stationary phases are superior in this respect because the velocities of eluent and solutes are identical.     

Determination of diethanolamine or <Emphasis Type="Italic">N</Emphasis>-methyldiethanolamine in high ammonium concentration matrices by capillary electrophoresis with indirect UV detection: application to the analysis of refinery process waters

Alkanolamines such as diethanolamine (DEA) and N-methyldiethanolamine (MDEA) are used in desulfurization processes in crude oil refineries. These compounds may be found in process waters following an accidental contamination. The analysis of alkanolamines in refinery process waters is very difficult due to the high ammonium concentration of the samples. This paper describes a method for the determination of DEA in high ammonium concentration refinery process waters by using capillary electrophoresis (CE) with indirect UV detection. The same method can be used for the determination of MDEA. Best results were achieved with a background electrolyte (BGE) comprising 10 mM histidine adjusted to pH 5.0 with acetic acid. The development of this electrolyte and the analytical performances are discussed. The quantification was performed by using internal standardization, by which triethanolamine (TEA) was used as internal standard. A matrix effect due to the high ammonium content has been highlighted and standard addition was therefore used. The developed method was characterized in terms of repeatability of migration times and corrected peak areas, linearity, and accuracy. Limits of detection (LODs) and quantification (LOQs) obtained were 0.2 and 0.7 ppm, respectively. The CE method was applied to the determination of DEA or MDEA in refinery process waters spiked with known amounts of analytes and it gave excellent results, since uncertainties obtained were 8 and 5%, respectively.     

Recent contributions of high resolution gas chromatography to the analysis of environmental hydrocarbons

Analyses of hydrocarbon fractions from different areas of the marine environment are described to illustrate the possibilities and limitations of high resolution gas chromatography (HRGC) in the analysis of environmental samples. Examples are given of dissolved, particulate, and sedimentary hydrocarbons and organochlorine compounds; the importance of an adequate sampling of the marine environment is stressed. HR chromatographic profiles obtained in two columns of low and high polarity (SE-52 and PEG 20M) permit the sources and transport pathways of both natural and anthropogenic hydrocarbons to be traced. Analysis of tissues of marine mammals, which metabolize or excrete many of the biogenic and petrogenic hydrocarbons present in other areas of the marine environment, may provide an opportunity to obtain relatively clean profiles of many anthropogenic compounds of interest. The plotting of mass chromatograms from data compiled by COM-GC-MS remains the most appropriate method for the conclusive indentification of these compounds.     

Current mass spectrometry strategies for selenium speciation in dietary sources of high-selenium

This document reviews the most relevant mass spectrometry approaches to selenium (Se) speciation in high-Se food supplements in terms of qualitative and quantitative Se speciation and Se-containing species identification, with special reference to high-Se yeast, garlic, onions and Brazil nuts. Important topics such as complexity of Se speciation in these materials and the importance of combining Se-specific detection and molecule-specific determination of the particular species of this element in parallel with chromatography, to understand their nutritional role and cancer preventive properties are critically discussed throughout. The versatility and potential of mass spectrometric detection in this field are clearly demonstrated. Although great advances have been achieved, further developments are required, especially if speciatedcertified reference materials (CRMs) are to be produced for validation of measurements of target Se-containing species in Se-food supplements.     

Mechanical properties of BPDA-ODA polyimide fibers

An aromatic polyimide was synthesized via a one-step polycondensation reaction between biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-oxydianiline (ODA) in p-chlorophenol. The polyimide (BPDA-ODA) solution dopes were spun into fibers by means of dry-jet wet spinning. The as-spun fibers were drawn and treated in heating tubes for improving the mechanical properties. The thermal treatment on the fibers resulted in a relatively high tensile strength and modulus. Thermal mechanical analysis (TMA) was employed to study the linear coefficient of thermal expansion (CTE). Thermal gravimetry analysis (TGA) spectra showed that the BPDA-ODA fibers possessed an excellent property of thermo-oxidative degradation resistance. The sonic modulus E_s of the polyimide fibers was measured.     

C2H4-K体系中振动态至电子态传能的研究

用TEA CO_2激光将C_2H_4分子激发到高振动激发态，高振动激发态的C_2H_4分子与基态的K原子碰撞发生振动态→电子态（V→E）传能过程，根据提出的能级组模型，对测得的时间分辨原子荧光信号进行处理，获得温度在453－663 K范围内，C_2H_4-K体系中V→E传能速率的数量级为10~(-10)/cm~3·molecule~(－1)·s~(－1)，对应的碰撞传能截面约为0.30～0.80 nm．随着反应温度升高，V→E传能截面减小．上述实验结果表明碰撞体间吸引相互作用在这种非共振的V→E传能过程中起主要作用．利用多极相互作用势下的碰撞络合物模型对实验结果进行了讨论．