新型有机磁性材料及其在微波领域的应用

与铁氧体相比，所合成的有机磁性材料在很宽的温度范围内（－271.5～120℃）电感和磁性能十分稳定，在甚高频和微波频段磁损耗小，重量轻，无需高温烧结，易热压成型，且有良好的抗辐照和抗自然老化性能，最适于制作100～3000MHz频段的电子器件，它将填补铁氧体在甚高频及微波频段应用上受到一定限制的空白。     

Determination of Lead in Human Hair by High Resolution Continuum Source Graphite Furnace Atomic Absorption Spectrometry with Microwave Digestion and Solid Sampling

The content of lead in human hair was measured by high resolution continuum source graphite furnace atomic absorption spectrometry (HR-CS GFAAS) combined with microwave-assisted digestion (MAD) and direct solid sampling (DSS). Hair strands were washed, dried, and then cut into three parts (root, middle portion, and tip). For MAD-GFAAS assays, approximately 0.25 g of hair was completely digested using a mixture of concentrated nitric acid and hydrogen peroxide in a closed system. In the DSS-GFAAS assays, 0.1–0.2 mg of dried hair was directly introduced into a graphite furnace using a solid autosampler. The temperature programs were optimized and the effects of various added modifiers were compared. The results indicated that NH₄H₂PO₄ was the optimal modifier for analysis of Pb using GFAAS. Use of the optimal modifier and temperature program gave similar limits of detection for MAD-GFAAS and DSS-GFAAS of 1.16 ng/g and 0.82 ng/g, respectively. Both methods also produced satisfactory recoveries ranging from 98.69% to 103.14%. There was no significant difference observed between the Pb contents of hair strands determined by the MAD-GFAAS and DSS-GFAAS assays, which both indicated that the Pb levels increased along the hair strands. Comparison of the two methods revealed that DSS-GFAAS had several advantageous characteristics over MAD-GFAAS, including the need for much less sample material and having a less time-consuming procedure, lower sample blank absorbance, lower memory effect, and no risk of environmental pollution by digesting chemicals. The direct solid sampling technique can be employed as a good alternative to conventional wet digestion in AAS assays.     

Colour Changes During Ripening of High Pressure Treated Hard Caprine Cheese

High hydrostatic pressure (HHP) treatment of cheese intended to accelerate ripening. Along with increased proteolysis, some other parameters were affected, colour being one of them. Right after HHP and at the end of ripening time, Hunterlab colour parameters were very similar in both control and cheese treated at 400 MPa, but during ripening they evolved in a different way. HHP-treated cheese had lower lightness and higher chroma values than control cheese and both characteristics were unexpectedly associated to higher moisture values. Those differences are attributed to changes in cheese microstructure.     

Microorganisms baroinactivation of germinated mung bean (green gram) seeds

It is possible to describe the pressure degradation of microorganisms as being analogous to thermal inactivation. Equation for baroinactivation is derived from thermal death time (TDT) model D _p = D _pref 10^{(pref-p)/z _p} , where D _pref is decimal reduction time at the reference pressure (min), p _ref is the reference pressure (MPa), z _p is the pressure increase (MPa) required to reduce the D _p value by a factor of 10. This method was used for the calculation of baroinactivation model parameters of the total number of microorganisms of pressurized germinated mung bean (green gram) seeds (Vigna radiata (L.) Wilczek). Microbial contamination of germinated mung bean (green gram) seeds can be effectively decreased by treatment at a high pressure of 400 MPa, time of pressurization 5 min.     

Inorganic chemistry under high pressure

Abstract

In inorganic chemistry High Pressures can act as thermodynamic parameter and through the compression effect. Such effects can help the synthesis of new materials or induce specific properties. Such High Pressures studies are a great help for a better understanding of the chemical bonding and in field of resarches aimed at applications.     

Passive automatic exposure mechanism

In this paper, we will propose a passive automatic exposure mechanism. Different from general automatic exposure mechanism, the passive exposure mechanism directly searches suitable exposure images through the content of images. As exposure is one of the main factors to successfully take pictures, how to find an accurate exposure value is an important issue. Passive automatic exposure is the new trend and key issue of image processing. We will experiment and prove that the method we propose is effective.     

Development of superparamagnetic high-magnetization C18-functionalized magnetic silica nanoparticles as sorbents for enrichment and determination of methylprednisolone in rat plasma by high performance liquid chromatography

In this study, a novel extraction and enrichment technique based on superparamagnetic high-magnetization C₁₈-functionalized magnetic silica nanoparticles (C₁₈-MNPs) as sorbents was successfully developed for the determination of methylprednisolone (MP) in rat plasma by high performance liquid chromatography (HPLC). The synthesized silica-coated magnetite modified with chlorodimethyl-n-octadecylsilane was about 320 nm in diameter with strong magnetism and high surface area. It provided an efficient way for extraction and concentration of MP in the samples through hydrophobic interaction by the interior C₁₈ groups. Moreover, MP adsorbed with C₁₈-MNPs could be simply and rapidly isolated through placing a strong magnet on the bottom of container, and then easily eluted from C₁₈-MNPs by n-hexane solution. Extraction conditions such as amounts of C₁₈-MNPs added, adsorption time and desorption solvent, were investigated. Method validations including linear range, detection limit, precision, and recovery were also studied. The results showed that the proposed method based on C₁₈-MNPs was a simple, accurate and high efficient approach for the analysis of MP in the complex plasma samples.     

Development of novel backwash cleaning technique for reverse osmosis in reclamation of secondary effluent

The objective of the study was to further develop a novel cleaning technique for reverse osmosis in reclamation of municipal secondary effluent. This technique is a new backwash method via direct osmosis (DO) by intermittent injection of the high salinity (HS) solution without stopping of high pressure pump and it is environment and membrane friendly technique. In the study, DO-HS trials were carried out with a UF-RO pilot system which was operated on site with the secondary treated effluent as the raw feed. Different operating conditions for DO-HS treatment in the actual process were investigated. It was found that the operation for implementation of the DO-HS cleaning technique developed was easy. For the first time, the actual profiles of HS concentration, DO backwash flow rate, brine flow rate and permeate pressure during DO-HS treatment have been demonstrated. It was observed that turbidity of the brine stream during DO-HS treatment at 3 NTU was 5 times higher than that before DO-HS treatment. The results from this study have confirmed the previous hypothesis with DO-HS treatment that there would be a strong driving force for DO backwash to lift and sweep the foulants from the membrane surface which would be carried over to the brine. The optimal plant operating conditions in terms of RO feed flow rate, HS concentration and HS injection time are ready for the DO-HS method to be adopted and validated in a long-term continuous plant operation.     

High‐Pressure Synthesis,Crystal Structure,and Properties of GdS2 with Thermodynamic Investigations in the Phase Diagram Gd–S

Gadolinium disulfide was prepared by high‐pressure synthesis at 8 GPa and 1173 K. It crystallizes in the monoclinic space group P12₁/a1 (No. 14) with lattice parameters a = 7.879(1) Å; b = 3.936(1) Å, c = 7.926(1) Å and β = 90.08(1)°. The crystal structure is a twofold superstructure of the aristotype ZrSSi and consists of puckered cationic [GdS]⁺ double slabs that are sandwiched by planar sulfur sheets containing S₂^2– dumbbells. The thermal decomposition of GdS₂ proceeds via the sulfur‐deficient polysulfides GdS_1.9, GdS_1.85 and GdS_1.77 and eventually results in the sesquisulfide Gd₂S₃. GdS₂ is a paramagnetic semiconductor which orders antiferromagnetically at T_N = 7.7(1) K. A metamagnetic transition is observed in the magnetically ordered state.     

Molecularly imprinted macroporous monolithic materials for protein recognition

Synthetic materials that can specifically recognize proteins will find wide application in many fields.In this report,bovine serum albumin was chosen as the template protein.Acrylamide and N,N’-methylenebisacrylamide were employed as the functional and cross-linker monomers,respectively.Molecularly imprinted macroporous monolithic materials that can preferentially bind the template protein in an aqueous environment were prepared by combination of molecular imprinting technique and freezing/thawing preparation method.The resulted imprinted macroporous monolithic columns were evaluated by utilizing as stationary phase in high performance liquid chromatography and solid-phase extraction materials.The experimental results indicated that the imprinted macroporous monolithic column exhibited good recognition for template protein,as compared with the control protein(hemoglobin),whereas the non-imprinted polymer(prepared under the same conditions except without addition template protein) had no selective properties.