多束速调管的增益带宽

 研究了M个束、N个共振腔的多束速调管(MBK)的增益和带宽，得到了描述小信号增益和带宽与器件结构参数和电子束参数关系的公式，给出了在不同参数下增益随频率的变化曲线。分析了多腔对增益，多束对带宽的影响。计算结果表明：多腔可以提高增益；多束可以降低Q值，从而可以增中带宽，带宽增加工了3.6%，还可以提高增益；对于MBK，频率交叉调谐对增加带宽不如频率调谐好；空间电荷波只对增益有影响，对带宽没有影响。最后，预估一种L带多束速调管的增益带宽为8.1%。     

Tunable narrow-band infrared emitters from hexagonal lattices

In this work, we present both the theoretical basis as well as supporting experimental measurements for development of a novel mid-infrared thermally stimulated narrow band emitter with a spectral bandwidth of less than 10%. To achieve this, we utilize a metallized-surface 2D photonic crystal of air voids in a silicon background with hexagonal structure symmetry. Our results are based on the generation of discrete surface plasmon (SP) modes in the thin metallized layer residing on the top surface. This yields a series of adequately spaced discrete peaks in the reflection spectrum, dominated by a single sharp feature corresponding to the lowest plasmon order, in an otherwise uniform highly reflective spectrum (>90%) over most of the IR spectrum. This, in turn, gives rise to a sharp absorption feature with a correspondingly narrow thermal emission peak in the emission spectrum. Transfer matrix calculations simulate well both the position and strengths of the absorption peaks. By altering the period of the surface photonic lattice, the SP peak and emissive band can be tuned to the desired wavelength. These devices promise a new class of tunable infrared emitters with high power in a narrow spectral bandwidth. Such narrow band sources are critical to achieving high efficiency gas sensors.     

EPON媒体接入控制的关键技术研究

文章简要介绍了基于以及太网的无源光网络（EPON）这种新型的接入网技术，将其与基于ATM技术的无源光网络（APON）的优缺点进行了比较，并对其媒体接入控制（MAC）的关键技术测距及上行接入进行了讨论，初步提出了光网络单元（ONU）的软、硬件实现方案。     

基于Gibbs模型的提高图像分辨率方法

在提高图像分辨率过程中,选择合适的成像模型是获得高分辨率图像的一个关键因素。提出一种基于最大后验概率、采用Gibbs成像模型,并利用多帧序列图像重构高分辨率图像的方法,充分利用序列图像之间的累加信息,从而快速地获得较其他方法更优的高分辨率图像。     

一种新的HEMT小信号模型参数提取方法

介绍了一种高电子迁移率晶体管(HEMT)的小信号参数提取方法——综合多偏置点优化参数提取法。该文首先推导并提出了器件的模型、确定外部参数和内部参数，其次介绍了多偏置点优化算法。最后，以PHEMT器件为例进行鲁棒性和精确性测试，实验采用一系列随机起始值，结果表明，提取的参数值与经验值相差小于1％。     

钨金属化与氧化铝陶瓷高温共烧

阐述了钨金属化与氧化铝陶瓷高温共烧工艺的特点,分析了烧结过程中温度曲线和露点等工艺参数对钨金属化与瓷件结合强度、密封气密性和收缩率的影响。通过反复的试验和烧结机理分析对比,给出了最佳的控制参数。     

大功率速调管发射机水冷系统的设计

雷达发射机中大功率器件(如速调管)的强迫液体冷却是一种常用的冷却方式。本文根据某雷达发射机冷却系统的设计.介绍了大功率速调管发射机水冷系统的设计方法。     

高密度封装CAD技术研究

介绍了自行研制的高密度封装外壳设计软件、阐述了其工作原理和功能。应用该软件设计并制作出目前国内最多针脚数的外壳ＰＧＡ２５７。     

Design of high-capacity,reversible polymeric adsorbents for acidic gases

Polyethyleneimine (PEIM) samples crosslinked by a commercial epoxy resin (Epon 828) were prepared, and their adsorption capacity for acidic gases was studied. The swelling and deswelling characteristics of the crosslinked samples were also examined as part of this program. Reactivation of these adsorbents could be carried out by heat, or by a combination of heat and treatment in dilute alkalies.     

接收机有限带宽对多相码数字脉压的影响

限制接收机带宽是雷达系统中提高信噪比(SNR)的常用方法,相应的也会引起输出波形的失真。本文主要分析了多相码数字脉压雷达系统中,接收机有限带宽对脉压输出结果所造成的影响。运用五点滑动窗平均法在计算机上进行了模拟,并给出了仿真结果。