High-performance liquid chromatography of some basic drugs on a n-octadecylphosphonic acid modified magnesia-zirconia stationary phase

The high-performance liquid chromatographic behavior of some basic drugs was studied on a n-octadecylphosphonic acid modified magnesia-zirconia (C18PZM) stationary phase. The effect of mobile phase variables such as methanol content, ionic strength, and pH on their chromatographic behavior was investigated. The retention mechanism of basic drugs on the stationary phase was elucidated. The results indicate that both hydrophobic and cation-exchange interactions contribute to solute retention under most chromatographic conditions. The inherent Br?nsted-acid sites and also the adsorbed Lewis base anionic buffer constituents on accessible ZM surface Lewis acid sites play a role in the retention of ionized solutes by cation-exchange interaction. However, especially at high mobile phase pH, the retention of basic drugs depends mainly on hydrophobic interactions between solutes and support. Separations of the basic drugs on the C18PZM phase by a predominantly reversed-phase retention mode were very promising. The mixed-mode retention feature on this phase, as a result of the adsorbed Lewis base anionic buffer constituents acting as sites for cation-exchange, could also be very useful, e.g. for enhancing the chromatographic selectivity of such analytes. The C18PZM seems to be an excellent alternative to silica-based reversed-phase stationary phase for the separation of strongly basic solutes.     

Determination of moutan tannins by high‐performance liquid chromatography and capillary electrophoresis

Cortex Moutan (Radicis Cortex Moutan), the dried root bark of Paeonia moutan and P. spp., contains a series of water‐soluble tannins. With the eight components, 1 4,6‐di‐O‐GG (4,6‐di‐O‐galloyl‐D‐glucose), 2 1,2,3,6‐tetra‐O‐GG, 3 1,2,3,4,6‐penta‐O‐GG, 4 1,3,4,6‐tetra‐O‐GG, 5 3,4,6‐tri‐O‐GG, 6 1,3,6‐tri‐O‐GG, 7 3,6‐di‐O‐GG, and 8 1,2,6‐tri‐O‐GG, as marker substances, a rapid and efficient method of analysis based on HPLC and CE was developed. Using a phosphate eluent, a 5C18‐MS separating column, and a detection wavelength of 280 nm, HPLC was successfully used to analyze the eight constituents within 60 min. The analysis can be completed within 50 min, using the MEKC mode with a buffer composed of borate, SDS, and isopropanol, and a detection wavelength of 210 nm. The detection limit for the marker substances varied from 0.04 to 0.93 μg/mL for the HPLC method and 0.02 to 0.36 μg/mL for the CE method.     

An improved method of characterizing fatty acids by equivalent chain length values

A method has been developed for calculating more accurate and reproducible equivalent chain length (ECL) values of 33 straight-chain fatty acids (FA), with various positions and numbers of cis double bonds, chromatographed on DB-Wax and DB-1 columns. The dependence of ECL values on the position and the number of double bonds is described, as is a method of utilizing these relationships for the characterization of FA by gas chromatography.     

The construction and evaluation of a high pressure manifold and vessels for a Calvet type microcalorimeter

A Setaram C-80 calorimeter has been modified in order to measure the heat flow of energetic materials at pressures up to 69 MPa. A manifold and sample cells capable of operating at high pressure were designed, constructed and evaluated. This paper will describe, in detail, the high pressure manifold construction, safety assessment and calibration. As well, the results for initial trials with ammonium nitrate (AN), and pentaerythritol tetranitrate (PETN) at various pressures and heating rates will be discussed.     

耐超高温SiC(Al)纤维先驱体——聚铝碳硅烷纤维的研究

以聚硅碳硅烷(PSCS)与乙酰丙酮铝(Al(AcAc)3)为原料,在常压高温条件下反应制备出聚铝碳硅烷(PACS),经过熔融纺丝制备了PACS纤维.应用GPC、IR、XPS、29Si-NMR、27Al-NMR、TG、SEM、元素分析和增重等一系列分析,分别对PACS纤维的微观组成、结构以及性能进行了分析.研究结果表明,以原料质量配比为6∶100(Al(AcAc)3∶PSCS)合成的PACS化学式为SiC2.0H7.5O0.13Al0.018,数均分子量为1700左右,最适宜制备PACS纤维;PACS纤维中主要存在SiC4、SiC3H等结构,同时存在Si—O—Al键;在氮气气氛中,PACS纤维的陶瓷产率达到52%左右;预氧化处理,PACS纤维中Si—H键与空气中的氧反应形成Si—O—Si交联结构,较聚碳硅烷(PCS)纤维易于氧化,经过预氧化的PACS纤维陶瓷产率达到80%左右,是制备耐超高温SiC(Al)陶瓷纤维的合适纤维;用预氧化PACS纤维制备的SiC(OAl)纤维和SiC(Al)纤维抗拉强度高,耐高温性能好.     

Stochastic resonance is applied to quantitative analysis for weak chromatographic signal of glyburide in plasma

Based on the theory of stochastic resonance, a new method carried on the quantitive analysis to weak chromatographic signal of glyburide in plasma, which was embedded in the noise background and the signal-to-noise ratio (SNR) of HPLC-UV is enhanced remarkably. This method enhances the quantification limit to 1 ng ml⁻¹, which is the same as HPLC-MS, and makes it possible to detect the weak signal accurately by HPLC-UV, which was not suitable before. The results showed good recovery and linear range from 1 to 50 ng ml⁻¹ of glyburide in plasma and the method can be used for quantitative analysis of glyburide.     

Rheological investigation of the influence of molecular structure on natural and accelerated UV degradation of linear low density polyethylene

Metallocene and Ziegler-Natta (ZN) linear low density polyethylenes (LLDPEs) of different branch types and contents as well as linear high density polyethylene (HDPE) were exposed to natural and accelerated weather conditions. The degree of UV degradation of exposed samples was measured by rheological techniques and results were compared with unexposed polymers. Dynamic shear measurements were performed in an ARES rheometer in the linear viscoelastic range. The degree of enhancement or reduction in viscosity and elasticity was used as a measure of the degree of cross-linking or chain scission, respectively. The degradation results of LLDPE suggest that both cross-linking and chain scission are taking place. Chain scission dominated the degradation at high levels of short chain branching (SCB) and long exposure times. The degradation mechanism of m-LLDPE and ZN-LLDPE is similar; however, m-LLDPE showed a higher degradation rate than ZN-LLDPE of similar M_w and average SCB. ZN-LLDPE was found to be more stable than a similar m-LLDPE. Comonomer type had little influence on degradation. Dynamic shear rheology was very useful in revealing the influence of different molecular parameters and it exposed the degradation mechanism.     

Ultracentrifugation Method to Measure Water-Soluble Monomer Incorporation in Latex

Emulsion copolymerizations involving water-soluble functional monomers such as N-methylolacrylamide often result in the formation of water-soluble polymer that remains in the aqueous phase of the latex. A simple procedure is developed to determine the amount of water-soluble polymer in the aqueous phase of a high-solids latex using ultracentrifugation. Dilution of the latex with water is usually found necessary for good separation during ultracentrifugation. If the latex contains a surface-active species (surfactant) in amounts comparable to the amount of water-soluble polymer, calculation of the amount of water-soluble polymer in the serum of the original latex will require information about dilution dependent partitioning of the surfactant between the surface of the particles and the aqueous phase. This paper outlines a procedure that enables determination of the amount of water-soluble polymer in the aqueous phase of the original latex, by ultracentrifugation of the latex diluted to different concentrations. The procedure also gives the Henrys constant for the adsorption of the surfactant on the surface of the polymer particles in the latex.     

High throughput drug screening by direct RNA profiling on DNA sensors

The feasibility of DNA microarray sensor technology as a routine technique of molecular pharmacology to perform high throughput drug screening and the advantages of directly labeled RNA for a high throughput experiment are presented in this paper. A novel, single-step direct chemical labeling method for DNA microarray target samples has been developed to reduce the sample amount, cost, time and error of the experiment by eliminating the need for enzyme mediated labeling. Reproducibility of the data for high throughput drug screening is demonstrated by monitoring differential gene expression of a set of 45 gene targets involved in the genotoxic stress response pathways.     

Preparation and characterization of sulfated zirconia (SO4/ZrO2)/Nafion composite membranes for PEMFC operation at high temperature/low humidity

Fine particle superacidic sulfated zirconia (SO₄²⁻/ZrO₂, S-ZrO₂) was synthesized by ameliorated method, and composite membranes with different S-ZrO₂ contents were prepared by a recasting procedure from a suspension of S-ZrO₂ powder and Nafion solution. The physico-chemical properties of the membranes were studied by ion exchange capacity (IEC) and liquid water uptake measurements, scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis, thermogravimetry–mass spectrometry (TG–MS) and Fourier transform infrared (FT-IR) spectroscopy. The results showed that the IEC of composite membrane increased with the content of S-ZrO₂, S-ZrO₂ was compatible with the Nafion matrix, the incorporation of the S-ZrO₂ could increase the crystallinity and also improve the initial degradation temperature of the composite membrane. The performance of single cell was the best when the S-ZrO₂ content was 15 wt.%, and achieved 1.35 W/cm² at 80 °C and 0.99 W/cm² at 120 °C based on H₂/O₂ and at a pressure of 2 atm, the performance of the single cell with optimized S-ZrO₂ was far more than that of the Nafion at the same condition (e.g. 1.28 W/cm² at 80 °C, 0.75 W/cm² at 120 °C). The 15 wt.% S-ZrO₂/Nafion composite membrane showed lower fuel cell internal resistance than Nafion membranes at high temperature and low relative humidity (RH).