Synthesis of trifluoroethyl ethers from 2,2,2-trifluoroethyl chloride (HCFC-133a) in high temperature aqueous medium

Treatment of 2,2,2-trifluoroethyl chloride (HCFC-133a) with alcohols (phenols) and aqueous KOH in autoclave at 240-280 °C gives the corresponding 2,2,2-trifluoroethyl (2-chloro-1,1-difluoroethyl) ethers in good yields.     

Effect of carbonate incorporation on the structural and superconducting properties of the double chain compound Y2Ba4Cu7O15−x

Structural investigations on powder samples of Y₂Ba₄Cu₇O_15–x with different carbonate content have been performed. Powder x-ray Rietveld refinements showed the remarkable influence of carbonate incorporation on the lattice parameters. Most important is the decrease of T_c with increasing carbonate content. We assign these effects to an incorporation of the carbonate ion into the crystal lattice, copper vacancies at the Cu(1) position and a possible misorientation of the copper oxygen single chains. No change of the structure (e. g. superstructure) could be found.     

Study of the bandwidth characteristic of a non-reflection-type gyrotron TWA

With a set of equations for the self-consistent large-signal interaction derived in this paper, the bandwidth characteristics of a non-reflection-type gyrotron-TWA using a tapered waveguide and tapered magnetic field system have been analysed. Numerical calculations indicate that under defined conditions an instantaneous bandwidth of nearly 10 % at a center frequency of 35 GHz with a length of the order of only8 cm of the rf interaction region could be achieved.     

Simultaneous Determination of Aluminum and Iron in High Salt Content Matrices by Adsorptive Stripping Voltammetry. Application to Dialysis Fluids

A new analytical procedure for the simultaneous determination of aluminum(III) and iron(II) in two kinds of dialysis fluids (peritoneal and hemodialysis fluids) by differential pulse adsorptive stripping voltammetry (DPAdSV) is described. The voltammetric measurements were performed using, as working electrode, a stationary mercury electrode, and a platinum electrode and a Ag|AgCl|KCl_(sat.) electrode as auxiliary and reference electrodes, respectively, employing acetate buffer solutions at different pH as supporting electrolyte. As complexing agents, Solochrome Violet RS, Palatine Chrome Black 6BN, Chromazurol S and Eriochrome Black T were employed. For both elements, the accuracy, expressed as relative recovery R%, was very satisfactory being in the range 94–105%, the precision as repeatability, expressed as relative standard deviation s_r%, was lower than 6%, while the limits of detection were of the order of a few units of μg/L. The analytical voltammetric procedure has been validated by comparison with spectroscopic (graphite furnace atomic absorption spectroscopy, GFAAS) measurements.     

The structure and electrochemical characteristics of La0.67Mg0.33 (Ni0.8Co0.1Mn0.1) x (x=2.5–5.0) multiphase alloys for nickel-metal hydride batteries

This paper presents results concerning structure and electrochemical characteristics of the La_0.67Mg_0.33 (Ni_0.8Co_0.1Mn_0.1) _x (x=2.5–5.0) alloy. It can be found from the result of the Rietveld analyses that the structures of the alloys change obviously with increasing x from 2.5 to 5.0. The main phase of the alloys with x=2.5–3.5 is LaMg₂Ni₉ phase with a PuNi₃-type rhombohedral structure, but the main phase of the alloys with x=4.0–5.0 is LaNi₅phase with a CaCu₅-type hexagonal structure. Furthermore, the phase ratio, lattice parameter and cell volume of the LaMg₂Ni₉phase and the LaNi₅ phase change with increasing x. The electrochemical studies show that the maximum discharge capacity increases from 214.7 mAh/g (x=2.5) to 391.1 mAh/g (x=3.5) and then decreases to 238.5 mAh/g (x=5.0). As the discharge current density is 1,200 mA/g, the high rate dischargeability (HRD) increases from 51.1% (x=2.5) to 83.7% (x=3.5) and then decreases to 71.6% (x=5.0). Moreover, the exchange current density (I ₀) of the alloy electrodes first increases and then decrease with increasing x from 2.5 to 5.0, which is consistent with the variation of the HRD. The cell volume reduces with increasing x in the alloys, which is detrimental to hydrogen diffusion and accordingly decreases the low-temperature dischargeability of the alloy electrodes.     

高效液相色谱检测反－2－苯基－邻－硝基肉桂酸

初探了反－２－苯基－邻－硝基肉桂酸（ＰＮＣＡ）的高效液相色谱分离，优选出了最佳分离条件。所建立的方法简单、快速，适用于工业生产中的控制及分析。     

Comparison of combustion sources for sulfur chemiluminescence detection

Three different types of SCD combustion source have been evaluated for use in the chromatographic analysis of atmospheric sulfur compounds. The conventional FID source and the newer inverted burner source were found to be less sensitive and less stable than the flameless design. Overall, the flameless source was superior for use with HRGC-SCD.     

聚苯基不对称三嗪的热分解

用高分辨裂解气相色谱－质谱（ＨＲＰｙＧＣ－ＭＳ）考察了由对苯二眯腙和四种不同芳香族四酮合成的聚苯基不对称三嗪的热分解行为，鉴定了相应裂解产物的组成、分布及其与高分子结构的关系，并用热重法（ＴＧ）测定了它们的热分解反应动力学参数，提出了其热分解反应机理．     

Nioboxidfluoride mit Blockstrukturen — Elektronenmikroskopische Durchstrahlungsaufnahmen und ihre Simulation

Niobiumoxidefluorides Nb₅₉O₁₄₇F, Nb₃₁O₇₇F, Nb₆₅O₁₆₁F₃ and Nb₃₄O₈₄F₂ were prepared by reaction of Nb₂O₅ and Nb₃O₇F at 1 270°C. These niobiumoxidefluorides have blockstructures which were examined by high resolution electron microscopy. The observed images of the crystal structures were compared with computer simulated images.

     

Stimultaneous quantitative analysis using dual capillary columns of different polarities

Complex organic mixtures, such as coal liquefaction and oil shale products and by-products, are comprised of hundreds or thousands of individual components. State-of-the-art high resolution gas chromatography does not always provide sufficient resolution to allow accurate quantitation or identification of many compounds of interest. The concept of dual capillary column chromatography combines the different resolving characteristics of two capillary columns coated with different stationary phases into a single chromatographic run. In this approach, both columns are connected to the same injection port. Analysis of complex mixtures in this fashion can confirm the identification and quantitation of components on two columns of different polarity with little increased analysis time, can provide a means of obtaining quantitative data for individual components which are known to coelute on any one column, and can alert one to unknown coelution problems that would be undetected by gas chromatographic analysis on a single capillary column. Simultaneous dual column analysis was applied to three samples, the neutral polycyclic aromatic hydrocarbon (PAH) fraction of a Solvent Refined Coal-II (SRC-II) heavy distillate, the nitrogen-containing polycyclic aromatic compound (N-PAC) fraction of an SRC-II heavy distillate, and the basic fraction from a shale oil process water. Fused silica capillary columns coated with SE-54 and Durawax 3 were used for the analyses of the heavy distillate, while SE-54 an Carbowax 20M capillary columns were used for the analysis of the process water.