Development of a novel 6LoWPAN-based multipurpose sensor monitoring and notification system

In the area of wireless communication technologies, 6LoWPAN leverages the extensive capabilities of IPv6, even within the constraints imposed by resource-limited devices, particularly within wireless sensor networks (WSNs). The integration of 6LoWPAN into modern solutions for implementing the IPv6-based Internet of Things (IoT) is becoming increasingly important. In this paper, a sensor monitoring and notification system specifically designed for deployment over 6LoWPAN has been proposed. Multipurpose capability, scalability, and ease of deployability are the main features of the proposed system. Its architecture reflects the highest degree of flexibility and allows for a variety of use cases encountered in practical scenarios. In addition, a web interface has been developed as part of the comprehensive system architecture. This interface enables efficient management of the entire system and facilitates connection for new users and seamless integration of additional sensors. By encapsulating complex functions in a user-friendly interface, the system promotes accessibility, convenience, and an enhanced user experience. The proposed system overcomes the limitations of current approaches, thereby creating new opportunities. The flexibility of the proposed system allows it to be applied to various use cases.     

四谱段TDICCD图像传感器的设计与制作

设计并研制了一种四谱段时间延迟积分电荷耦合器件(TDICCD)图像传感器,器件将四个TDICCD集成在同一芯片上,通过在光窗对应位置上镀不同的窄带滤光膜实现多谱段分光。该TDICCD图像传感器的像元尺寸为28μm×28μm,水平寄存器的有效像元数为3 072元,行频为10 kHz,电荷转移效率高达0.999 99,饱和输出电压为2 650 mV,抗弥散能力大于等于100倍,动态范围为7 143∶1。     

基于宇称-时间对称光子晶体结构的磁场传感器研究

提出了一种基于宇称-时间(parity-time,PT) 对称结构的磁场检测微腔模型,利用水 基Fe₃O₄磁流体介质层的磁光效应和PT对称结构的光放大效应,当磁场强度发生变化时 ,引 起结构禁带中缺陷模位置的改变。因此,可以通过检测缺陷模位置实现磁场强度的检测。本 文利用传递矩阵法(transfer matrix method,TMM)从理论上分析了结构的透射光谱,在此 基础上对结构周期、介质层厚度、PT对称单元中宏观洛伦兹振荡强度等参数进行了数值优化 。优化后的仿真结果表明,该传感器能够实现有效的磁场磁强检测,磁场强度在0—500Oe 的 范围内,传感器的灵敏度可以达到97.14 nm/RIU,优值和检测极限分 别可以达到10⁴和10－7 RIU。同时, 传感器的分辨率数值最小可以达到0.05 Oe和最 大可以达到2Oe。本文所设计的传感器结构可用于高综合性能磁场强度检测设备的设计。     

A path planning model based on nested regular hexagons using weighted centroid localization

In many wireless sensor network (WSN) applications, the location of a sensor node is crucial for determining where the event or situation of interest occurred. Therefore, localization is one of the critical challenges in WSNs. Mobile anchor node assisted localization (MANAL) is one of the promising solutions for the localization of statically deployed sensors. The main problem in MANAL localization is that the path planning of the mobile anchor (MA) node should be done so that the localization error in the network will be minimal and that all unknown nodes in the network are covered. This paper proposes a new path planning approach called nested hexagons curves (NHexCurves) for MANAL. NHexCurves guarantees that it will receive messages from at least three non-collinear anchors to locate all unknown nodes in the network. The proposed model has compared six different path planning schemes in the literature using weighted centroid localization (WCL). In these comparisons, first of all, localization errors of the models are compared using some statistical concepts. Second, the variation of the localization error according to parameters such as resolution (R) and the standard deviation of noise (σ) is observed. Then, with similar approaches, the standard deviation of errors, localization ratio, scalability performances, and finally, path lengths of the models are examined. The simulation results show that the NHexCurves static path planning model proposed in this study stands out compared to other models with high localization error and localization ratio performance, especially at low resolutions, due to its path design. At the same time, the lowest error values according to σ are obtained with the proposed model among all models considered.     

传感器测温实验装置的研制

本文介绍了一个新型物理实验装置,把传感器引入了实验教学。此项实验物理方法丰富且具有设计性质。     

苦味酸荧光光化学传感器在药物分析中的应用

苦味酸水浴液对固定在增塑的聚氯乙烯（ＰＶＣ）膜中的蒽有可逆荧光熄灭作用，据此研制了测定苦味酸的荧光光化学传感器。该传感器的敏感膜的最佳组成为６～８ｍｇ蒽、５０ｍｇＰｖＣ粉、１００ｍｇ邻苯二甲酸二异辛酯。测定苦味酸的浓度范围为３．０４×１０￣（－６）～６．１６×１０￣（－３）ｍｏｌ／Ｌ，重现性良好，响应时间为５～４０秒，该传感器选择性好，许多常见亲脂明离子不干扰测定，可用于药物奎宁及辛可宁的间接测定。     

A Novel Proton Sensor with Luminescence and Color Signaling Based on Platinum(II) Terpyridyl Acetylide Complex

Molecular switches that are controllable, reversible and readable at molecular level are an essential compo-nent of molecular electronics1 and chemical sensors.2-6 Of particular interest are the molecules which show dramatic and reversible changes in color and/or lumi-nescence in visible spectral region upon exposure to specific substrates. A number of chromophore- spacer-receptor systems that can selectively recognize specific guest molecules at their receptor site and pro-duce measurable col…     

Organopolysiloxanes as Chemically Sensitive Coatings for Optical Fibers

Various types of UV-curable organically modified siloxanes have been synthesized by the sol-gel method with the aim of fabricating chemically sensitive coatings for silica optical fibers. The refractive index of the coating material can be tailored in the range from 1.46 to 1.56 and sensitivity towards CO2 is achieved by incorporation of amino groups. The interaction of the cured layers with CO2 or with hydrocarbons has been studied in immersion experiments. Both the reaction of CO2 with incorporated amino groups and the penetration of hydrocarbons into the layer induce changes of the light absorption coefficient and the refractive index of the coating which are detected by measuring the output light intensity from the fiber.     

In situ prepared polypyrrole for low humidity QCM sensor and related theoretical calculation

In situ preparation of polypyrrole (Ppy) by photo-polymerization coated on a quartz crystal microbalance (QCM) as a low humidity sensor was reported. Different concentrations of Ppy films say 0 wt.% (as blank), 0.1, 1, and 10 wt.% were investigated to measure humidity concentrations between 14.7 and 5412.5 ppm_v. The adsorption/desorption behavior was also examined at humidity concentration 510.2 ppm_v. The sensitivities of 0, 0.1 and 1 wt.% Ppy films at 51.5 ppm_v were 0.143, 0.219 and 0.427, respectively. For 1 wt.% Ppy, the highest sensitivity was obtained. The slope and correlation coefficients (R²) for 1 wt.% Ppy at the ranges of 14.7–898.6 ppm_v were 0.0646 and 0.9909, respectively. A series of molecular simulations have been carried out to calculate bond energy for the water molecule interaction with Ppy, which was found to be 3 kcal/mol indicating the existence of hydrogen bonding during the sorption process. Based on Langmuir isotherm adsorption assumption, for 0.1 and 1 wt.% Ppy films, the association constants were 2606.30 and 5792.98, respectively. This larger association constant for 1 wt.% Ppy film explains higher sensitivity.     

检测易爆气体的催化发光传感器研究

报道了一种用于定量分析易爆气体混合物丙烷和异丁烷的基于碳酸锶纳米材料的催化发光传感器。基于该传感器在不同温度下对两种气体的灵敏度不同，在320℃和342℃两个工作温度下，两种气体的浓度范围均为1000mL／m^3～10000mL／m^3时，分别建立了混合组分浓度相对催化发光强度的两个线性回归方程。在342℃时，丙烷和异丁烷的检出限（3σ）分别为50mL／m^3和20mL/m^3。可通过解上述两个联立方程式求得未知混合物中两组分的浓度。外来物质甲烷、乙烷、CO、氨气通过传感器时，甲烷和乙烷分别引起5．6％和17．2％的干扰，其它气体不干扰测定。20000mL／m^3的水蒸气不干扰2000mL／m^3丙烷和异丁烷气体的测定。用该法分析了人工合成样品中两种气体的浓度。