La2O3-Mo5Si3/MoSi2复合材料的高温氧化行为

研究了0．8％La2O3-MosSi3／MoSi2复合材料在1200℃空气中的高温氧化行为。结果表明：0．8％稀土和MoSi3的加入，使材料的抗氧化性能降低。MosSi3含量越高，材料的抗氧化性能越差。当MosSi3含量低于30％时，在氧化初始阶段，质量变化呈直线下降，随着氧化的进行，氧化逐渐增重，材料表面形成较致密的SiO2阻止了材料的进一步氧化，使得氧化增重较小。而0．8％La2O3-40％Mo5Si3／MoSi2复合材料却出现了“粉化”现象。0．8％La2O3．MosSi3／MoSi2复合材料抗氧化性能的降低，归因于Mo5Si3差的抗氧化性和材料致密度的降低；另外，稀土和Mo5Si3的加入，细化了材料的晶粒，使晶界面积增加，加速了氧在晶界中的扩散，促进了材料的氧化。     

A novel method for synthesizing diorganylphosphinous acids from red phosphorus and arylalkenes

The reaction of styrene and -methylstyrene with P in aprotic polar solvents in the presence of KOH affords diorganylphosphinous acids.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1680–1681, September, 1994.     

An unusual new reaction of α-olefins with magnesiumn-alkyl derivatives catalyzed by Cp2ZrCl2

The reaction of organomagnesium compounds (OMC) containing alkyl radicals of normal structure with -olefins, resulting in the formation of alkenylorganomagnesium compounds and accompanied by hydride transfer was discovered and systematically investigated. A scheme providing for the formation of zirconacyclopentane complexes was proposed for the mechanism of the reaction.Institute of Organic Chemistry, Ural Branch, Russian Academy of Sciences, 450054 Ufa. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 5, pp. 1187–1196, May, 1992.     

表面包覆改性对纳米CeO2分散性的影响

了改善纳米CeO2在Zn-Al类共晶合金中的分散性,采用超声液相包覆法对纳米CeO2进行表面活性剂表面包覆改性,并用AES测定了包覆层的厚度,用TEM研究了CeO2的团聚状况,用TGA分析了有机物包覆层的炭化温度范围,最后用FE-SEM观察了CeO2在复合材料中的分散情况。结果表明,包覆在纳米CeO2表面的厚度约为20 nm的表面活性剂层提高了微粒的分散性,而且该包覆层在495℃时已经炭化。热力学计算的结果也表明,炭化层能与氧化膜反应,该反应提高了CeO2与基体间的润湿性,并使其均匀分布在基体合金中。     

KF－Al2O3催化下3，4－二氢－2H－吡喃[3,2-h]喹啉衍生物的合成

芳醛、8－羟基喹啉与丙二腈或氰乙酸乙酯KF－Al2O3催化下反应生成一系列新 的3，4－二氢－2H－吡喃[3,2-h]喹淋衍生物，产物的结构通过单晶X射线确证。     

苯并咪唑衍生物的合成改进

利用空气作氧化剂, 无需任何催化剂, 以甲醇作溶剂, 芳香醛与邻苯二胺反应一步合成苯并咪唑衍生物, 产率均超过69%, 产物的结构通过元素分析、红外光谱和核磁共振氢谱确证, 该方法具有操作简单、反应条件温和、环境友好的优点.     

Protein-coated β-ferric hydrous oxide particles: An electrokinetic and electrooptic study

Using microelectrophoresis and electric light scattering techniques, we investigated the adsorption characteristics, surface coverage and surface electric parameters of superstructures from two isoforms of plastocyanin, PCa and PCb, in an oxidized state adsorbed on β-ferric hydrous oxide particles. The surface electric charge and electric dipole moments of the composite particles and the thickness of the protein adsorption layer are determined in a wide pH range, at different ionic strengths and concentration ratios of PC to β-FeOOH. The adsorption of the two proteins was found to shift the particles’ isoelectric point and to alter the total electric charge and the electric dipole moments of the oxide particles to different extent. A “reversal” in the direction of the permanent dipole moment is observed at lower pH for PCb- than for PCa-coated oxide particles. Strict correlation is found between the changes in the electrokinetic charge of the composite particles and the variation in their “permanent” dipole moments. Data suggest that the adsorption of the proteins is driven by electrostatic and/or hydrophobic interactions with the oxide surfaces dependent on pH. The adsorption behaviour is consistent with the involvement of the “eastern” and “northern” patches of the plastocyanin molecules in their adsorption on the oxide surfaces that are differently charged depending on pH.     

微乳凝胶法制备MoO3/SiO2纳米复合氧化物及DSC-TG分析

由微乳凝胶法制备了一系列不同MoO3含量的MoO3/SiO2纳米复合氧化物,运用DSC-TG,TEM,XRD和FT-IR等技术对其进行了相应表征.结果表明:所制备复合氧化物适宜的焙烧温度为300℃;样品粒径分布在20~24 nm;样品中MoO3在SiO2表面分散良好,其单层分散阈值在12~12.5%之间;表面Mo与Si原子以Mo—O—Si键联接.     

机械球磨与反应烧结合成Sr2CeO4发光体的研究

Sr₂CeO₄ phosphor was synthesized by mechanical milling and reactive sintering in this work. The solid state reaction of SrCO₃and CeO₂ (2∶1) started at about 850 ℃ and completed at 1 000 ℃ for about 4 h. Two types of formation mechanism of Sr₂CeO₄ were proposed. When the starting powder mixture was fired above 1 000 ℃, the unstable intermediate phase SrCeO₃was developed, which then reacted with SrCO₃to form the final product Sr₂CeO₄, however, SrCO₃and CeO₂ converted directly to Sr₂CeO₄ at a lower temperature. The XRD results showed the crystal structure of Sr₂CeO₄ was orthorhombic. The emission spectra displayed a broad band with maximum at about 465 nm. The mechanical milling of starting power mixture and the sintering temperature had no effect on this emission spectra.