中压变频器在宣钢炼钢厂除尘风机中的应用

本文介绍了SIMOVERT MV中压变频器在宣钢炼钢厂一次除尘风机中的应用情况。变频器现场运行表明，采用中压变频器对转炉除尘风机进行调速节能获得了成功，节能效果明显。     

Property improvement of pulsed laser deposited boron carbide films by pulse shortening

Growth characteristics and surface morphology of boron carbide films fabricated by ablating a B₄C target in high vacuum with a traditional KrF excimer laser and a high brightness hybrid dye/excimer laser system emitting at the same wavelength while delivering 700 fs pulses are compared. The ultrashort pulse processing is highly effective. Energy densities between 0.25 and 2 J cm⁻² result in apparent growth rates ranging from 0.017 to 0.085 nm/pulse. Ablation with nanosecond pulses of one order of magnitude higher energy densities yields smaller growth rates, the figures increase from 0.002 to 0.016 nm/pulse within the 2-14.3 J cm⁻² fluence window. 2D thickness maps derived from variable angle spectroscopic ellipsometry reveal that, when ablating with sub-ps pulses, the spot size rather than the energy density determines both the deposition rate and the angular distribution of film material. Pulse shortening leads to significant improvement in surface morphology, as well. While droplets with number densities ranging from 1 × 10⁴ to 7 × 10⁴ mm⁻² deteriorate the surface of the films deposited by the KrF excimer laser, sub-ps pulses produce practically droplet-free films. The absence of droplets has also a beneficial effect on the stoichiometry and homogeneity of the films fabricated by ultrashort pulses.     

镍-酸性铬兰K络合物吸附波

用微分脉冲溶出伏安法研究了镍(11)与酸性铬兰K(ACBK)所生成的络合物在悬汞电极上的电化学特性及电化学反应机理，发现电极反应为镍与酸性铬兰K所生成的络合物吸附在电极表面后发生的不可逆还原。在HCl-硼砂介质中(pH8．67)，络合物在-316mV处有一吸附还原峰，其峰电流与镍浓度在0．001～0．010μ/mL范围内呈现良好的线性关系，其最低检出浓度为0．0005μg／mL。     

High Voltage Pulse Power and the Technics for the Capacitor Power-Storage Type

Lower hybrid wave （LHW）, electro cyclotron （EC） and neutral beam injection （NBI） etc. are the important methods of auxiliary heating. They would be devoted to the HL-2A tokamak step by step. In order to satisfy the debug of each system and the need of the experiment, the system should be equipped with high voltage pulse power （HVPP） according to the requirement.     

Dynamics of Single-Pulse Echo Signals under the Conditions of Zeeman Switching

The signals of a single-pulse echo (SE) generated on nonresonant excitation of an inhomogeneously broadened two-level system by a radio-frequency pulse (RFP), against the background of which a magnetic video pulse (MVP) of certain length has been switched on, have been described analytically. It is established that under the conditions of such excitation several SE signals are formed whose generation moments are determined by the duration and amplitudes of the RFP and MVP. The amplitudes of some of these signals depend on the Rabi frequency according to a quadratic law, and the amplitudes of others depend on this frequency according to a biquadratic law. It has been established that the mechanism underlying the appearance of these signals is associated with zero beats arising as a result of superposition of the magnetization fluctuations at variable frequencies and at a frequency of detuning from resonance. It is shown that in the limiting case, where the RFP duration considerably exceeds the duration of the MVP or is comparable with it, the number of SE signals decreases to two. Theoretical results on the formation of SE and the dependence of the amplitude of these signals on the MVP amplitude agree with the experimental data on NMR pulsed signals in ferromagnetic materials.     

地面附近的高空核爆电磁脉冲环境

 主要研究在高空核爆的双指数类型电磁脉冲平面波入射时，地面附近的电磁脉冲环境。计算给出了在不同入射波状态，不同地表介质电气特性和距地面不同高度等条件下的电磁脉冲环境参数，归纳了一些规律性认识。结果显示：地面附近的电场会随距地面高度的不同而发生显著的变化，对于水平场分量，其反射场总是试图抵消入射场，而对于垂直场分量，其反射场叠加在入射场上，使得地面附近的垂直场强幅值一般大于入射波场强幅值；当入射波仰角增大时，合成电场波形的脉冲宽度会变宽；地表介质的电气特性参数不同也会对地面附近电场的波形和幅值造成一定的影响。     

Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

脉冲电镀最佳参数之探索和优化

本文利用正交实验法对脉冲电镀各控制参数进行试验,对影响分散能力、镀层可靠性及外观质量的各种因素进行探讨,寻找影响外观质量的显著因子并加以控制,同时进一步优化脉冲电镀的工艺参数。     

L波段窄脉宽500W固态功放组件的设计

介绍了作者研制的应用于固态雷达发射机上的L波段500W固态功放组件的工作原理、用途及其主要技术指标。描述了功放组件的设计过程和测试结果。该功放组件在窄脉宽条件下实现了快速上升沿,性能优良,工作稳定可靠。     

雷达仿真系统中电磁干扰环境的仿真设计和实施

雷达仿真系统是为检测雷达设备的抗干扰能力以及在各种电磁环境下的工作性能而设计的，包括有源干扰和无源干扰的模拟仿真。本文阐述了无源干扰即杂波的散射模型和仿真过程；从同步脉冲干扰的基本原理出发，阐明在雷达工作环境仿真系统中距离拖引、速度拖引、虚假目标等同步脉冲有源干扰的设计和实施过程；并针对工作在搜索和跟踪交替模式下的相控阵雷达提出自适应综合干扰方式；最后分析并总结了系统仿真时为真实、有效地模拟电磁干扰环境应注意的关键问题。