单件小批生产系统下模糊优化的动态随机投入产出模型

本文针对单件小批量生产系统 ,建立了模糊优化的动态随机投入产出模型 ,同时给出了该模型的递推解法 ,并用此模型对某单件小批企业在生产计划期的商品量进行了规划     

Average Atom Model in Hot Plasmas

Ａｖｅｒａｇｅ　Ａｔｏｍ　Ｍｏｄｅｌ　ｉｎ　Ｈｏｔ　ＰｌａｓｍａｓＡｖｅｒａｇｅＡｔｏｍＭｏｄｅｌｉｎＨｏｔＰｌａｓｍａｓ￥ＹｕａｎＪｉａｎｈｕｉ；ＳｕｎＹｏｎｇｓｈｅｎｇ；ＺｈｅｎｇＳｈａｏｔａｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＡｐｐｌｉｅｄＰｈｙｓｉｃ...     

CAD OF MILLIMETER WAVE OSCILLATORS WITH THE FDHB TECHNIQUE

In this paper the modelling, analysis and optimization of millimeter wave oscillatorsare investigated by using the a frequency-domain harmonic balance technique (FDHB), where theexternal-circuit impedances looking outside from the active device are calculated with a combinedtechnique of modes expansion, Galerkin, and collocation methods. The optimization results arein agreement with the experimental ones, which show the reliability of the presented model andoptimization.     

模糊数学在电视机故障诊断中的应用

本文介绍了应用模糊数学方法进行计算机辅助诊断电视机的故障原因,这种方法有效性在于建立模型的因果关系正确性和自动搜索范围及速度。     

集群系统与公用网互连的仿真模型和模拟算法

在讨论ＭＰＴ１３２７信令的集群移动通信系统与国内Ｎｏ．７信令的ＰＳＴＮ网间互连，帝现两种信令配合中，研究了集群系统的仿真模型和模拟算法，同时模拟出整个集群系统的工作情况，运行结果证实了所提方案的可行性与准确性。     

ATM交换结构的成组输入排队模型

本文提出一种新的ATM交换排队结构——成组输入排队结构(GIQ),其基本思想是将输入端分组,同一组的输入端共享排队缓存。GIQ不仅能提高缓存的利用率和系统的吞吐率(达到96.2％),而且还能大大改善交换结构的抗突发能力。采用计算机仿真模拟的方法,分析了GIQ在均匀连续业务流和突发业务流下的性能,并与其它输入排队结构的性能进行了比较。     

室内声扩散模型比较研究

室内扩散反射是计算机建模过程中必须考虑的现象。对现有的5种常用扩散模型进行了综述和比较研究。分析表明，随机扩散模型仍然是最为实用的一种模型。     

Lifetime study of high-spin states in 104,105In

In the neutron deficient isotopes _104,105In lifetimes of high spin states in the range from 0.5 ps to 600 ps have been measured in a coincidence recoil distance Doppler shift (RDDS) experiment. By combining the Doppler shift attenuation (DSA) and RDDS methods at few μm flight distances, the problem of delayed feeding has been avoided and very short lifetimes in the range 0.5–0.8 ps have been determined. Shell model calculations with strong restrictions for the neutron orbitals reveal good agreement with experimental level energies and still fair agreement for most measured B(M1) and B(E2) values. Received: 30 June 1998     

Excess enthalpies of some 2-alkanone + 1-chloroalkane binary mixtures at 25 and 35°C

Excess molar enthalpies h^E at 25 and 35° C and atmospheric pressure, are reported for the binary mixtures formed by a 2-butanone and 2-pentanone with 1-chlorobutane, 1-chloropentane, 1-chlorohexane, or 1-chlorooctane. The h^E values for all the mixtures are positive, increasing as the 1-chloroalkane length increases and as the ketone length decreases. Excess molar enthalpies depend slightly on the temperature. The experimental values together with those from the literature were used to calculate the interaction parameters for the Dang-Tassios version of the UNIFAC model.Communicated at the Festsymposium celebrating Dr. Henry V. Kehiaian's 60^th birthday, Clermont-Ferrand, France, 17–18 May 1990.     

产量──密度模型讨论

本文给出产量与密度函数关系