多色蓝在核酸分子上的Langmuir聚集吸附

用微相吸附-光谱修正（MPASC）新技术研究核酸与多色蓝(PCB)探针分子间的相互作用，分析核酸分子内双静电膜的形成与Langmuir吸附的关联性.通过pH 7.24的介质核酸-PCB反应的光谱研究，测定了结合产物的物理化学参数：结合比1PCB:2DNA-PCB、1PCB:3RNA-PCB, 平衡常数KDNA-PCB=5.42×104， KRNA-PCB=2.82×104,摩尔吸收系数ε(DNA-PCB, 625 nm)=5.65×103（mo1－1•L ）•cm－1， ε(RNA-PCB, 625 nm)=3.85×103 （mol－1•L）•cm－1.结果表明， RNA分子仅形成约60％双螺旋结构链，核酸双螺旋每一周期的负静电沟最大聚集10个PCB分子.该吸附反应用于核酸样品测定，结果良好.     

Comparison of EI and metastable atom bombardment ionization for the identification of polyurethane thermal degradation products

Polyurethanes are widely used in the manufacture of commercial products such as foams and paints. During combustion, these polymers can generate isocyanates, which induce adverse health effects. Polymer pyrolysis (Py) hyphenated with mass spectrometry (MS) allows the investigation of polymer thermal degradation over time/temperature. A diphenylmethanediisocyanate (MDI) polyurethane foam was analyzed with electron ionization (EI) and metastable atom bombardment (MAB) ionization at a pyrolysis temperature of 400 °C. The recently introduced MAB ionization source uses discrete energy stored in metastable atoms of gases to ionize the analytes. This characteristic allows modulation of the ionization energy by simply changing the ionization gas. The extensive fragmentation of molecular ions observed using EI 70 eV is not totally eliminated with EI 10 eV. However, only molecular ions are observed with MAB using N₂ as the ionization gas. Temperature gradients were used to separate the products generated during the thermal degradation of a 1,6-hexamethylenediisocyanate (HDI) polyurethane paint. The analysis of mass spectra was facilitated owing to a selective desorption of pyrolysis products. Furthermore, changing the MAB ionization gas allows elucidation of the structure of the pyrolysis products by controlling the extent of their fragmentation. During these experiments, isocyanic acid, methyleneisocyanate, ethyleneisocyanate, propylisocyanate and butylisocyanate were detected.     

Rapid determination of organochlorine pesticide residues in feeds by capillary gas chromatography

A simple micro-method is described for determination of 15 organochlorine pesticide residues in mixed feeds. Clean-up of the petroleum ether extract is by basic alumina minicolumn chromatography and quantitative identification is by capillary gas chromatography with electron capture detection. Cyanopropyl-polysiloxane chemically bonded fused silica capillary columns have been used to perform high resolution analyses in short time as well as to overcome possible interferences by PCBs. Recovery, repeatability, and detection limits of the proposed procedure are checked and results are also reported for non random samples of 180 feeds collected in Italy.     

1,6-六亚甲基二异氰酸酯自聚产物的结构表征

用IR与NMR表征了用醋酸钾为催化剂时 1,6 六亚甲基二异氰酸酯 (HDI)自聚产物的结构 .结果表明 ,自聚主产物是三聚体异氰脲酸酯 ,主要含有三聚体异氰脲基、异氰酸根 ,同时含有由杂质带来的微量氨基甲酸酯、脲基甲酸酯基、取代脲基、缩二脲基 .一维核磁谱及二维化学位移相关谱分辨出 7种羰基 ,一种NCO基 ,确定了氮上 8种不同取代结构的分子链连接情况 .通过建立理论模型 ,定量地描述了自聚产物的结构 .     

高速系统PCB设计中的几个关键问题

随着微电子技术的飞速发展，高速大规模集成电路的广泛应用，高速系统的设计也越来越受到重视，高速系统与低速系统的PCB设计有很大不同。本文从实际设计的角度介绍了高速系统中电源、接地、时钟电路、过孔等的设计和需要注意的问题。     

Anaerobic Degradation of PCB in Soils

Abstract

The anaerobic degradation of PCB in loamy and clayey soils containing indigeneous microflora was studied. The anaerobic conditions were created by an argon atmosphere in the flasks containing soil flooded by a liquid medium with glucose. GC-ECD analysis of soil extracts after 40 day incubation showed, in addition to the concentration changes of the less chlorinated PCB congeners, a significant decrease in the concentration of highly chlorinated congeners in both soils. The results indicate that in both soil types reductive dehalogenation of PCB congeners was encountered.     

Interference of Transformer oil Matrices to the Internal Standards on PCB Quantification

Abstract

Polychlorinated biphenyls (PCBs) are toxic, perssstent, global environmental contaminants which were formulated as complex mixtures of congeners. Many methods have been developed in the past to analyze PCB in transformer oil samples for regulatory purposes. The most important consideration in the cleanup procedure is the ability to remove the oil from the sample matrix, since trace amount of oil will interfere with the subsequent GC-MS analysis. Electron capture detection (ECD) has been the most common method for gas chromatographic analysis of PCBs because of its high sensitivity toward halogenated compounds. ECD can also respond to some non-PCB compound resulting in biased concentrations of PCB. In this work, a two-stage cleanup method, using DMSO liquid/liquid extraction and HPLC column chromatography. has been applied to two types of transformer oil. Five internal standards have been selected to show their performance in the presence of different oil matrices. The comparison of the PCB quantification at different conditions for GC-MS and GC-ECD will be demonstrated.     

多层PCB中内埋电阻的特性分析及应用

计算、分析了多层PCB内埋平面电阻的特性，并将其应用于一种多层射频板威尔金森功分器的设计，研究并分析了平面电阻尺寸对该功分器射频性能的影响。     

Determination of dissolved and particle-bound PCB congeners at ultra-trace concentrations in water

Adsorption of 10 PCB congeners in aqueous solutions on glass-fibre filters taken from different boxes but of the same type were not significantly different. The standard deviations using filters from the same box were below 10% at concentration levels of 4.1?ng?L^?1. At this level, the adsorption of dissolved PCB at the filters was in the range of 5–20% depending on the congener. This led to a procedure for determination of dissolved and particle-bound congener in authentic landfill leachate, which included correction for adsorption losses. The procedure was based on filtration through glass-fibre filters, followed by trapping of the PCB in the eluate on solid-phase extraction (SPE) disks. After separate supercritical fluid (SFE) extractions, with carbon dioxide, of the filters as well as of the SPE disks, the extracts were analysed on a two-column capillary GC-ECD system. Corrections for congener adsorption on glass-fibre filters were made, from which corrected distribution constants between particle-bound and dissolved PCB congener in the water phase could be obtained for authentic landfill leachate. These values (10⁴–10⁵) agreed well with those obtained by others.     

Application of Non-Destructive X-Ray Fluorescence Spectrometry to the Analysis of Suspended Matter in Sea Water

Abstract

In the framework of remote sensing studies concerning coastal transport of pollution in the Northern Adriatic Sea, a method has been developed for the quantitative determination of sulphur, iron, titanium, calcium, phosphorus, silicon, aluminium, magnesium in suspended matter of sea water.

The suspended material was collected by filtering on millipore membrane filters with pore width of 0.45 μ and directly analysed by X-ray spectroscopy. For calibration dried solution and particulate standard samples were used. Limits of sensitivity and precision of the method are reported.

Correlations between the concentration of these elements and the total suspended matter/chlorophyll are discussed.

The aim is to study the geochemical composition of particulate matter and its variations within the geographical site of the sea basin and the seasonal conditions. The approach is to consider aluminium and the other elements normalized on Al. On the basis of a matrix correlation analyses of some sets of data chosen in the restricted area for investigation, some hypothesis on superficial distribution of clay, carbonate, iron hydrous oxides and other mineral detrites, are taken into account. The results confirm the complex situation existing in the offshore area of the Venice lagoon from a geochemical point of view.

The suspended matter seem to be argillaceous in the Southern part of the investigated area and semi-argillaceous with hydrous oxides and carbonates in the Northern part which is influenced by the Piave river.