An Automatic Molecular Dispenser of Chloride

The combined activity of the 1.1.1‐cryptand and of a dicopper(II) bistren cryptate complex including chloride makes the Cl^? ion be continuously and slowly delivered to the solution, without any external intervention. The 1.1.1‐cryptand slowly releases OH^? ions, according to a defined kinetics, and each OH^? ion displaces a Cl^? ion from the cryptate. Chloride displacement induces a sharp colour change from bright yellow to aquamarine and can be conveniently monitored spectrophotometrically, even in diluted solutions. The 1.1.1‐cryptand is the motor of a molecular dispenser (the dicopper(II) cryptate) delivering chloride ion automatically, from the inside of the solution.     

Efficient Green‐Light‐Emitting Electrochemical Cells Based on Ionic Iridium Complexes with Sulfone‐Containing Cyclometalating Ligands

A new approach to obtain green‐emitting iridium(III) complexes is described. The synthetic approach consists of introducing a methylsulfone electron‐withdrawing substituent into a 4‐phenylpyrazole cyclometalating ligand in order to stabilize the highest‐occupied molecular orbital (HOMO). Six new complexes have been synthesized incorporating the conjugate base of 1‐(4‐(methylsulfonyl)phenyl)‐1 H‐pyrazole as the cyclometalating ligand. The complexes show green emission and very high photoluminescence quantum yields in both diluted and concentrated films. When used as the main active component in light‐emitting electrochemical cells (LECs), green electroluminance is observed. High efficiencies and luminances are obtained at low driving voltages. This approach for green emitters is an alternative to the widely used fluorine‐based substituents in the cyclometalating ligands and opens new design possibilities for the synthesis of green emitters for LECs.     

Integrated Devices to Realize Energy Conversion and Storage Simultaneously

Other forms of energy are generally converted to electric energy and then transported to electrochemical devices, where the energy is stored, by external electric wires. To further improve total energy conversion and storage efficiency, interest in simultaneously realize the energy conversion and storage in a single device has increased. This Concept describes recent progress in developing such novel integrated energy devices. Both planar and wire architectures are carefully illustrated with an emphasis on the “energy wire” which has been the focus of past developments due to its unique and promising applications, such as being woven into clothes or other complex structures by conventional textile technology. The current challenges and future directions of the integrated devices, particularly in the wire architecture, are summarized.     

A Bipodal Dicyano Anchor Unit for Single‐Molecule Spintronic Devices

The conductance through single 7,7,8,8‐tetracyanoquinodimethane (TCNQ) connected to gold electrodes is studied with the nonequilibrium Green’s function method combined with density functional theory. The aim of the study is to derive the effect of a dicyano anchor group, ?C(CN)₂, on energy level alignment between the electrode Fermi level and a molecular energy level. The strong electron‐withdrawing nature of the dicyano anchor group lowers the LUMO level of TCNQ, resulting in an extremely small energy barrier for electron injection. At zero bias, electron transfer from electrodes easily occurs and, as a consequence, the anion radical state of TCNQ with a magnetic moment is formed. The unpaired electron in the TCNQ anion radical causes an exchange splitting between the spin‐α and spin‐β transmission spectra, allowing the single TCNQ junction to act as a spin‐filtering device.     

Co‐Conformational Distribution of Nanosized [2]Catenanes Determined by Pulse EPR Measurements

The co‐conformational ensembles of three differently sized [2]catenanes were studied by measuring pair correlation functions corresponding to the separation of nitroxide spin labels—one attached to each of the two macrocycles—with the double electron–electron resonance (DEER) experiment. A geometric model for the [2]catenanes was derived that approximates the macrocycles by circles and takes into account the topological constraint. Comparison of the experimental to the theoretically predicted pair correlation functions gives insight into the co‐conformational distribution and the size of the macrocycles. It was found that the macrocycles of the medium‐ and large‐sized catenanes in chloroform are close to fully expanded, while they are partially collapsed in glassy o‐terphenyl. For the small‐sized catenane, moderate interaction between the unsaturated sections of the macrocycles in chloroform is indicated by a slight overrepresentation of short label‐to‐label separations in the pair correlation function.     

Radiation‐induced migration of additives in PVC‐based biomedical disposable devices. Part 1. Surface morphology by AFM and SEM/XEDS

Two different types of plasticized poly(vinyl chloride) (PVC) used for biomedical disposable devices—extruded and injection moulded—were studied in the non‐sterilized condition and after 25 and 50 kGy of beta irradiation. The polymer surfaces were analysed by scanning electron microscopy (SEM) equipped with an x‐ray energy‐dispersive spectroscopy (XEDS) and by atomic force microscopy (AFM). The inner surface of two parts of a venous line showed a different morphology according to their original formulation (for extrusion or injection moulding process) and reacted differently on sterilization with beta irradiation. Moulded parts were affected only slightly by the radiation step, whereas the variations were bigger for the extruded parts. In order to gain the best performances for the medical devices studied, the utmost care must be taken in the sterilization step, which should be optimized as well as the other steps of the manufacturing process. Copyright © 2003 John Wiley & Sons, Ltd.     

Miniaturized surface engineered technologies for multiplex biosensing devices

The demand for quick, accurate, and affordable point-of-care (POC) devices increases with the advancement in the dimensions of nanotechnology and digital interfaces (Internet of Things). The future of diagnostic requires the platform which can provide us the following benefits i. e., on-site detection, qualitative as well as quantitative analysis, easy to use, portable, low sample requirement, cost-effective, and have multiplexing proficiency. Multiplex biosensing platforms (MBPs) have the above following advantages so are going to be mostly used in various healthcare applications in near future. MBPs have the potential to fulfill the ‘ASSURED’ criteria specified by the World Health Organization (WHO) for remote-limited settings. This review paper focuses on miniaturized platforms that have multiplexing benefits for the bioanalysis of different clinical samples related to various healthcare applications. In addition to this, screening of pesticides, antibiotics, and hazardous metal ions with these surface-engineered devices has also been accounted in food and environmental samples. Some of the advanced techniques including microfluidics (Lab-on-a-chip), wearable smart devices, and CRISPR/Cas system for multiplexing applications are briefly described here. Furthermore, various needs, challenges, and prospects in commercializing these multiplexed surface-engineered devices have been discussed in this review.