An investigation into the construction of molecular models by the template joining method

Summary The results of a wide-ranging investigation into some of the different methods available for performing the joining of templates to build molecular models show that the choice of algorithm can significantly affect the quality of the results obtained, and different algorithms are most suited to particular categories of join.     

聚4-重氮基苯乙烯与聚苯乙烯磺酸钠的自组装

1991年Ｄｅｃｈｅｒ等将带相反电荷的聚电解质 ,于水溶液中交替沉积在片基上 ,制备了多层超薄膜[1] ,这种制膜方法现称为静电自组装 .它操作简单 ,无需专用设备 ;一般在水体系进行 ,对环境友好 ;静电力比范德华力强 ,使它比ＬＢ膜稳定 ,所以近年来有很大发展[2 ] .现在自组装成膜驱动力已从静电力扩展到氢键力、电荷转移相互作用、疏水相互作用等 ,用于组装的组分也从聚电解质扩展到多官能团小分子、胶体粒子、无机纳米颗粒 ,ＤＮＡ、蛋白质等生物大分子等[3～ 11] .虽然自组装膜比ＬＢ膜稳定 ,但它也不耐极性溶剂、电解质水溶液等侵蚀 .如…     

Synthesis of N-（α-Alkoxyalkyl）benzotriazoles Catalyzed by Acidic Ionic Liquid at Room Temperature

N-（α-Alkoxyalkyl）benzotriazoles were synthesized via the condensation of benzotriazole with various aldehydes and alcohols catalyzed by acidic ionic liquid [hmim]HSO4 at room temperature. The yield was up to 99%. This novel method was effective when triethoxymethane was utilized instead of alcohols. Moreover, acidic ionic liquid could be reused easily with no significant degradation of its catalytic activity.     

An Environmentally Benign System for Synthesis of β-Hydroxylketones： L-Histidine Asymmetrically Catalyzed Direct Aldol Reactions in Aqueous Micelle and Water-like Media

The first histidine catalyzed direct aldol reactions of ketones with nitrobenzaldehydes in water and in poly（ethylene glycol） （PEG） were reported. It reveals that histidine is a good aldol catalyst for synthesis of β-hydroxylketones in water and in PEG, giving good to excellent yields of the respective products. Better enantioand regioselectivity were achieved using low molecular weight PEG as the media. The results show that histidine and PEG-200 or -300 may constitute a promising environmentally benign system for asymmetric synthesis of β-hydroxylketones.     

Synthese und thermische Eigenschaften von molekularen Clusterverbindungen zusammengesetzt aus Elementen der Gruppen 11‐13‐16

Syntheses and Thermal Properties of Cluster Molecules, formed from Groups 11‐13‐16 Elements In the presence of PPh₃, CuX (X = Cl, CH₃COO) or AgOC(O)C₆H₅ and GaCl₃ react in THF with S(SiMe₃)₂ or Se(SiMe₃)₂ to yield [Cu₆Ga₈Cl₄S₁₃(PPh₃)₆] ( 1 ), [Cu₆Ga₈Cl₄Se₁₃(PPh₃)₆] ( 2 ), [Ag₆Ga₈Cl₄S₁₃(PPh₃)₆] ( 4 ) and [Ag₆Ga₈Cl₄Se₁₃(PPh₃)₆] ( 5 ). The use of PⁿPr₂Ph instead of PPh₃ and subsequent layering with n‐hexane leads to the formation of the cluster [Cu₆Ga₈Cl₄Se₁₃(PⁿPr₂Ph)₁₂] ( 3a , 3b ). Reaction of CuCl, GaCl₃ and PⁿPr₃ with Se(SiMe₃)₂ in THF results in the crystallisation of the ionic cluster (HPⁿPr₃)₂[Cu₂Ga₄Cl₄Se₆(PⁿPr₃)₄] ( 6 ). The structures of 1 — 6 were determined by X‐ray single crystal structure analysis. Thermogravimetric measurements of the cluster molecules and powder diffraction patterns of the remaining powders reveal the potential use of them as single source precursor compounds for the synthesis of the related ternary solid state materials.     

水热合成CdS纳米晶体的形貌控制研究

研究了水热合成CdS纳米晶体形貌的化学控制，选择不同的络合试剂为模板,研究其对水热合成CdS纳米晶体形貌的影响.实验发现若以络合试剂乙二胺、甲胺为模板时，产品CdS晶体的形貌分别为（20～30） nm×（200～600） nm和（40～50） nm×（200～600） nm尺寸的纳米棒;而以络合试剂吡啶、 氨为模板时，产品CdS晶体的形貌分别为平均尺寸约30 nm和20 nm的纳米颗粒.用XRD、TEM、XPS、PL和Raman光谱等技术对所得CdS纳米棒进行了表征.同时对水热合成CdS纳米晶体形貌的模板控制机制进行了探讨，提出了一种水热合成CdS纳米棒的络合物结构诱导生长机理.     

Cyclic organohydroborate complexes of metallocenes: VIII. Triphenylsiloxy derivatives of Group IV organometallic systems, Cp2M(OSiPh3)X (M=Ti, Zr, Hf; X=Cl, {(μ-H)2BC8H14})

Group IV metallocene triphenylsiloxy chlorides, Cp₂MCl(OSiPh₃) (1, M=Ti; 2, M=Zr; 3, M=Hf), and cyclic organohydroborates, Cp₂M(OSiPh₃){(μ-H)₂BC₈H₁₄} (4, M=Zr; 5, M=Hf), were synthesized and characterized. The new hafnocene chloride derivative 3 was obtained by treating Cp₂HfCl₂ with triphenylsilanol and piperidine. The 18-electron cyclic organohydroborates 4 and 5 were afforded by reacting 2 and 3 with K[H₂BC₈H₁₄], the potassium salt of the 9-BBN dimer. Reaction of 1 with K[H₂BC₈H₁₄] causes reduction of the Ti(IV) center and produces the well-known Ti(III), 17-electron, paramagnetic dimer [Cp₂Ti(μ-Cl)₂TiCp₂] (6). Single-crystal X-ray diffraction structures of 3, 4, 5, and 6 were determined.     

乙二醛双缩(2-羟基苯胺)(GBHA)在稀土离子分析中的应用

利用乙二醛双缩（2－羟基苯胺）（GBHA）对Ln^3 系离子进行分组分析，同时以GBHA为显色剂，用分光光度法分别测定了Ho^3 ,Yb^3 ,Er^3 ,Dy^3 和Tb^3五种离子，其检出限为10^-6mol/L，工作曲线线性范围为10^-5－－10^-3mol/L。     

丙烯酸酯和甲基丙烯酸酯基团转移共聚研究

研究了三种丙烯酸酯分别和四种甲基丙烯酸酯的基团转移共聚，用１Ｈ ＮＭＲ法测定共聚物组成，扩展的Ｋｅｌｅｎ Ｔｕｄｏｓ法测定竞聚率，结果为γＭＡ＝９２３、γＭＭＡ＝００６；γＥＡ＝１４１５、γＭＭＡ＝００１；γＢＡ＝７５１、γＭＭＡ＝００２；γＭＡ＝１４４１、γＥＭＡ＝００１；γＭＡ＝１３９６、γＢＭＡ＝０２３；γＭＡ＝８６６、γｉ ＢＭＡ＝００８，表明基团转移聚合同阴离子聚合有明显的相似之处．     

模板组装Fe纳米线阵列及其微结构

铝在硫酸溶液中经直流阳极氧化,得到多孔铝阳极氧化膜(AAO). 以AAO膜为模板,通过交流电沉积的方法,在AAO模板孔内成功组装了Fe纳米线.TEM分析表明,Fe纳米线的长度约为2.5 μm,其长度分布十分均匀；粗细均匀,直径约为25 nm. XRD实验分析证实,所制备的Fe纳米线为α-Fe.选区电子衍射（SAED）实验分析表明,α-Fe纳米线具有单晶结构.