Pressurized hot water extraction (PHWE)

Pressurized hot water extraction (PHWE) has become a popular green extraction method for different classes of compounds present in numerous kinds of matrices such as environmental, food and botanical samples. PHWE is also used in sample preparation to extract organic contaminants from foodstuff for food safety analysis and soils/sediments for environmental monitoring purposes. The main parameters which influence its extraction efficiency are namely the temperature, extraction time, flow rates and addition of modifiers/additives. Among these different parameters studied, temperature is described as the most important one. It is reported that the extraction of certain compounds is rather dependent on pressurized water with different applied temperature. Thus, the stability and reduced solubilities of certain compounds at elevated temperatures are highlighted in this review. With some modifications, a scaled-up PHWE could extract a higher amount of desirable compounds from solid and powdered samples such as plant and food materials. The PHWE extracts from plants are rich in chemical compounds or metabolites which can be a potential lead for drug discovery or development of disease-resistant food crops.     

A cost effective,sensitive, and environmentally friendly sample preparation method for determination of polycyclic aromatic hydrocarbons in solid samples

A simple, cost effective, and yet sensitive sample preparation technique was investigated for determining Polycyclic Aromatic Hydrocarbons (PAHs) in solid samples. The method comprises ultrasonic extraction, Stir Bar Sorptive Extraction (SBSE), and thermal desorption–gas chromatography–mass spectrometry to increase analytical capacity in laboratories. This method required no clean-up, satisfied PAHs recovery, and significantly advances cost performance over conventional extraction methods, such as Soxhlet and Microwave Assisted Extraction (MAE). This study evaluated three operational parameters for ultrasonic extraction: solvent composition, extraction time, and sample load. A standard material, SRM 1649 a (urban dust), was used as the solid sample matrix, and 12 priority PAHs on the US Environmental Protection Agency (US EPA) list were analyzed. Combination of non-polar and polar solvents ameliorated extraction efficiency. Acetone/hexane mixtures of 2:3 and 1:1 (v/v) gave the most satisfactory results: recoveries ranged from 63.3% to 122%. Single composition solvents (methanol, hexane, and dichloromethane) showed fewer recoveries. Comparing 20 min with 60 min sonication, longer sonication diminished extraction efficiencies in general. Furthermore, sample load became a critical factor in certain solvent systems, particularly MeOH. MAE was also compared to the ultrasonic extraction, and results determined that the 20-min ultrasonic extraction using acetone/hexane (2:3, v/v) was as potent as MAE. The SBSE method using 20 mL of 30% alcohol-fortified solution rendered a limit of detection ranging from 1.7 to 32 ng L⁻¹ and a limit of quantitation ranging from 5.8 to 110 ng L⁻¹ for the 16 US EPA PAHs.     

绿色医院建筑评价体系的研究

绿色医院建筑是将可持续发展理念引入医院建筑领域的结果。近年来我国医院建设进入高潮,急需建立一套完整的绿色医院建筑评价体系,用来有针对性地对中国的医院建设做出科学的指导。重点对美国的医疗建筑绿色指南(GGHC)与能源与环境设计先导(LEED)以及我国《绿色建筑评价标准》与美国LEED进行分析比较,以借鉴国际先进经验,建立一套适合我国国情的绿色医院建筑评价体系。     

低能量系统在时间限制下的同时通讯和处理器频率选择

This paper presents a method to reduce the energy consumption of multi-core systems characterized by processor cores and buses with discrete frequency levels under timing constraints. The proposed method takes the transformations of the original task graphs, which include dependent tasks located in different iterations, as inputs. The proposed method utilizes mapping selection as well as joint processor and communication frequency scaling to implement energy reduction. We conduct experiments on several random task graphs. Experimental results show that the proposed method can achieve substantial energy reduction compared with previous work under the same hard timing constraints.     

Morphological and ultrastructural characterization of the alimentary canal in Japanese wax scale (Ceroplastes japonicus Green)

The morphology and ultrastructure of the alimentary canal in the adult female of the Japanese wax scale, Ceroplastes japonicus Green (Hemiptera: Coccoidea: Coccidae), was investigated using light microscopy, scanning electron microscopy and transmission electron microscopy. The results showed that the foregut was subdivided into a sclerotized pharynx and an oesophagus. A pair of salivary glands attached in the middle of the foregut. The loop-shaped midgut was narrow and longer than the foregut and its inner wall lined with a thick layer of epithelia. The hindgut was divided into a narrower ileum and a broader rectum, with the well-developed filter chamber enclosed in the anterior rectum. Malpighian tubules consisted of two brownish-yellow moniliform tubules with pores, approximately 1 μm in diameter, scattered on the outer surface and many spherical crystals inside the tubules.     

水平层状介质中电磁场并矢Green函数的一种快速新算法

本文利用提取直射波并结合自适应数字滤波等技术提出一种计算水平层状介质中电磁场并矢Green函数的快速算法. 首先将谱域Green函数中表征均匀介质作用的直射波提取出来并对其积分进行解析计算,这种处理降低了谱域Green函数的奇异性,可在很大程度上缩短其积分收敛区间. 然后在将谱域Green函数剩余部分对应积分转化为三个快速下降积分的基础上,引入一种自适应数字滤波算法对其进行快速求解. 最后通过具体算例验证了本文所述算法的有效性. 关键词： 并矢Green函数 快速算法 水平层状介质     

Electronic transport properties of carbon chains between Au and Ag electrodes: A first-principles study

We report first-principles calculations of the current-voltage characteristic and the conductance of carbon-based molecular wires with different length capped with sulfur ends between two metallic electrodes made of different metals. The optimized molecular structure of carbon chain in the junction is presented on the structure of polyyne. The conductance of the polyyne wires shows oscillatory behavior depending on the number of carbon atoms (triple bonds). Current rectification is found and rectification direction presents inversion with the odd and even number of carbon atoms.     

Paradoxical high signal intensity of hepatocellular carcinoma in the hepatobiliary phase of Gd-EOB-DTPA enhanced MRI: initial experience

Purpose

To describe the paradoxical high signal intensity of hepatocellular carcinoma (HCC) in the hepatobiliary phase on gadolinium-ethoxybenzyl-diethylenetriamine pentaacetic acid (Gd-EOB-DTPA)-enhanced magnetic resonance imaging (MRI).

Materials and Methods

A database search was performed to identify cases of HCC that showed unusual prolonged enhancement in the hepatobiliary phase of Gd-EOB-DTPA MRI. All patients received 3.0-T liver MRI including precontrast T1-weighted images, T2-weighted images and a post Gd-EOB-DTPA-enhanced dynamic study. The signal intensity of HCC was measured at pre-enhanced, arterial, portal, delayed and hepatobiliary phase using regions of interest. Radiologic and pathologic correlation was performed for the paradoxically prolonged enhancing portion of HCC in the hepatobiliary phase.

Results

Four patients (all male, age range 44-70; mean 57.5 years) were included in this study. All patients showed HCC lesions that were low signal intensity (SI) on T1-WI, high SI on T2-WI, enhanced in arterial phase, and washed-out in delayed phase. All cases showed paradoxically high SI in hepatobiliary phase, which was unusual for HCC. Pathologically, they were all diagnosed as well-differentiated HCC with prominent cytoplasm and a bile secreting appearance.

Conclusion

HCC may demonstrate the prolonged high signal intensity at the hepatobiliary phase on Gd-EOB-DTPA enhanced MRI. These HCCs tended to be highly differentiated and to have prominent bile secretion.     

Selecting green suppliers based on GSCM practices: Using fuzzy TOPSIS applied to a Brazilian electronics company

Due to an increased awareness and significant environmental pressures from various stakeholders, companies have begun to realize the significance of incorporating green practices into their daily activities. This paper proposes a framework using Fuzzy TOPSIS to select green suppliers for a Brazilian electronics company; our framework is built on the criteria of green supply chain management (GSCM) practices. An empirical analysis is made, and the data are collected from a set of 12 available suppliers. We use a fuzzy TOPSIS approach to rank the suppliers, and the results of the proposed framework are compared with the ranks obtained by both the geometric mean and the graded mean methods of fuzzy TOPSIS methodology. Then a Spearman rank correlation coefficient is used to find the statistical difference between the ranks obtained by the three methods. Finally, a sensitivity analysis has been performed to examine the influence of the preferences given by the decision makers for the chosen GSCM practices on the selection of green suppliers. Results indicate that the four dominant criteria are Commitment of senior management to GSCM; Product designs that reduce, reuse, recycle, or reclaim materials, components, or energy; Compliance with legal environmental requirements and auditing programs; and Product designs that avoid or reduce toxic or hazardous material use.