偏最小二乘法结合傅里叶变换红外漫反射光谱快速测定煤质

发热量、挥发分和灰分等是衡量煤质的质量指标。通常,烟煤的发热量、挥发分和灰分是按行业标准方法[1]分别进行测定的,操作过程繁琐,速度慢,且费用高。随着化学计量学多元校正方法的发展与广泛应用,董庆年采用最小二乘法结合红外光谱成功测定了灰分[2];而应用偏最小二乘法[3](P     

统一的对流扩散型可压缩流体力学方程与解法

流体力学的动量方程、能量方程、湍动能方程和耗散方程都具有对流扩散方程的形式,但连续方程却不是对流扩散型的。对于可压缩问题,本文通过合理的数学推导,不作任何近似、假定与简化,得到一个全新的连续方程形式．该连续方程以压力为未知变量,并具有对流扩散型形式,使得所有的流体动力学方程组都具有完全统一的方程形式,给出了这种三维对流扩散方程组的有限精确差分计算格式。对流体力学的进一步发展具有一定意义．     

基于简单碰撞理论煤粉燃烧动力学模型的研究-PART Ⅲ:氧气可达比表面积

根据不同温度下氧分子平均自由程的大小,比较了小孔、中孔和大孔中三种扩散速率与煤焦表面燃烧速度的大小.研究表明2000 K以内,颗粒表面分子扩散速率比氧化反应速率大1个数量级以上,过度扩散速率不小于氧化速率.温度小于1200K时,燃烧速率比Knudsen扩散速率小1～5个数量级,扩散孔径小于15～28 nm,反应主要在内外表面进行;1200～1600K时,燃烧速率与Knudsen扩散速率相当,扩散临界孔径28～38 nm,反应在外表面及浅层内表面进行;温度1600K以上时,Knudsen扩散速率比燃烧速率小1个数量级,孔径38～50 nm以下内表面上碳的氧化速度受扩散控制.煤焦的氧化主要发生在Knudsen扩散临界孔径10～50 nm以上的氧气可达表面上.     

基于局部加密纯无网格法非线性Cahn-Hilliard方程的模拟

为数值求解描述不同物质间相位分离现象的高阶非线性Cahn-Hilliard(C-H)方程,发展了一种基于局部加密纯无网格有限点集法(local refinement finite pointset method,LR-FPM).其构造过程为:1)将C-H方程中四阶导数降阶为两个二阶导数,连续应用基于Taylor展开和加权最小二乘法的FPM离散空间导数;2)对区域进行局部加密和采用五次样条核函数以提高数值精度;3)局部线性方程组求解中准确施加含高阶导数Neumann边值条件.随后,运用LR-FPM求解有解析解的一维/二维C-H方程,分析粒子均匀分布/非均匀分布以及局部粒子加密情况的误差和收敛阶,展示了LR-FPM较网格类算法在非均匀布点情况下的优点.最后,采用LR-FPM对无解析解的一维/二维C-H方程进行了数值预测,并与有限差分结果相比较.数值结果表明,LR-FPM方法具有较高的数值精度和收敛阶,比有限差分法更易数值实现,能够准确展现不同类型材料间相位分离非线性扩散现象随时间的演化过程.     

An Insight into the Diffusion of Unsaturated Polyester (UP) Resin into Expanded Graphite (EG) to Improve the Mechanical Properties of the UP/EG Composites

Abstract

Polymer/expanded graphite (EG) nanocomposites have great importance in many industrial applications mainly due to their high electrical/thermal conductivity or flame retardancy. However, to fully employ the benefits of polymer/EG nanocomposites one must consider the high degree of porosity of EG. The high degree of porosity of EG can deteriorate the composites’ mechanical properties if the polymer chains cannot diffuse completely into the EG pores. In this article, an insight is given into the diffusion of unsaturated isophthalic polyester (UP) resin, consisting of a combination of maleic anhydride and isophthalic anhydride in the resin backbone, with two viscosities, into the pores of the EG particles of various degrees of porosity. The diffusion experiments were carried out on compressed EG tablets with the same density but different porosity due to the different porosity of the EG particles. The results showed that the diffusion rate of the UP resin with higher viscosity slightly decreased when the EG porosity decreased but, in the opposite way, it strongly increased for the low viscosity UP resin. The EG nanocomposites samples were molded at varying pressures. The micrographs of the fractured surfaces of the EG nanocomposites showed that the EG pores were not filled with resin, thus the EG nanocomposites had residual pores. It was found that composites containing EGs with higher expansion ratio and larger particles and pores showed larger residual pores. Furthermore, the composites prepared with the more viscous UP resin showed more residual pores. By applying a pressure of 10?bar instead of 1?bar, a reduction of 7–20% in the residual pores of the nanocomposites was observed which led to improved mechanical properties by up to 20% in flexural strength for the EG with the highest expansion ratio.     

基于Retinex理论与概率非局部均值的红外图像增强方法

针对传统红外图像增强算法中细节模糊及过度增强的问题,提出了一种基于Retinex理论与概率非局部均值相结合的红外图像增强方法.首先通过单尺度Retinex方法调整图像中过暗与过亮部分的灰度级;然后利用概率非局部均值对图像进行分解处理得到基本层与细节层,对基本层采用直方图均衡化拉伸对比度,对细节层采用非线性函数进行增强;最后,将不同层次的结果融合得到对比度与细节增强的红外图像.用该方法对多组不同场景的红外图像进行仿真实验,并将其与多种增强方法进行主、客观对比分析,结果表明所提方法在红外图像的细节及对比度增强方面都获得了更好的效果.     

A Continuous-Time Random Walk Extension of the Gillis Model

We consider a continuous-time random walk which is the generalization, by means of the introduction of waiting periods on sites, of the one-dimensional non-homogeneous random walk with a position-dependent drift known in the mathematical literature as Gillis random walk. This modified stochastic process allows to significantly change local, non-local and transport properties in the presence of heavy-tailed waiting-time distributions lacking the first moment: we provide here exact results concerning hitting times, first-time events, survival probabilities, occupation times, the moments spectrum and the statistics of records. Specifically, normal diffusion gives way to subdiffusion and we are witnessing the breaking of ergodicity. Furthermore we also test our theoretical predictions with numerical simulations.     

正火和回火处理过程中W/Fe/RAFM钢接头W/Fe界面组织和剪切性能的演化

对热等静压(HIP)扩散焊制备的W/Fe/RAFM钢接头进行了正火和回火处理,以恢复其中RAFM钢的组织和性能.采用电子探针微分析器(EPMA)和掠入射X射线衍射(GIXRD)对W/Fe界面组织的演化进行了分析,采用剪切测试和扫描电镜(SEM)对接头连接性能的演化进行了测试和分析.结果表明,正火处理后,RAFM钢中的C...     

ATR-FTIR光谱技术在聚合物膜研究中的应用

红外光谱是聚合物研究中常用的一种表征手段,而衰减全反射红外光谱（ATR-FTIR）更是由于在研究聚合物薄膜方面具有显著的优势而被广泛使用。逐层组装（layer-by-layer Assembly）技术是一种常用的组装聚合物超薄膜的方法,ATR-FTIR光谱技术的引入可以在获取膜组装过程中相应信息的同时有效地避免表征过程中对样品的损害。另一方面,ATR-FTIR方法与二维相关光谱技术（two-dimensional correlation spectroscopy, 2D correlation spectroscopy）相结合也是研究小分子（主要是水分子）在聚合物薄膜中的渗透行为的有效手段。本文对ATR-FTIR的基本原理和显著特点作了介绍,并以实例阐述该方法在逐层组装技术和水分子在薄膜内渗透行为研究两方面的应用。