Nondestructive Monitoring of Sucrose Diffusion in Oil-in-Water Emulsions by Ultrasonic Velocity Profiling

The diffusion of sucrose through an optically opaque oil-in-water emulsion was monitored nondestructively by measuring the ultrasonic velocity as a function of height. Initially, a corn oil-in-water emulsion (0, 5, 10, 15, or 20 wt% oil) stabilized by Tween 20 (1 wt%) and xanthan (1 wt%) was placed in a measurement cell at 30°C. A 20 wt% sucrose solution containing the same concentration of Tween 20 and xanthan as the aqueous phase in the emulsion was placed on top of the emulsion. The ultrasonic velocity of this two-layer system was measured as a function of sample height and time and then converted into sucrose and oil concentration–distance profiles using empirical calibration curves. The translational diffusion coefficient of the sucrose in the upper and lower layers was determined by fitting the experimental data to a Fickian diffusion model. The measured diffusion coefficients of the sucrose molecules decreased as the droplet concentration in the emulsion increased, indicating retardation of the sugar molecule movement. Ultrasonic profiling was also used to monitor the compression of the emulsion due to movement of water molecules into the upper layer.     

Diffusion in aqueous copper sulfate and copper sulfate-sulfuric acid solutions

Diffusion coefficients of copper sulfate-water and copper sulfate-sulfuric acid-water solutions have been determined at 25°C using conductimetric and diaphragm-cell techniques. The ternary diffusion measurements indicate that diffusion of sulfuric acid can produce large counterflows of copper sulfate and vice versa. If diffusion of copper sulfate in aqueous sulfuric acid solutions is treated as a binary process, the measured apparent diffusivities of copper sulfate can be 1 to 8% lower than the salt's true diffusivity. Equations are developed to predict transport coefficients from the concentrations and mobilities of the diffusing species.     

Rapidly converging lattice sums for nonelectrostatic interactions

The relative energies of one-, two-, and three-dimensional Bravais lattice Lennard-Jones particles can be calculated by lattice sums. The expression of lattice sums over a Lennard-Jones potential can be manipulated into a form that converges rapidly. A formalism capable of calculating the lattice potential at arbitrary points of a completely general lattice has been developed. This method provides an alternative way to calculate the relative energies from the surface and the interior bulk sites of many chemical systems. The method is illustrated with application to hcp and fcc Lennard-Jonesium, both for the relative binding energy and for calculating the potential along the geometric diffusion pathway between tetrahedral and octahedral interstitial sites. Diffusion from the tetrahedral site to the octahedral site experiences a barrier of 752.600 in units of 4 epsilon. The reverse pathway experiences a barrier of 1035.614 in units of 4 epsilon.     

Diffusion and interdiffusion in Zn-disordered AlAs-GaAs superlattices

Several superlattices (SL's) with different layer thicknesses, grown by molecular beam epitaxy (MBE), were disordered via low temperature (550?600°C) Zn diffusions to investigate layer thickness effects on both the Zn diffusion process and the Al-Ga interdiffusion process. The Zn diffusion coefficients were measured using secondary ion mass spectroscopy (SIMS) and Auger electron spectroscopy (AES) and found to be ?10^?12 cm²/sec, increasing somewhat with decreasing layer thickness. The activation energy for the Zn diffusion process ranged from 3.1 eV for an 1100Å/period SL to 2.1 eV for a 320Å/period SL. The Al-Ga interdiffusion coefficient and the activation energy associated with the interdiffusion process were calculated from AES depth profiles. The coefficient is on the order of 10^?16 cm²/sec and the activation energy is approximately 1 eV, independent of the SL layer thickness.     

Unusual features of micellar diffusion

Diffusion coefficients of tetradecyltrimethylammonium bromide in aqueous solutions have been determined at 25, 95 and 135 °C using the Taylor dispersion technique. The diffusion coefficient exhibits a minimum at a surfactant concentration above the critical micelle concentration (CMC). The results are interpreted in terms of electrostatic coupling and rapid exchange between micelle, surfactant monomer and counterions.     

FT合成沉淀Fe／Cu／K催化剂有效因子的计算Ⅰ．工业颗粒催化剂有效因子的计算

用包括水抑制作用的动力学方程，根据建立的反应扩散模型和ＦＴ合成化学计量关系，计算了工业原颗粒ＦＴ合成沉淀Ｆｅ／Ｃｕ／Ｋ催化剂在工业操作条件下的有效因子。根据不同的产物组成，建立了三种化学计量关系式，比较了气相反应和气液反应的有效因子，确立了ＦＴ合成沉淀Ｆｅ／Ｃｕ／Ｋ催化剂有效因子的计算方法。在ＦＴ合成反应条件下，产物蜡充满了催化剂的微孔，各组分在蜡中的扩散系数要比纯气相中的扩散系数小得多。在工况操作条件下（５２３Ｋ，２．５ＭＰａ，５００ｈ￣（－１），尾气循环比３．０），工业原颗粒（ｄ＿ｐ＝２．５ｍｍ，ｌ＿ｐ＝５～１０ｍｍ）催化剂的实际有效因子是纯气相反应的一半左右，计算的平均有效因子分别为０．４０和０．４２。     

Binding site optimisation for artificial enzymes by diffusion NMR of small molecules

A binding site optimisation protocol for the design of artificial enzymes based on "small molecule-small molecule" binding studies by diffusion NMR is presented. Since the reaction chosen was the hydrolysis of ester 1 ([4-(4-carboxy-1-oxobutyl)-aminobenzyl]-phenethyl ester), an analogous phosphonate ester 2 ([4-(4-carboxy-1-oxobutyl)-aminobenzyl]-phosphonic phenethyl ester) was selected as a suitable transition state analogue (TSA). The key objective of the NMR studies was to find a unit with functional groups capable of binding to the acidic sites of the TSA. Nine dipeptides, mainly with basic and hydroxyl groups, were used and their affinity to the TSA was studied by measuring the change in the diffusion coefficient, D(pep), upon binding by pulse field gradient NMR. The value of D(pep) at 298 K in D(2)O at pD 5, 7 and 10 was measured both in free solution, and mixtures containing one dipeptide and the TSA. As both components are low molecular weight species with M < 500, a TSA-to-dipeptide ratio of 10:1 was used to detect significant changes in D(pep). The results revealed that dipeptides with basic residues show higher affinity to the TSA than those with hydroxyl or aliphatic side chains in aqueous solutions. The dipeptide showing the most significant relative change in D(pep) was H-Arg-Arg-OH, and the binding constant was estimated to be 86 L M(-1) by measuring D(pep) at varying concentrations of the TSA. In addition, binding of the TSA to a new water-soluble polymer with a polyallylamine backbone and randomly distributed Arg-Arg binding sites was examined, and the binding constant was estimated to be > or =1500 L M(-1). As confirmed by further catalytic activity tests, polymers containing Arg-Arg as a binding site are capable of significant rate accelerations in the hydrolysis of ester 1.     

An Analytical Study of Molecular Transport in a Zeolite Crystallite Bed

Analytical solutions of the diffusion equations to obtain the diffusant concentrations in the macro- and micropores which constitute the pore system of a zeolite bed are presented. The parameter which determines the influence of each pore type on the evolution of the adsorbate/adsorbant system towards the equilibrium state is described. Examples are given to illustrate a qualitative and quantitative study based on the curves obtained from these equations.     

Hydrogel networks of poly(ethylene oxide) star-molecules supported by expanded polytetrafluoroethylene membranes: characterization, biocompatibility evaluation and glucose diffusion characteristics

The present work discusses the grafting by electron beam irradiation of poly(ethylene oxide) (PEO) star-shaped polymers onto porous expanded polytetrafluoroethylene (EXPTFE) surfaces. The resulting materials are intended to combine the good biocompatible properties of PEO with the outstanding mechanical properties of PTFE. The star-shaped PEOs were synthesized via anionic polymerization. 3 Mev electron beam irradiation was applied to graft these PEO stars onto porous EXPTFE surfaces. The hydrophobic EXPTFE surface had to be pre-modified with N-vinylpyrrolidone. ESCA was used to quantify the amount of grafted star-shaped PEO. Unmodified EXPTFE surfaces are well known, when implanted in a body, to be rapidly covered by a layer of cells and fibrin. The EXPTFE coated with PEO were implanted in the peritoneal cavity of rats (or under the back skin). This implantation did not induce any inflammation reactions and SEM analysis had attested the absence of adsorbed cells and fibrin. The glucose diffusion properties of these membranes were studied by a lag time analysis method and compared to those of pure PEO hydrogels. As expected, glucose diffuses through the hydrogel coated membrane and diffusion is not affected by the presence of the EXPTFE membrane.