A High-Order Finite Difference Scheme for 3D Unsteady Convection Diffusion Reaction Equations北大核心CSCD

针对三维非稳态对流扩散反应方程,构造了一种高精度紧致有限差分格式,对空间的离散采用四阶紧致差分方法,对时间的离散采用Taylor级数展开和余项修正技术,所提格式在时间上的精度为二阶、在空间上的精度为四阶。利用Fourier稳定性分析法证明了该格式是无条件稳定的。最后给出数值算例验证了理论结果。     

几乎各向同性的高维空间分数阶扩散方程的分块快速正则Hermite分裂预处理方法

一类空间分数阶扩散方程经过有限差分离散后所得到的离散线性方程组的系数矩阵是两个对角矩阵与Toeplitz型矩阵的乘积之和.在本文中,对于几乎各向同性的二维或三维空间分数阶扩散方程的离散线性方程组,采用预处理Krylov子空间迭代方法,我们利用其系数矩阵的特殊结构和具体性质构造了一类分块快速正则Hermite分裂预处理子.通过理论分析,我们证明了所对应的预处理矩阵的特征值大部分都聚集于1的附近.数值实验也表明,这类分块快速正则Hermite分裂预处理子可以明显地加快广义极小残量(GMRES)方法和稳定化的双共轭梯度(BiCGSTAB)方法等Krylov子空间迭代方法的收敛速度.     

Qualitative properties of pulsating fronts for reaction–advection–diffusion equations in periodic excitable media

In this paper, we study the pulsating fronts of reaction–advection-diffusion equations with two types of nonlinear term in periodic excitable media. Firstly, for the case with combustion nonlinearity, the unique front is proved to decay exponentially when it approaches the unstable limiting state. Secondly, for the degenerate monostable type nonlinearity, it is shown that the front with critical speed is unique, monotone and decays exponentially at negative end, while the fronts of noncritical speeds decay to zero non-exponentially.     

Leray–Hopf solutions to a viscoelastoplastic fluid model with nonsmooth stress–strain relation

We consider a fluid model including viscoelastic and viscoplastic effects. The state is given by the fluid velocity and an internal stress tensor that is transported along the flow with the Zaremba–Jaumann derivative. Moreover, the stress tensor obeys a nonlinear and nonsmooth dissipation law as well as stress diffusion. We prove the existence of global-in-time weak solutions satisfying an energy inequality under general Dirichlet conditions for the velocity field and Neumann conditions for the stress tensor.     

Efficient simulation of general stochastic hybrid systems

General Stochastic Hybrid System (SHS) are characterised by Stochastic Differential Equations (SDEs) with discontinuities and Poisson jump processes. SHS are useful in model based design of Cyber-Physical System (CPS) controllers under uncertainty. Industry standard model based design tools such as Simulink/Stateflow® are inefficient when simulating, testing, and validating SHS, because of dependence on fixed-step Euler–Maruyama (EM) integration and discontinuity detection. We present a novel efficient adaptive step-size simulation/integration technique for general SHSs modelled as a network of Stochastic Hybrid Automatons (SHAs). We propose a simulation algorithm where each SHA in the network executes synchronously with the other, at an integration step-size computed using adaptive step-size integration. Ito’ multi-dimensional lemma and the inverse sampling theorem are leveraged to compute the integration step-size by making the SDEs and Poisson jump rate integration dependent upon discontinuities. Existence and convergence analysis along with experimental results show that the proposed technique is substantially faster than Simulink/Stateflow®when simulating general SHSs.     

Spectra of graphs and fractal dimensions II

This paper continues the study of exponentsd(x), d (x), d _R (x) andd (x) for graphG; and the nearest neighbor random walk {X _n } _nN onG, if the starting pointX ₀=x is fixed. These exponents are responsible for the geometric, resistance, diffusion and spectral properties of the graph. The main concern of this paper is the relation of these exponents to the spectral density of the transition matrix. A series of new exponentse, e ,e _R ,e are introduced by allowingx to vary along the vertices. The results suggest that the geometric and resistance properties of the graph are responsible for the diffusion speed on the graph.     

New results for diffusion in Lorentz lattice gas cellular automata

New calculations to over ten million time steps have revealed a more complex diffusive behavior than previously reported of a point particle on a square and triangular lattice randomly occupied by mirror or rotator scatterers. For the square lattice fully occupied by mirrors where extended closed particle orbits occur, anomalous diffusion was still found. However, for a not fully occupied lattice the superdiffusion, first noticed by Owczarek and Prellberg for a particular concentration, obtains for all concentrations. For the square lattice occupied by rotators and the triangular lattice occupied by mirrors or rotators, an absence of diffusion (trapping) was found for all concentrations, except on critical lines, where anomalous diffusion (extended closed orbits) occurs and hyperscaling holds for all closed orbits withuniversal exponentsd _f =7/4 and =15/7. Only one point on these critical lines can be related to a corresponding percolation problem. The questions arise therefore whether the other critical points can be mapped onto a new percolation-like problem and of the dynamical significance of hyperscaling.     

Diffusion on the torus for Hamiltonian maps

For a mapping of the torusT ² we propose a definition of the diffusion coefficientD suggested by the solution of the diffusion equation ofT ². The definition ofD, based on the limit of moments of the invariant measure, depends on the set where an initial uniform distribution is assigned. For the algebraic automorphism of the torus the limit is proved to exist and to have the same value for almost all initial sets in the subfamily of parallelograms. Numerical results show that it has the same value for arbitrary polygons and for arbitrary moments.     

Evidence for Glass–glass Interfaces in a Columnar Cu–Zr Nanoglass

Comprehensive analyses of the atomic structure using advanced analytical transmission electron microscopy-based methods combined with atom probe tomography confirm the presence of distinct glass–glass interfaces in a columnar Cu-Zr nanoglass synthesized by magnetron sputtering. These analyses provide first-time in-depth characterization of sputtered film nanoglasses and indicate that glass–glass interfaces indeed present an amorphous phase with reduced mass density as compared to the neighboring amorphous regions. Moreover, dedicated analyses of the diffusion kinetics by time-of-flight secondary ion mass spectroscopy (ToF SIMS) prove significantly enhanced diffusivity, suggesting fast transport along the low density glass–glass interfaces. The present results further indicate that sputter deposition is a feasible technique for reliable production of nanoglasses and that some of the concepts proposed for this new class of glassy materials are applicable.     

Biomimetic Aerogel for Moisture-Induced Energy Harvesting and Self-Powered Electronic Skin

Moisture–electric generator (MEG)-based blue energy is widely studied. There is still a significant challenge in improving the power of the MEGs system and expanding its application in self-powered electronic skin. Inspired by the structure of ferns, a biomimetic moisture–electric aerogel is designed to collect energy. Polyvinyl alcohol dendritic colloids act as “roots” and “stems” to provide support and channels to transport water molecules. Meanwhile, “leaf-like” graphene oxide sheets generate electricity through direct interaction with water. Besides, based on the above biomimetic structure, this work further enhances the output performance of MEGs by increasing the specific surface area (120.4 m² g⁻¹) and introducing an ultra-high ion density gradient (from −35 to +37 mV). Meanwhile, due to the excellent water absorption, the MEGs show good salt resistance and cyclic stability. By constructing unique biomimetic structures, ultra-high ion density gradient, and regulating environmental conditions, a high-performance MEG is obtained, including ultra-high open-circuit voltage (1.9 V) and short-circuit current (82.5 µA), the industry-leading power density among MEGs with continuous output is reported in the literature (22.55 µW cm⁻²). Besides, the MEGs can accurately respond to environmental and pressure changes, showing its application potential in self-powered electronic skin.