高动态GPS信号模拟器的研究与硬件设计

高动态GPS卫星信号模拟器根据载体的动态环境,精确产生载体收到的GPS卫星信号。文中针对机载GPS接收机的高动态环境建立了多通道GPS信号模拟器的数学模型,并用systemview软件验证了系统设计的可行性。并提出了GPS信号产生器的硬件实现方法。     

基于白光LED照明光源的室内VLC系统

LED照明与可见光通信技术相结合,构建出基于LED可见光无线通信系统。对室内VLC(Visible Light Communication)系统的白光LED光源特性和系统信道模型分析,提出照明光源布局设计与接收光功率分布的关系;对强度调制直接检测方式的室内VLC系统中信噪比和多径效应引起的码间串扰分析,提出采用光分集接收技术克服码间串扰和提高信噪比,并给出光检测器阵列布局的模型。建立VLC系统仿真模型,给出OOK-NRZ (On-Off Keying & Non-Return Zero)和OOK-RZ(On-Off Keying & Return Zero)调制方式的误码率和均方根时延扩展之间的关系曲线。仿真结果表明,接收光功率相同时,均方根时延扩展时间大于1.0 ns时,OOK-RZ特性优于OOK-NRZ。     

ICF中子发射时间诊断

对ICF中子发射时间的诊断技术进行了研究,研制了基于快闪烁体和微通道板式光电倍增管的中子发射时间探测器。在某大型激光原型装置上进行了中子发射时间的实验测量,成功获得多发实验的中子发射时间与打靶激光脉冲的时间及中子发射时间之间的关系。实验结果表明：中子发射时间探测器对DT中子和DD中子都能够响应,中子产额测量下限达到107,时间测量不确定度小于20 ps;CH烧蚀层越厚,中子发射时间越长。     

负载回路电感对低阻抗脉冲形成线输出波形的影响

介绍了一个基于带状脉冲形成线的低阻抗实验平台,针对该平台设计了两种不同类型结构的匹配负载,并分别进行了实验研究,得到了不同的输出脉冲波形,发现轨道结构的水负载具有很低的负载回路电感,适于作为低阻抗脉冲形成线的匹配负载。实验结果表明：在开关电感一定的情况下,负载回路电感是影响低阻抗形成线输出波形的决定性因素。对于0.5 Ω的带状脉冲形成线,只有将负载回路电感控制在30 nH以内,才能获得波形较好的输出脉冲,高压实验结果也验证了此结论。利用数值模拟的方法,分析了负载回路电感对不同阻抗形成线输出波形的影响,结果表明：随着形成线阻抗的增加,负载回路电感对波形的影响越来越小。     

Conventional processes and membrane technology for carbon dioxide removal from natural gas:A review

Membrane technology is becoming more important for CO 2 separation from natural gas in the new era due to its process simplicity,relative ease of operation and control,compact,and easy to scale up as compared with conventional processes.Conventional processes such as absorption and adsorption for CO 2 separation from natural gas are generally more energy demanding and costly for both operation and maintenance.Polymeric membranes are the current commercial membranes used for CO 2 separation from natural gas.However,polymeric membranes possess drawbacks such as low permeability and selectivity,plasticization at high temperatures,as well as insufficient thermal and chemical stability.The shortcomings of commercial polymeric membranes have motivated researchers to opt for other alternatives,especially inorganic membranes due to their higher thermal stability,good chemical resistance to solvents,high mechanical strength and long lifetime.Surface modifications can be utilized in inorganic membranes to further enhance the selectivity,permeability or catalytic activities of the membrane.This paper is to provide a comprehensive review on gas separation,comparing membrane technology with other conventional methods of recovering CO 2 from natural gas,challenges of current commercial polymeric membranes and inorganic membranes for CO 2 removal and membrane surface modification for improved selectivity.     

Off-Line and On-Line Preconcentration Techniques for the Determination of Phenylureas in Freshwaters

Abstract

Phenylurea herbicides are analysed by reversed-phase liquid chromatography using UV detection at 244 nm after a concentration step in order to determine ppb or sub-ppb levels in drinking and river waters. With an average UV detection limit of 5 ng, a 500 ml sample volume is necessary to reach the 10 ppt level for spiked LC grade water samples and enables easy determination of concentrations below the ppb level for river water samples. Off-line and on-line methods are compared for the concentration step. Off-line concentration consists in a liquid sorption on n-octadecyl silica (C18) and elution by a suitable organic solvent. Polar phenylureas have low retention volumes on C18 silica and consequently the length of the concentration column has to be 10 cm to concentrate them at the ppb level from 100 ml of water and longer for lower levels of detection. Nevertheless, we show that increasing the size of the concentration column does not improve the limits of detection because of the numerous interferences also concentrated when percolating high volumes of water. On-line technology can be used only with short precolumns and requires a sorbent with a great retention for phenylureas. The copolymer-based PRP-1 is found to be an excellent sorbent and it is then possible to apply on-line precolumn technology with preconcentration through two precolumns (10 × 21 mm ID) in series, the first one being packed with C18 silica and the other with the PRP-1 polymer. Interfering compounds are then trapped onto the first precolumn acting as a filter and common phenylurea-breakthrough volumes on the PRP-1 precolumn are higher than 500 ml. Knowing the amounts preconcentrated on both precolumns and using UV and electrochemical detection help the identification of phenylureas in river water.     

Radial sample load distribution under overload conditions: Analytical scale columns

The homogeneity of the sample load across the radial cross section of analytical scale columns was determined when operating under overload conditions. The study was performed using active flow technology columns operating in parallel segmentation mode. The outlet segmentation ratio was varied to enable different volume fractions of mobile phase, and thus sample, to elute from the peripheral and central flow regions of the column. The amount of solute exiting the peripheral and radial central exit ports was determined as a function of the flow segmentation ratio. The experimental data using an analytical scale column with dimensions, 100?×?4.6?mm, indicated that the sample load distribution was essentially uniform as a function of the column radial cross section.     

A 10-MHz SOI-Based Face Shear Square Micromechanical Resonator

A 10-MHz face shear (FS) square micromechanical resonator based on silicon-on-insulator (SOI) technology is presented in this paper. In order to examine the improvement of quality factor as well as motional resistance Rx in this structure, the center-stem anchor is employed in this study. The benefit of anchoring the square in the center, which is the nodal point, is that the energy losses through the anchor can be minimized. Hence, a quality factor value of 2.0 million and the motional resistance of 8.2 kΩ can be obtained with an FS mode resonator via finite element (FE) simulation. The results show the significance of the FS mode in this design, not only in its structure but also in its square-extensional mode and Lame-mode. Additionally, an SOI-based fabrication process is proposed to support the design.     

基于JC-5600ATE的单/双电源运算放大器测试方法

集成运算放大器具有成本低、功能多等优点,可广泛用于自动控制系统、测量仪表等其他电子设备中。近年来集成运放的指标在不断提高,性能也在不断提升,伴随着运算放大器的发展,对用来考核运算放大器指标的测试技术也提出了相应的要求,对测试系统(Automatic Testing Equipment,以下简称ATE)的性能要求也相应变高。阐述了单、双电源集成运算放大器在JC-5600ATE上的测试方法,并分析了两者的测试差异。     

基于集成运放的太阳能控制器

现有光伏系统的控制器普遍选用微控制器为核心,为使之与电子技术课程教学案例开发相结合,提出采用集成运放替代微控制器的智能太阳能控制器方案,并以直流12V/10A小功率应用为研究实例。实验结果表明该控制器方案可行,且电路简单、成本低廉,适用于实验教学与课程设计。