光纤传感器的标定曲线拟合与误差分析

本文介绍了一种求取实际光纤传感器标定曲线及函数的有效方法。以压电式光纤电压传感器实测数据为例，详细患解出了其标定函数和曲线，并进行了误差分析。     

Magnesium optical one-shot sensor based on a coumarin chromoionophore

The characterization of a new irreversible optical absorption-based one-shot sensor for magnesium is described. The magnesium photoactive probe is 7-diethylamino-3-(3,4-ethylendioxybenzoyl)coumarin immobilized in a plasticized polymeric membrane. The magnesium selectivity can be explained in terms of size and charge density of magnesium and charge-separated resonance forms contribution in the excited state of coumarin. The selectivity obtained for magnesium over a variety of naturally occurring species in natural waters meets the requirements for the determination of this ion in water. The one-shot sensor responds between 0.14 and 14mgL(-1) with a sensor-to-sensor reproducibility of 1.3% as [Formula: see text] , at the medium level of the range. The performance of the optical one-shot sensor was tested in the analysis of magnesium in different types of natural waters and soft drinks validating results against a reference procedure.     

基于FPGA的脉冲电源及其控制系统设计

针对等离子体特定领域的应用需求,研制了一种基于上位机监控且具有手动/自动控制功能的脉冲电源。详细介绍了脉冲电源主电路、检测电路、驱动电路、数字脉宽调制（DPWM）产生模块以及脉冲变压器的设计方法。该电源采用现场可编程门阵列（FPGA）作为主控芯片,产生DPWM信号及继电器控制信号,经驱动电路放大后驱动逆变全桥及继电器。设计了过温和短路保护电路,通过DS18B20温度传感器和QBC10PS5霍尔电流传感器对电源模块的工作温度和电流进行实时采样。实际应用测试表明,该电源满足设计指标要求。     

新型MSIS结构气敏电容的研究

采用静电喷雾高温分解工艺制备ＳｎＯ２气敏膜，并与Ｓｉ３Ｎ４－ＳｉＯ２集成多层介质膜，用催化金属Ｐｔ作栅电极，制成新型的ＭＳＩＳ结构气敏电容。通过检测平带电压的变化，研究对Ｈ２和Ｏ２的气敏特性，分析其气敏机理并提出了检测的物理模型．     

交叉响应传感器鉴别β受体激动剂及其混合体系

开发了一种鉴别β受体激动剂的新型阵列传感器。该传感器由8种传感物质构成,使用96孔板酶标仪采集响应数据,结合主成分分析(PCA)、分层聚类分析(HCA)、判别分析(LDA)等模式识别方法进行数据处理,对5类β受体激动剂及其混合物进行检测。PCA结果表明,该传感器主要是基于空间结构以及氢键作用实现对β受体激动剂的识别;HCA结果显示,93个分析样本归类正确;LDA结果显示,该传感器对于β受体激动剂识别的准确率达98.9%。本方法在β受体激动剂的检测中有潜在应用价值。     

腐蚀介质中混凝土/钢筋界面电极电位分布的立体分析

由于混凝土的隔离和高绝缘性 ,常规的电化学技术、微探针扫描技术均难于获得在腐蚀介质的浸泡下混凝土 /钢筋界面 ,特别是不同深处的混凝土 /钢筋界面的电位分布 .本文提出用阵列电极法并结合电子技术和微机控制技术 ,获得同一水平面上混凝土 /钢筋界面以及不同深处的混凝土 /钢筋界面的电位分布立体信息图 .结果表明 :在NaCl介质中经过一段时间的浸泡 ,混凝土中的钢筋腐蚀可发生并发展 ;而在Na2 SO4 介质中经过一段时间的浸泡 ,虽钢筋腐蚀一般不发生 ,但混凝土可能破坏 .不同深处混凝土 /钢筋界面腐蚀优先发生在混凝土覆盖较浅的部位 .     

Micro Solid‐Contact Ion‐Selective Electrode Using a Carbon Nanotube Tower as Ion‐to‐Electron Transducer and Conductive Substrate

Solid contact (SC) ion‐selective electrodes (ISEs) have been recognized as the next generation of ISEs. In this work, the electrical conductivity and mechanical strength of a carbon nanotube (CNT) tower enable it to play the dual roles of transducer and substrate for micro SC‐ISEs. The electrode had a close to Nernstian slope of 35 mV/decade a_Ca2+, a linear range of four orders of magnitude of calcium ion activity (10^?5.6 to 10^?1.8 M), and a detection limit of 1.6×10^?6 M. The simplified fabrication by a one‐step drop casting makes miniaturizing SC‐ISEs and fabricating sensor arrays easier to achieve.     

Fluorescent sensor array in a microfluidic chip

Miniaturization and automation are highly important issues for the development of high-throughput processes. The area of micro total analysis systems (muTAS) is growing rapidly and the design of new schemes which are suitable for miniaturized analytical devices is of great importance. In this paper we report the immobilization of self-assembled monolayers (SAMs) with metal ion sensing properties, on the walls of glass microchannels. The parallel combinatorial synthesis of sensing SAMs in individually addressable microchannels towards the generation of optical sensor arrays and sensing chips has been developed. [figure: see text] The advantages of microfluidic devices, surface chemistry, parallel synthesis, and combinatorial approaches have been merged to integrate a fluorescent chemical sensor array in a microfluidic chip. Specifically, five different fluorescent self-assembled monolayers have been created on the internal walls of glass microchannels confined in a microfluidic chip.