采用氮气氛保护的再流焊接技术

叙述了先进再流焊接技术的新发展,描述了提高BGA再流焊接效果的工艺要点,优化倒装芯片再流焊接和固化的新方法。最后,讲述了先进的降低氮消耗量的方法即:通过最大限度地提高潜在收益,以促进再流焊接技术的发展,以此来满足装配厂商的需要。     

Fiber Optical Bragg Grating Refractometer

We have demonstrated an evanescent field refractive indexfiber sensor comprising a 42-mm Bragg grating in an etched fiber together with a tunable Distributed Bragg Reflector (DBR) laser. Characterization of different aqueous sucrose solutions resulted in a resolution of roughly 10 mM sucrose. The sensor in the presented form has a theoretical sensitivity of higher than 10 5 refractive index unit (riu) in a refractive index region close to the cladding index of the fiber. However, the technique allows for an even higher sensitivity than 10 6 riu with a proper signal processing scheme.     

10W QCW operation of a proton implanted GaAlAs diode laser array

We report one thick layer of hard-baked photoresist mask.The laser array stripe pattern was defined by standard wet lithography.With this mask, a 10 W QCW(quasi-continuous wave) operation of a narrow proton implanted multiple stripe conventional single quantum well separate confinement heterostructure(SQW-SCH) GaAlAs diode laser array has been realized.These devices exhibit the lateral far-field radiation pattern of a phase-locked array of gain-guided semiconductor injection laser array. The twenty stripe laser array has a lateral far-field beam divergence full width at half maximum (FWHM) of less than 3°, and three twenty stripe laser array has a beam divergence in the plane of the junction of about 9°.     

纳米晶La_（1－_x）Sr_xFeO_3的合成及气敏特性的研究

用柠檬酸盐法合成出Ｌａ_（１－_ｘ）Ｓｒ_ｘＦｅＯ_３（ｘ＝０．１，０．２，０．３，０．４）原粉，再经固相反应得到纳米晶粉末，用ＴＧ、ＤＴＡ、ＸＲＤ、ＩＲ进行了表征，确证复合氧化物Ｌａ_（１－_ｘ）Ｓｒ_ｘＦｅＯ_３为钙钛矿型结构，粒径在１０～２５ｎｍ之间。实验结果表明，随着固相反应条件不同，产物粒径呈规律性变化．气敏特性研究表明，该纳米晶材料对乙醇有较高的选择性和灵敏度，其选择性顺序为Ｌａ_（０．９）Ｓｒ_（０．１）ＦｅＯ_３＞ＬａＦｅＯ_３＞ＬａＦｅＯ_３（大晶粒）。     

256元线阵PtSi SB-IRCCD热成像技术研究

本文简述了256元线阵PtSi肖特基势垒红外电荷耦合器件(以下简称SB-IRCCD)的基本工作原理,介绍了IRCCD热成像总体方案及该线阵图像传感器热成像系统的设计。系统设计采用了微机技术,利用Z80—CPU作为摄像机控制处理核心,配合专门的图像帧存贮器来进行图像处理,补偿器件均匀性,抑制固定图像噪声(FPN)及提高信噪比(S/N),降低最小可分辨温差。摄像机系统采用慢存快读的方式,实现显示标准化,与标准电视制式兼容,便于直接与标准视频记录,处理或分析设备接口。最后介绍模拟红外热成像实验情况。     

基于FPGA的短波红外图像灰度级拉伸算法实现

为了增强短波红外成像仪的成像对比度,提高目标的识别率,介绍了一种基于现场可编程门阵列(FPGA)的灰度拉伸算法的实现方法。利用视频数据两帧之间灰度分布近似的特性,通过统计上一帧图像的灰度分布,计算图像拉伸所需要的参数,处理当前帧的图像,达到实时处理的效果。在灰度统计模块中,利用FPGA的片上块随机存储器(Block RAM)资源,采用非倍频的流水线数字逻辑设计,避免了跨时钟域的操作,降低了系统状态机的复杂度,提高了系统的工作频率。采用国产320×256元InGaAs面阵探测器,搭载了Xilinx Artix-7系列芯片的实验平台进行实验,仿真结果表明,该方法能有效提高短波红外图像的对比度,具有占用资源少、运算速度快、成本低、可移植性高等优点,满足短波红外成像仪实时灰度拉伸处理的设计要求。     

Large-scale synthesis of tube-like ZnS and cable-like ZnS-ZnO arrays: Preparation through the sulfuration conversion from ZnO arrays via a simple chemical solution route

Arrayed structures are desirable for many applications, but the fabrication of many material arrays remains a significant challenge. As a prominent II-VI semiconductor, large-scale arrayed ZnS structure has not been easily fabricated. Here, we introduce a simple structure conversion route for the synthesis of novel arrayed structures, and large-scale tube-like ZnS structure arrays and cable-like ZnS-ZnO composite arrays were successfully prepared through sulfuration conversion from arrayed rod-like ZnO structure based on a hydrothermal method at low temperature. XRD, EDS, SEM, TEM and PL are used to confirm the formation of the novel arrayed structure and trace the conversion process. The results show that the conversion ratio can be conveniently tailored by the reaction time, and the PL properties of the obtained materials can be adjusted through the conversion ratio. Especially, the cable-like structure holds the PL properties of both ZnO and ZnS structures. This simple solution method can be further extended to the preparation of other semiconductor sulfide and selenide, and can amplify the application field of large-scale arrays of semiconductors.     

Kilogram-scale synthesis of carbon quantum dots for hydrogen evolution,sensing and bioimaging

A facile, low-cost, green, kilogram-scale synthesis of high quality CQDs were synthesized. The throughput of CQDs is 1.4975 kg in one pot and the as-prepared CQDs have a highly crystalline hexagonal structure with remarkable solubility, stability, and biocompatibility. It showed outstanding electrocatalytic activity, Fe³⁺ sensitivity and good biocompatibility.     

Simultaneous multichannel mass-specific detection for high-performance liquid chromatography using an array detector sector-field mass spectrometer

The use of a separation step, such as liquid chromatography, prior to inductively coupled plasma mass spectrometry (ICP–MS) has become a common tool for highly selective and sensitive analyses. This type of coupling has several benefits including the ability to perform speciation analysis or to remove isobaric interferences. Several limitations of conventional instruments result from the necessity to scan or pulse the mass spectrometer to obtain a complete mass spectrum. When the instrument is operated in such a non-continuous manner, duty cycle is reduced, resulting in poorer absolute limits of detection. Additionally, with scanning instruments, spectral skew can be introduced into the measurement, limiting quantitation accuracy. To address these shortcomings, a high-performance liquid chromatograph has been coupled to an ICP–MS capable of continuous sample introduction and simultaneous multimass detection. These features have been realized with a novel detector array, the focal plane camera. Instrument performance has been tested for both speciation analysis and for the elimination of isobaric interferences. Absolute limits of detection in the sub picogram to tens of picograms regime are obtainable, while the added mass dimension introduced by simultaneous detection dramatically increases chromatographic peak capacity.     

The MPE/UCB far-infrared imaging Fabry-Perot interferometer (FIFI)

FIFI is an imaging spectrometer with two or three Fabry-Perot interferometers (FPI) in series for airborne astronomical observations in the far-infrared range (=40...200m). It employs 5×5 arrays of photoconducting detectors and offers spectral resolutions as small as 2km/s. Resolution and bandwidth can be set over a wide range to match a variety of astronomical sources. Cryogenic optics minimizes thermal background radiation and provides for in-flight step tunable spatial resolution. At 158 m wavelength the background-limited NEP is 3 × 10^-15W/Hz at 40 km/s resolution and with two FPI's; with three FPI's the expected NEP is 10^-15WHz at 5 km/s resolution.The frequency-chopping mode of the high-resolution Fabry-Perot allows for line detection in extended objects. Absolute internal flux calibration ensures adequate flat fielding of the array elements.