Three-way-output response system by electric potential: UV-vis, CD, and fluorescence spectral changes upon electrolysis of the chiral ester of tetracyanoanthraquinodimethane

The newly prepared tetracyanoanthraquinodimethane (TCNAQ) derivatives 1a,b with a chiral auxiliary are good electron acceptors and exhibit weak circular dichroism (CD) based on the absorption of TCNAQ. The twin-type electron acceptor 1c with two TCNAQ units shows larger ellipticity by exciton coupling. UV-vis, CD, and fluorescence spectra were changed drastically upon electrochemical reduction of 1c, which demonstrates the unprecedented three-way-output response system.     

快速响应的温敏性聚(N-异丙基丙烯酰胺)水凝胶 Ⅰ.以CaCO_3为成孔剂制备方法、表征及动力学研究

以不同粒径的CaCO3粒子为成孔剂 ,合成了快速响应的温敏性聚 (N 异丙基丙烯酰胺 ) (PNIPA)水凝胶 .利用扫描电镜观察到水凝胶具有特殊的孔状结构 ,得到水凝胶的孔径大小为几十微米左右 .动力学研究表明 ,该水凝胶在温敏膨胀或收缩时 ,具有快速的响应速率 ,在 10min内的失水率可达 90 % .比较了干凝胶和4 0℃下失水后的凝胶两种不同状态下水凝胶的膨胀曲线 ,发现两者的溶胀动力学曲线明显不同 ,前者的曲线有拐点 .同时发现与失水收缩速率相比 ,水凝胶具有较慢的吸水膨胀速率 .     

Transient Spectroscopic Properties of [60] Fullerene—Containing Cyclic Sulphoxide

The properties of the triplet excited state of [60] fullerene-containing cyclic sulphoxide have been investigated by time-resolved absorption spectroscopy. Transient absorption bands of [60] fullerene-containing cyclic sulphoxide showed two decay-components, which wrer attributed to triplet excited states of different spin multiplicity. The properties of photoexcited states of [60] fullerene-containing cyclic sulphoxide are also reported.     

Ab initio calculations of vibronic activity in phosphorescence microwave double resonance spectra of p-dichlorobenzene

The phosphorescence spectrum of p-dichlorobenzene has been calculated using multiconfiguration self-consistent-field wave functions and the quadratic response technique. Attention has been paid to the intensity distribution of the singlet–triplet (³B_1u¹A_g) transition through a number of vibronic subbands. The second order spin–orbit coupling (SOC) contribution to the spin splitting of the ³B_1u (^3*) state is found to be almost negligible, and the calculations therefore provide a good estimate for the zero-field splitting (ZFS) parameters based only on the electron spin–spin coupling expectation values. Nuclear quadrupole resonance constants for the different Cl isotopes are also calculated to accomplish the ZFS assignment. The electric dipole activity of the spin sublevels in the triplet–singlet transitions to the ground-state vibrational levels is estimated by calculations of derivatives using distorted geometries which are shifted from the equilibrium position along different vibrational modes. A vibrational analysis of the phosphorescence spectrum, based on the SOC-induced mixing of the singlet and triplet states calculated along different vibrational modes, provides reasonable agreement with experimental data.Acknowledgment O. R.-P. would like to thank the European MOLPROP network for support. The authors thank Alexander Baev for fruitful discussions. This work was supported by the Swedish Royal Academy of Science (KVA).     

Synthesis of a Stimuli‐Responsive P‐Chiral Polymer with Chiral Phosphorus Atoms and Azobenzene Moieties in the Main Chain

A reaction of the P‐chiral compound (S,S)‐1,2‐bis(boranato(tert‐butyl)methylphosphino)ethane with an azobenzene derivative gave stimuli‐responsive polymers with P‐chiral phosphines in the main chain. This is the first example of a stimuli‐responsive P‐chiral polymer. The polymer isomerized from the trans to the cis form upon UV irradiation and reverted to the trans form reversibly. The polymer was able to coordinate to platinum, and the resulting polymer complex exhibited the Cotton effect owing to the chirality of the phosphorus atoms. The structure of the P‐chiral polymer obtained could be changed reversibly by light and thermal stimuli, and the polymer chain was induced to rotate helically when complexed with transition metals through the chiral phosphorus atoms.     

Fast GC for the analysis of fats and oils

Fast and conventional GC techniques were both applied to ten different lipidic matrices and the results then compared. The fats and oils were of fish, animal, and vegetable origin and were all simultaneously transesterified with acidic methanol before performing batch analysis of the fatty acid methyl esters (FAMEs) obtained. All FAMEs samples were consecutively analyzed three times by each method. The fast method significantly reduced the time required for analysis by a factor of 5 while maintaining a similar resolution. Furthermore, the reproducibility of relative quantitative data was measured on going from one method to the other. Peak identification was achieved through conventional GC‐MS in combination with linear retention index values contained in a home library and information derived from comprehensive 2D GC group patterns.     

n—InP在Fe^3＋／Fe^2＋溶液中光脉冲暂态行为（Ⅳ）

研究了波长、温度及表面处理对ｎ－ＩｎＰ光脉冲暂态行为的影响。结果表明，波长对时间常数无影响；随着温度升高，峰值下降，衰减变快。讨论了表面处理的影响，并对实验结果作了必要的解释。     

Use of cluster expansion techniques in quantum chemistry. A linear response model for calculating energy differences

In this paper we have reviewed the theoretical framework of the coupled-cluster (cc) based linear response model as a tool for directly calculating energy differences of spectroscopic interest like excitation energy (ee), ionisation potential (ip) or electron affinity (ea). In this model, the ground state of a many-electron system is described as in a coupled cluster theory for closed shells. The electronic ground state is supposed to interact with an external photon field of frequencyw, and the poles of the linear response function as a function ofw furnish with the elementary excitations of the system. Depending on the general form of the coupling term chosen, appropriate difference energies like ee, ip or EA may be generated. Pertinent derivations of the general working equations are reviewed, and specific details as well as approximations for ee, ip or ea are indicated. It is shown that the theory bears a close resemblance to the equation of motion (eom) method but is superior to the latter in that the ground state correlation is taken to all orders and may be looked upon as essentially a variant of renormalisedtda. A perturbative analysis elucidating the underlying perturbative structure of the formulation is also given which reveals that the theory has a hybrid structure: the correlation terms are treated akin to an open shellmbpt, while the relaxation terms are treated akin to a Green function theory. A critique of the methodvis-a-vis other cc-based approaches for difference energies forms the concluding part of our review.     

Optimization of culture parameters for production of podophyllotoxin in suspension culture of Podophyllum hexandrum

The root explants of the germinated seedlings of Podophyllum hexandrum were grown in MS medium supplemented with indole acetic acid (IAA) (2 mg/L) and activated charcoal (0.5%), and healthy callus culture was obtained after incubation for 3 wk at 20°C. The cultivation of plant cells in shake flask was associated with problems such as clumping of cells and browning of media, which were solved by the addition of pectinase and polyvinylpyrrolidone. The effect of major media components and carbon source was studied on the growth and podophyllotoxin production in suspension culture. It was found that glucose was a better carbon source than sucrose and that NH₄ ⁺:NO₃ ⁻ ratio (total nitrogen concentration of 60 mM) and PO₄ ³⁻ did not have much effect on the growth and product formation. The relative effect of culture parameters (inoculum level, pH, IAA, glucose, NH₄ ⁺:NO₃ ⁻ ratio, and PO₄ ³⁻) on the overall growth and product response of the plant cell suspension culture was further investigated by Plackett-Burman design. This indicated that inoculum level, glucose, IAA, and pH had significant effects on growth and production of podophyllotoxin. To identify the exact optimum concentrations of these parameters on culture growth and podophyllotoxin production, central composite design experiments were formulated. The overall response equations with respect to growth and podophyllotoxin production as a function of these culture parameters were developed and used to determine the optimum concentrations of these parameters, which were pH 6.0, 1.25 mg/L of IAA, 72 g/L of glucose, and inoculum level of 8 g/L.     

Determination of Copper at a Glassy Carbon Electrode Modified with Langmuir–Blodgett Film of p‐tert‐Butylthiacalix[4]arene

A new type of voltammetric sensor, Langmuir–Blodgett film of p‐tert‐butylthiacalix[4]arene modified glassy carbon electrode, was advanced and used for determining copper at trace levels by differential pulse stripping voltammetry. Calibration plot was found to be linear in the range of 2×10^?8 M to 5×10^?6 M; the detection limit was 2×10^?9 M. Possible recognition mechanism was also discussed. From determination of Copper in real samples (river, lake and tap water) it can be concluded that the method is rapid, sensitive in determining of copper and can be used in the analysis of natural water samples.