A comparison of measured room acoustics metrics using a spherical microphone array and conventional methods

The traditional microphone configuration used to measure room impulse responses (IRs) according to ISO 3382:2009 is an omnidirectional and figure-8 microphone pair. IRs measurements were taken in a 2500-seat auditorium to determine how the results from a spherical microphone array (an mh acoustics Eigenmike-em32) compare to those from the traditional microphone setup (a Brüel & Kjær Type-4192 omnidirectional microphone and a Sennheiser MKH30 figure-8 microphone). Measurements were obtained at six receiver locations, with three repetitions each in order to first evaluate repeatability. The metrics considered in this study were: reverberation time (T30), early decay time (EDT), clarity index (C80), strength (G), lateral energy fraction (J_LF) and late lateral energy level (L_J). Before calculating these quantities, the IRs were filtered to equalize the frequency response of the microphones and sound source. For the spherical array measurements, the omnidirectional (monopole) and figure-8 (dipole) patterns were extracted using beamforming. In terms of repeatability, the average standard deviation of the three measurements at each receiver location averaged across all metrics, receivers, and octave bands was found to be 0.01 just noticeable differences (JNDs). The analysis comparing the measurements from the two microphone configurations yielded differences which were less than 1 JND for the majority of metrics, with a few exceptions of EDT and C80 slightly above 1 JND. Based on this case study, these results indicate that spherical microphone arrays can be used to obtain valid room IR measurements, which will allow for the development of new metrics utilizing the higher spatial resolution made possible with spherical arrays.     

Ffast Transient Fluorescence Technique to Study Critical Exponents at the Glass Transition

The fast transient fluorescence (FTRF) technique was used to study critical exponents at the glass transition in free-radical crosslinking copolymerization (FCC) for two different monomeric systems, methyl methacrylate (MMA) and styrene (S). Pyrene (P_y ) was used as a fluorescence probe. The fluorescence lifetimes of P_y from its decay traces were measured and used to monitor the gelation process. Changes in the viscosity of the pregel solutions due to glass formation dramatically enhance the fluorescent yield of aromatic molecules. This effect is used to study the glass transition upon gelation of MMA and S monomeric systems as a function of time, at various temperatures and crosslinker concentrations. The results are interpreted in the view of percolation theory. The gel fraction and weight average degree of polymerization exponents β and γ are found to be 0.37 ± 0.02 and 1.66 ± 0.07 in agreement with percolation results.     

晶硅太阳电池原位光老化及热致输运机理

为研究晶体硅太阳电池在标准模拟光条件下的输出特性变化规律和电池内部载流子输运特性,采用原位光老化技术对被测电池进行光照处理,按标准测试实验流程测量电池的伏安特性及光谱响应等参量,发现原位光老化后太阳电池伏安特性各项参量衰减,导致电池效率降低;短波段光谱响应微量下降,是由于原位光老化过程中电池表面产生极微量的面缺陷导致经过硅表面的微量载流子被复合;而长波段响应明显降低,是由于晶硅内大量体缺陷被激活导致长波载流子在经过硅材料内部时被复合.随后将光老化后电池退火并测量比对电池各项特性参量,结果表明,退火对光老化后电池内部深层体缺陷具有较好的修复功能,但对浅层面缺陷没有修复功能,最终造成电池伏安特性参量和光谱响应只得到部分恢复.     

Verification of the Usefulness of Radiotracing Methods in Hydrodynamic Investigations

In the paper comparison of accuracy of two methods used for investigations of hydrodynamic in continuous flow tanks has been made. Basis for the comparison is the experimental work performed for big industrial wastewater concentration equalization tank. The first method is based on the radiotracer experiment while the second one uses the analysis of response on sudden change of the technological parameters. The radiotracer method has better accuracy connected with the shorter sampling period.

Ks wird die Genauigkeit zweier Methoden zur Untersuchting der Hydrodynamik von kontinuierlich arbeitenden Flüssigkeitsbehältern verglichen. Grundlage dafür sind experimentelle Untersuchungen an groβen Industrieabwasser-Ausgleichsbehältern. Die erste Methode bedient sich der Radiotracertechnik, während die zweite Methode auf einer plötzlichen Veränderung der technologischcn Parameter beruht. Es zeigt sich, daβ die Radiotracermethoden die besseren Ergebnisse liefert, wobei auβerdem noch kürzere Probenaltmeperioden von Vorteil sind.     

Solvent replacement to thermo‐responsive nanoparticles from long‐subchain hyperbranched PSt grafted with PNIPAM for encapsulation

Long‐subchain hyperbranched polystyrene (lsc‐hp PSt) with uniform subchain length was obtained through copper‐catalyzed azide‐alkyne cycloaddition click chemistry from seesaw macromonomer of PSt having one alkynyl group anchored at the chain centre and two azido group attached to both chain ends [alkynyl‐(PSt‐N₃)₂]. After precipitation fraction, different portions of lsc‐hp PSt having narrow overall molecular weight distribution were obtained for further grafting with alkynyl‐capped poly(N‐isopropylacrylamide) (alkynyl‐PNIPAM), which was obtained via single‐electron transfer living radical polymerization of NIPAM with propargyl 2‐bromoisobutyrate as the initiator and grafted onto the peripheral azido groups of lsc‐hp PSt via click chemistry. Thus, amphiphilic lsc‐hp PSt grafted with PNIPAM chains (lsc‐hp PSt‐g‐PNIPAM) was obtained and would have star‐like conformation in tetrahydrofuran (THF). By replacing THF with water, lsc‐hp PSt‐g‐PNIPAM was dissolved at molecular level in aqueous solution due to the hydrophilicity of PNIPAM and exhibited thermal induced shrinkage of PNIPAM arms. The water‐insoluble lsc‐hp PSt would collapse densely and could be served as a reservoir to absorb hydrophobic chemicals in aqueous solution. The influence of overall molecular weight of lsc‐hp PSt on the absorption of pyrene was studied. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

线缆系统电磁脉冲效应测量系统研制和试验

分析了实验室瞬态X射线产生的系统电磁脉冲(SGEMP)效应测试所面临的技术问题,提出了解决方法、措施以及实验室模拟瞬态X射线的SGEMP模拟试验方法。通过电子屏蔽、电磁屏蔽、光电隔离、信号对称提取等特殊技术处理,解决了SGEMP效应模拟试验方法和测量系统抗X射线、抗电磁辐射等技术问题,并在大型瞬态X射线模拟源上,测出了瞬态X射线辐照时金属腔内线缆的SGEMP效应波形及幅值。     

Quantitative measurement of hard X-ray spectra from laser-driven fast ignition plasma

Absolute Kα line spectroscopy is proposed for studying laser–plasma interactions taking place in the Au cone-guided fast ignition targets. X-ray spectra ranging from 20 to 100 keV were quantitatively measured with a Laue spectrometer composed of a cylindrically curved crystal and a filter-absorption method for Bremsstrahlung continuum emission. The absolute sensitivities of the Laue spectrometer systems were calibrated using pre-characterized laser-produced X-ray sources and radioisotopes. The integrated reflectivity for the crystal is in good agreement with predictions by an X-ray diffraction code. The energy transfer efficiency from incident laser beams to hot electrons, as the energy transfer mechanism, is derived from this work. The absolute yield of Au and Ta Kα lines were measured in the fast ignition experimental campaign performed at Institute of Laser Engineering, Osaka University. Applying the hot electron spectrum information from electron spectrometer and scaling laws, the energy transfer efficiency from the incident LFEX, a kJ-class PW laser, to hot electrons was derived for the first time.