Assignments of methanol laser lines by frequency measurements and Fourier transform spectroscopy

We have measured the frequencies of four CH₃OH far-infrared laser lines that were previously known only by wavelength measurement. Two of these lines turned out to be doublets, bringing the total number of measured lines to six. We can now confirm the assignments of five of them and definitely disprove the assignments proposed for the sixth.In particular we confirm the assignments for the four strong laser lines at 205 and 208 µm pumped by the 9-P(34) CO₂ laser line. These lines share a common upper level in the first excited CO-stretch state, and terminate in the upper and lower levels of a hybrid state with J=5. Heterodyne frequency measurements and conventional microwave spectroscopy show that both lines are split into two components approximately 3.5 MHz apart. The origin of this further splitting is interpreted as a perturbed K-splitting.Work supported by Consiglio Nazionale delle Ricerche -Italia     

Application of the stabilization method to interacting resonances

The stabilization method is applied to the case of interacting resonances in the photo-dissociation of van der Waals clusters composed by a rare gas atom bound to a dihalogen molecule. The study of an illustrative two-dimensional model consisting in a T-shaped NeI₂ molecule shows the adequacy of the method whenever the projection of the stabilization wave functions on the assumed prepared initial state is accounted for. The agreement of the fragmentation cross-sections with some previous results using the effective resolvent method and accurate close-coupling calculations is excellent. The method reveals its utility as a complementary tool since allows, through the analysis of the stabilization wave function in terms of zero-order levels, a precise characterization of the resonant states involved. Received 5 April 2002 / Received in final form 24 May 2002 Published online 19 July 2002     

Full-Wave Analyses for a Multi-Layered Microstrip Patch Antenna

This paper describes numerical modelling of a dual band multi-layered microstrip patch antenna operating at 35GHz on an in-house semi-insulating GaAs substrate. The simulated and measured resonant frequencies at both lower and upper resonant frequencies will be compared to check the accuracy of the different numerical modelling techniques.     

The energy exchange and the optimum length of the sample tube of opfirl

The energy exchange between the pumping laser and FIR signal in the optically pumped FIR laser (OPFIRL) system was studied. The iteration method has been used to calculate the power density of the pumping and FIR signals at any point along the optical axis of the sample tube. It was found that the power density of the FIR signal did not always increase along the length of the laser tube. There was a maximum FIR power density at the appropriate point in the sample tube. If the distance of maximum power point from the entrance of the OPFIRL tube was taken as the length of sample tube Z_opt, the maximum FIR laser output should be obtained. This was the optimum length of OPFIRL tube. The value of Z_opt was closely related to the parameter of OPFIRL such as the pumping power density, the pumping detuning and the frequency of the FIR laser. The energy-exchange and the maximum output of the fir laser were calculated under the ideal condition.     

Development of a RILIS ionisation scheme for gold at ISOLDE, CERN

At the ISOLDE on-line isotope separation facility, the resonance ionisation laser ion source (RILIS) can be used to ionise reaction products as they effuse from the target. The RILIS process of laser step-wise resonance ionisation of atoms in a hot metal cavity provides a highly element selective stage in the preparation of the radioactive ion beam. As a result, the ISOLDE mass separators can provide beams of a chosen isotope with greatly reduced isobaric contamination. With the addition of a new three-step ionisation scheme for gold, the RILIS is now capable of ionising 26 of the elements. The optimal scheme was determined during an extensive study of the atomic energy levels and auto-ionising states of gold, carried out by means of in-source resonance ionisation spectroscopy. Details of the ionisation scheme and a summary of the spectroscopy study are presented.     

低密度聚乙烯光引发交联机理——Ⅱ.BNB自旋捕捉ESR研究

在光引发剂二苯甲酮(BP)存在下,紫外光辐照低密度聚乙烯(LDPE)所形成的自由基中间体已被自旋捕捉剂2,4,6-三特丁基亚硝基苯(BNB)所捕捉,其自旋加合物自由基已为电子自旋共振(ESR)所特征。现已检测和鉴定到二种自旋加合物:一种是叔碳自由基;另一种是仲碳自由基。它们分别是由BP的激发三重态从LDPE链的支化点和亚甲基团上夺氢所形成的自由基中间体同自旋捕捉剂BNB反应生成的。上述的证据表明:LDPE的光引发交联点主要发生在叔碳和仲碳原子上,且H-型交联点占主导地位。     

低场脉冲核磁共振测定二醋酸纤维素丝束中油剂

研究了采用低场脉冲核磁共振(NMR)测定二醋酸纤维素丝束油剂的新方法，给出NMR法测定二醋酸纤维素丝束油荆含量的标准曲线。同时对NMR法测量二醋酸纤维素丝束油荆不确定度进行了评估。结果表明，NMR法具有分析速度快、无污染、无损伤和准确度高的优点，适合于二醋酸纤维素丝束油荆的分析。     

Magnetic resonance in amorphous metals based on Fe in the millimeter radiowave range

The research technique of amorphous magnetics is described. The paper gives the experimental data obtained by a multifunctional low-temperature radiospectrometer Buran in the mm radiowave range and presents their analysis.     

Multinuclear magnetic resonance studies on intramolecular chalcogen-tin coordination in compounds of the type Me2Sn(X)CH2CH2P(E)Ph2 (X = Halogen, E = Chalcogen)

Multinuclear magnetic resonance data for the title compounds are presented and discussed. The intramolecular coordination observed in the solid state is shown to be retained in solution. The best probes for the presence or absence of pentacoordination at tin are provided by the various tin-element coupling constants, although chemical shifts are in some cases also informative. A selenium-proton correlated spectrum indicated that the coupling constant ¹J(Sn,Se) has a positive sign.