无线电发射装置的仿真与制作

介绍了无线电发射原理并研制一无线话筒。用Multisim软件对电路进行仿真模拟,将模拟与实践制作相结合,通过实验参数的调整,制作出一个简单发射装置。     

正交试验法优选都梁凝胶贴剂的提取工艺

采用超声法优选都梁凝胶贴剂中白芷、川芎药对的最佳提取工艺.按照L9（34）正交试验设计,以欧前胡素、阿魏酸的转移率及干浸膏得率为综合评价指标,用高效液相色谱法进行含量测定.结果表明,都梁凝胶贴剂中白芷、川芎药对的最佳超声提取工艺为：8倍量的80％乙醇提取2次,每次超声40min;此时浸膏中欧前胡素的平均含量为0.1379％,阿魏酸的平均含量为0.1410％.本实验所建立的高效液相色谱法的准确度、精密度与重现性良好;提取工艺简便,合理.     

物理实验教学新模式的探索与实践

提出了一种新的物理实验教学模式，论述了建立实验教学模式所遵循的基本原则和基本做法，简要介绍实施新的教学模式所取得的教学成果。     

A mass spectrometric line for tritium analysis of water and noble gas measurements from different water amounts in the range of microlitres and millilitres

This paper describes the procedure followed for noble gas measurements for litres, millilitres and microlitres of water samples in our laboratory, including sample preparation, mass spectrometric measurement procedure, and the complete calibrations. The preparation line extracts dissolved gases from water samples of volumes of 0.2 μ l to 3 l and it separates them as noble and other chemically active gases. Our compact system handles the following measurements: (i) determination of tritium concentration of environmental water samples by the ³He ingrowth method; (ii) noble gas measurements from surface water and groundwater; and (iii) noble gas measurements from fluid inclusions of solid geological archives (e.g. speleothems). As a result, the tritium measurements have a detection limit of 0.012 TU, and the expectation value (between 1 and 20 TU) is within 0.2 % of the real concentrations with a standard deviation of 2.4 %. The reproducibility of noble gas measurements for water samples of 20–40 ml allows us to determine solubility temperatures by an uncertainty better than 0.5 °C. Moreover, noble gas measurements for tiny water amounts (in the microlitre range) show that the results of the performed calibration measurements for most noble gas isotopes occur with a deviation of less than 2 %. Theoretically, these precisions for noble gas concentrations obtained from measurements of waters samples of a few microlitres allow us to determine noble gas temperatures by an uncertainty of less than 1 °C. Here, we present the first noble gas measurements of tiny amounts of artificial water samples prepared under laboratory conditions.     

Schnell-Methode zur Umsetzung von Kohlenwasserstoffen zu Wasserstoff für die Isotopenanalyse

Es wird eine weiterentwickeltes, isotopenanalytisches Verfahren zur probenchemischen Umsetzung von Kohlenwasserstoffen mit Chromium zu Wasserstoff bei 1300 K vorgestellt. Die erzielten Testergebnisse zeigen anhand der gemessenen δD-Werte, daβ Quarzöfen bei diesen Temperaturen noch keine die Isotopenmeβwerte beeinflussende Diffusion von Wasserstoff durch die Wandung zulassen. Auβerdem erfolgte die Reaktion nahezu spontan und vollständig, was die Methode zeitlich sehr effektiv macht.

A modified isotope analytical method is presented for the chemical reaction of hydrocarbons with chromium at 1300 K to form hydrogen. The test results obtained (i.e. the measured δD-values) show that at this temperature quartz heating tubes do not allow hydrogen to diffuse through the wail, which fact would influence the isotopic composition. Furthermore the reaction proceeds nearly spontaneously and quantitatively, which yields an effective method, especially with respect to time.     

Angular distribution of atoms sputtered from germanium by 1–20 keV Ar ions

The angular distribution of atoms sputtered from germanium under 1–20 keV Ar⁺ ion bombardment (normal incidence) has been studied experimentally and using computer simulations. A collector technique combined with Rutherford backscattering to analyze the distribution of collected material was used. In addition, the surface topography was under control. It was found that the experimental angular distribution of sputtered atoms (E ₀=3–10 keV) could be approximated by the function cos ⁿ θ with n≈ 1.65. Such a high value of n is connected with the surface scattering of ejected atoms and a noticeable contribution of backscattered ions to the formation of the sputter flux (the mass effect). The target surface was found to be practically flat even at ion fluencies ～10¹⁸ ions/cm². The results obtained are compared with data from the literature, including our recent data on Si sputtering.     

高能激光精确指向监视系统设计及装调

为实现高能激光的有效发射,设计了一种高能激光精确指向监视系统.该系统通过调整主、次镜的相对位置来进行调焦,同时能够在100~1000m范围内对自然目标清晰成像.利用ZEMAX软件对光学系统进行设计优化,运用ZYGO干涉仪和大口径平行光管进行辅助装调,使成像系统成像角分辨率达到3.38μrad5μrad,光学系统同轴度达到4.75″≤5″,满足设计指标要求.该系统能够捕获、识别、跟踪目标,从而引导高能激光进行精确打击.     

电力设备红外图像的小波阈值去噪方法研究

对于电力设备的红外图像自动检测系统,图像去噪是非常关键的。针对传统的小波硬、软阈值函数在去噪时存在的不足,在传统小波硬、软阈值函数的基础上对其进行了改进。改进的阈值函数克服了硬阈值函数不连续的缺陷,改善了软阈值函数具有恒定偏差的不足,并引入了两个变量,具有一定的灵活性。同时还使用了一种新的分层阈值选择函数代替统一阈值方法,以改善实际应用的效果。实验结果表明:改进的小波阈值去噪方法在视觉效果、峰值信噪比和均方误差方面都优于传统的硬、软阈值去噪方法;改进的小波阈值去噪方法可以运用到红外图像自动检测系统中,使系统具有更好的去噪效果。     

塑料复制光栅研究

本文介绍塑料溶液流延技术复制光栅,用于灯具、电扇、舞台等,成本廉价、工艺简便、适于批量生产,为全息光栅在民用领域中推广具有广泛应用价值。     

超声-硝酸联合法提取褐煤腐植酸工艺

实验考察了超声、硝酸预处理、酸化程度、碱液浓度、反应温度、液固比、反应时间等对腐植酸提取率的影响,并通过正交设计选择最佳预氧化条件和褐煤腐植酸的最佳提取条件.结果表明;超声硝酸联合氧化法提取腐植酸的最佳条件为：超声频率80kHz,氧化温度50℃,硝酸液固比（mL/g）为5∶1,氧化时间90min,硝酸浓度1.5mol/L.