Preparation and characterization of the LiInSe2 thin films

Summary p-type LiInSe₂ films have been prepared by the rapid evaporation method onn-type Si andn-type GaP. Various characterization techniques such as the X-ray analysis, the Rutherford backscattering (RBS) analysis and the scanning electron microscopy were used to evaluated the quality of the films. The rectifications of the preliminary heterojunctions are demonstrated. Paper presented at the ?V International Conference on Ternary and Multinary Compounds?, held in Cagliari, September 14–16, 1982.     

Structure and magnetism of Coa(1−x)MnaxGeb epitaxial films

The structural and magnetic phase diagrams of Co_a(1−x)Mn_axGe_b epitaxial films near the composition of Heusler alloy Co₂MnGe have been studied using combinatorial molecular beam epitaxy techniques. Epitaxial growth on Ge (1 1 1) has been stabilized over nearly the entire composition range of the ternary system. Epitaxial constraints play an important role for the small number of observed structural phases. The variety of high-temperature magnetic properties, and the structural and chemical compatibilities with group IV elements make the ternary system promising for the science and applications of spintronics.     

Direct angle resolved photoemission spectroscopy and superconductivity of strained high-T c films

Since 1997 we systematically perform direct angle resolved photoemission spectroscopy (ARPES) on in-situ grown thin (<30 nm) cuprate films. Specifically, we probe low-energy electronic structure and properties of high-T _c superconductors (HTSC) under different degrees of epitaxial (compressive vs. tensile) strain. In overdoped and underdoped in-plane compressed (the strain is induced by the choice of substrate) ≈15 nm thin La_{2 − x} Sr _x CuO₄ (LSCO) films we almost double T _c to 40 K, from 20 K and 24 K, respectively. Yet the Fermi surface (FS) remains essentially two-dimensional. In contrast, ARPES data under tensile strain exhibit the dispersion that is three-dimensional, yet T _c drastically decreases. It seems that the in-plane compressive strain tends to push the apical oxygen far away from the CuO₂ plane, enhances the two-dimensional character of the dispersion and increases T _c, while the tensile strain acts in the opposite direction and the resulting dispersion is three-dimensional. We have established the shape of the FS for both cases, and all our data are consistent with other ongoing studies, like EXAFS. As the actual lattice of cuprates is like a ‘Napoleon-cake’, i.e. rigid CuO₂ planes alternating with softer ‘reservoir’, that distort differently under strain, our data rule out all oversimplified two-dimensional (rigid lattice) mean field models. The work is still in progress on optimized La-doped Bi-2201 films with enhanced T _c.      

Direct observation of slow morphological transformations and wetting behavior of pulsed laser deposited sub-monolayer gold on (0 0 0 1) sapphire in atmosphere

Using high-resolution atomic force microscope we observed in ambient atmosphere the slow morphological transitions of the incipient adlayer of gold grown on (0 0 0 1) sapphire substrate by pulsed laser deposition. The equivalent average uniform thickness of the gold deposition was about 0.55 Å, which is about one-fourth of its monolayer. A dynamic simulation revealed that about 10% of the gold was implanted into the substrate up to the depth of about 3.3 nm and the top monolayer of the sapphire surface was almost completely depleted of oxygen atoms due to the preferential sputtering by the plume particles. The gold adlayer transformed into a labile phase which enhanced the surface roughness and had a preferred orientation of a wavy structure during 24 h of the deposition. The auto-correlation function of this wavy structure in labile metastable phase revealed two-fold symmetry and provided a preferential size of about 4 nm (peak to peak) with a mean separation of 8 nm. At the end of about 6 days this phase was found to completely transform into an apparently de-wetted phase of beads with average in-plane diameter of ∼20 nm and height of ∼7 nm having large size distribution. Each bead was seen to have coating of a concentric corona layer, which might be that of the condensed moisture or other gaseous species from atmosphere because subjecting these samples to vacuum removed this layer. These observations shed light on the dynamics of the pulsed laser deposited metastable gold adlayer in the incipient stage of its growth on sapphire and their wetting or de-wetting mechanisms in ambient atmosphere.     

Ultrasound-assisted fabrication of metal nano-porous shells across polymer beads and their catalytic activity for reduction of 4-nitrophenol

Metal nano-porous architectures are a novel class of nanomaterials which has been applied in the fields of catalysis, sensing and gas storage because of their high surface-to-volume ratio, high mechanical strength and long-range ordered architectures. A commonly-used synthetic strategies to achieve architectures with high precision and diverse porosity design is the seed-and-growth method. In this work, using a dual-frequency sequential sonication approach, we have demonstrated a sonochemical-assisted one-pot seeding with a successive shell growth synthetic strategy for mesoporous metal deposition via a gold (Au) nanoparticle and poly(styrene) beads system. A uniform coating of gold nanoparticle seeds with dense surface coverage was formed by first employing 300 kHz ultrasound irradiation while the nano-porous shell growth was then performed under 1 MHz ultrasonic frequency. The precise control over the process conditions and parameters allowed for the design of well-defined shell thicknesses and surface roughness and area. The catalytic property of the MNMs was evaluated for the degradation of 4-nitrophenol and a high catalytic activity was achieved for the most porous gold structures, suggesting synergistic effects between the architecture of the nanomaterials and their surface reactivity.     

强流电子束泵浦XeCl准分子激光动力学模型

强流电子束泵浦XeCl准分子激光动力学模型由三部分组成,即电子束能量沉积的计算;电子温度、电子反应速率的计算和化学/激光动力学。这个模型可以准确地预报小信号增益、吸收等激光特征量的时间变化规律。 该模型是在文献[1]、[2]、[3]报导的动力学模型的基础上提出的。采用四阶龙格_库塔法在VAX—11/780机器上进行数值求解。 计算给出XeCl准分子激光反应过程中各种粒子浓度、小信号增益、吸收、输出光强、激发速率以及平均电子能量随时间的变化规律。计算结果表明本征效率是激发速率,电流密度和工作气体(Ne/Xe/HCl)的各分压比的函数。 该模型可为高功率准分子激光器的研制提供设计参数和最佳实验条件。     

Characterization of BCN films synthesized by radiofrequency plasma enhanced chemical vapor deposition

Boron carbonitride (BCN) films have been synthesized on Si(1 0 0) substrate by radio frequency plasma enhanced chemical vapor deposition using tris-(dimethylamino)borane (TDMAB) as a precursor. The deposition was performed at the different RF powers of 400-800 W, at the working pressure of 2×10⁻¹ Torr. The formation of the sp²-bonded BCN phase was confirmed by Fourier transform infrared spectroscopy. X-ray photoelectron spectroscopy measurements showed that B atoms were bonded to C and N atoms to form the BCN atomic hybrid configurations with the chemical compositions of B₅₂C₁₂N₃₆ (sample 1; prepared at the RF power of 400 W), B₅₂C₁₀N₃₈ (sample 2; at 500 W) and B₄₆C₁₈N₃₆ (sample 3; at 800 W), respectively. Near-edge X-ray absorption fine structure (NEXAFS) measurements indicated that B atoms were bonded not only to N atoms but also to C atoms to form various configurations of sp²-BCN atomic hybrids. The polarization dependence of NEXAFS suggested that the predominant hybrid configuration of sp²-BCN films oriented in the direction perpendicular to the Si substrate.     

Optical emission spectroscopy of the sputtering process in the triode system

The results of spectroscopic investigation of plane plasma discharge and sputtering processes in the triode system are presented. The forced electric discharge with currents of 1–4 A at an argon pressure of 1 mTorr was studied using the emission spectroscopy method. The spectra of plasma discharge were observed in the 200–1100 nm wavelength range. Two metal targets, gold and silver, were used for sputtering. It was found that a part of sputtered particles is ionized in plasma. The emission spectra of the ionized gold and silver species were observed as a function of target voltage while sputtering. It was shown that the number of ionized metal species depends on the energy of argon ions.