Kinetics and mechanism of the formation of poly[(1,1,3,3-tetramethyldisiloxanyl)ethylene] and poly(methyldecylsiloxane) by hydrosilylation

The kinetics of the formation of poly(carbosiloxane), as well as of alkyl-substituted poly(siloxane), by Karstedt's catalyst catalyzed hydrosilylation were investigated. Linear poly(carbosiloxane), poly[(1,1,3,3-tetramethyldisiloxanyl)ethylene], (PTMDSE), was obtained by hydrosilylation of 1,3-divinyltetramethyldisiloxane (DVTMDS) and 1,1,3,3-tetramethyldisiloxane (TMDS), while alkyl-substituted poly(siloxane), poly(methyldecylsiloxane), (PMDS), was synthesized by hydrosilylation of poly(methylhydrosiloxane) (PMHS) and 1-decene. To investigate the kinetics of PTMDSE formation, two series of experiments were performed at reaction temperatures ranging from 25 to 56 °C and with catalyst concentrations ranging from 7.0 × 10⁻⁶ to 3.1 × 10⁻⁵ mol Pt/mol CHCH₂. A series of experiments was performed at reaction temperatures ranging from 28 to 48 °C, with catalyst concentrations of 7.0 ×10⁻⁶ mol of Pt per mol of CHCH₂, when kinetics of PMDS formation was investigated. All reactions were carried out in bulk, with equimolar amounts of the reacting Si H and CHCH₂ groups. The course of the reactions was monitored by following the disappearance of the Si H bands using quantitative infrared spectroscopy. The results obtained showed typical first order kinetics for the PTMDSE formation, consistent with the proposed reaction mechanism. In the case of PMDS an induction period occurred at lower reaction temperatures, but disappeared at 44 °C and the rate of Si H conversion also started to follow the first-order kinetics. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2246–2258, 2007     

Fully-angular polyhex chains with minimal total π-electron energy

By Hückel molecular orbital (HMO) theory, the calculation of the total energy of all π-electrons in conjugated hydrocarbons can be reduced to that of E(G)=|λ₁|+|λ₂|+?+|λn|, where λi are the eigenvalues of the corresponding graph G. Denote by Ψn the set of all fully-angular polyhex chains with n hexagons. In this paper, we show that Hn has the minimum total π-electron energy among chains in Ψn, where Hn is the helicene chain.     

托卡马克能量约束及自举电流效应的初步考虑

基于Lee等人的离子温度梯度模导致的反常热能输运系数,本文研究了辅助加热托卡马克等离子体的能量约束行为,并对自举电流的效应作了初步考虑。结果表明,计算得到的能量约束时间随等离子体电流I_p和托卡马克大半径R增大而增长,随注入功率P_t、环向场B_t以及等离子体小半径α的增大而缩短。这些结果与Kaye-Goldston的经验约束定标具有相同的趋势。自举电流的存在总是导致能量约束时间的增加,当自举电流与总电流的比值γ较小时,能量约束时间的增加率约为γ/2。此外,自举电流将造成锯齿反转半径的减小。     

HL—1装置中心热区电子热传导初步分析

在电流及温度分布满足“不变性”原理的基础上,本文分析了等离子体中心热区的能量平衡,求出了电子热传导系数,根据实验数据拟合出HL-1装置电子热传导系数的定标关系为X_e=6.8(n_(eq1))~(-1.2)。此关系与其他托卡马克装置的结果类似。     

He-N2 radiofrequency discharge: Influence of N2 on discharge and afterglow

A diagnostic study q (energy transfer processes in a He-N₂ flowing discharge and afterglow has been performed in a radiofrequency-produced plasma cooled in a liquid nitrogen hath. Optical emission spectroscopy in the visible and infrared spectral range as well as Langrnuir probe diagnostics were used. The vibrational kinetics of CO injected in such an afterglow has been examined. It shows a slow cooling of the electrons in the afterglow regime. The electron kinetics responsible joy CO vibrahonal excitation is turned off when N₂ is added to the He discharge, while that for vibrationally excited N₂ molecules is turned on. The results are discussed on the basis of previous theorerical calculations and experiments on the He-N₂ system.     

偏硅酸钙中Pr3+的4f5d态的光谱特性及Pr3+→Gd3+的能量传递

合成了高效发射UV光的CaSiO3:Pr^3 新型荧光体，研究了室温下Pr^3 的4f5d态的发射和激发光谱，Pr^3 的4f5d态的最低子能级向4f^2组态的^3H4，^3H6和^1G4能级跃迁产生UV发射，并不伴随有4f-4f能级跃迁的可见光发射。Pr^3 的浓度猝灭是由于辐射和无辐射能量传递造成的，同时，在CaSiO3中，存在Pr^3 →Cd^3 的能量传递，探讨了其能量传递特性。     

H原子与CO2分子碰撞的化学反应与能量转移

用时间分辨傅立叶红外发射光谱的方法对H原子与CO2分子的碰撞动力学进行了实验研究．用紫外激光光解的方法分别制备出三个不同平动能为174．7、241．0和306．2 kJ／mol的氢原子,并引发H CO2→OH CO反应．观察到了反应的产物,即振动激发的CO (v≤2)．同时也看到了在H原子与CO2分子的碰撞中发生高效的T- V能量转移．CO2的反对称伸缩模的最高振动能级为v=4．化学反应与能量转移的速率之比大约为10．     

The properties and structures of the mono- and the di- vacancy in Cu crystal

The structures and energies of formation and migration of the mono- and di-vacancy in Cu crystal have been described and calculated with modified analytical embedded atom method (MAEAM). The lattice relaxation is considered with molecular dynamics (MD) method at T=0 K. The results show the FN di-vacancy is the most stable and likely occurs in practice from the energy minimization. Compared with the mono-vacancy, the formation energy of the FN di-vacancy is higher than that of a mono-vacancy, but lower than that of two isolated mono-vacancy. The preferred migration mechanism of the FN di-vacancy is multi-jump of either vacancy (rotating the di-vacancy). The calculated migration energy of the FN di-vacancy is lower than that of a mono-vacancy, so the FN di-vacancy is easier to migrate. All of the calculated results are in good agreement with the experimental values.     

�Թ�ŵ��������߻�����ż����C2��

在常温常压下采用新型旋转电极等离子体反应器，对辉光等离子体作用下的甲烷偶联反应制C2烃进行了研究。结果表明，甲烷偶联反应的主要产物为C2H2，占C2烃的80%以上，能量效率在5.6%～11.2%之间；增加H2含量可以提高CH4转化率和C2烃收率；在500～2200kJ•mol−1的能量密度范围内，CH4转化率随能量密度的增大而线性增加，C2烃收率随着能量密度的增加呈峰形变化趋势。     

Evaluation of the drag force by integrating the energy dissipation rate in stokes flow for 2D domains using the FEM

The total drag force on the surface of a body, which is the sum of the form drag and the skin friction drag in a 2D domain, is numerically evaluated by integrating the energy dissipation rate in the whole domain for an incompressible Stokes fluid. The finite element method is used to calculate both the energy dissipation rate in the whole domain as well as the drag on the boundary of the body. The evaluation of the drag and the energy dissipation rate are post-processing operations which are carried out after the velocity field and the pressure field for the flow over a particular profile have been obtained. The results obtained for the flow over three different but constant area profiles—a circle, an ellipse and a cross-section of a prolate spheroid—with uniform inlet velocity are presented and it is shown that the total drag force times the velocity is equal to the total energy dissipation rate in the entire finite flow domain. Hence, by calculating the energy dissipation rate in the domain with unit velocity specified at the far-field boundary enclosing the domain, the drag force on the boundary of the body can be obtained.