A dissipation‐free numerical method to solve one‐dimensional hyperbolic flow equations

In this paper, a numerical method to capture the shock wave propagation in 1‐dimensional fluid flow problems with 0 numerical dissipation is presented. Instead of using a traditional discrete grid, the new numerical method is built on a range‐discrete grid, which is obtained by a direct subdivision of values around the shock area. The range discrete grid consists of 2 types: continuous points and shock points. Numerical solution is achieved by tracking characteristics and shocks for the movements of continuous and shock points, respectively. Shocks can be generated or eliminated when triggering entropy conditions in a marking step. The method is conservative and total variation diminishing. We apply this new method to several examples, including solving Burgers equation for aerodynamics, Buckley‐Leverett equation for fractional flow in porous media, and the classical traffic flow. The solutions were verified against analytical solutions under simple conditions. Comparisons with several other traditional methods showed that the new method achieves a higher accuracy in capturing the shock while using much less grid number. The new method can serve as a fast tool to assess the shock wave propagation in various flow problems with good accuracy.     

KClO_4/Zr在石英管内的燃烧发射光谱与燃烧产物分析

为了研究燃烧条件对KClO_4/Zr烟火剂燃烧过程中光辐射性能的影响,考察了KClO_4/Zr在开放环境和不同规格封闭石英管内的燃烧发射光谱和燃烧产物。借助光纤光谱仪、光电二极管和示波器测试了烟火剂燃烧过程中的光辐射能量分布和闪光时间-强度曲线,分析了所得发射光谱在(590±10),(750±10)和(808±10)nm三个主吸收波段内的光谱效率,借助SEM表征了不同燃烧条件下KClO_4/Zr燃烧产物的形貌。结果表明:在开放条件下燃烧时,KClO_4/Zr的燃烧发射光谱在可见光到近红外的宽波段内,最强辐射出现在730~820nm波段。在石英管内封闭燃烧时,随着石英管体积的减少,在石英管外检测到的燃烧发射光谱强度逐渐减弱,光谱能量分布也呈现不同的变化规律,而且对火焰发射光谱分布进行处理后,随着石英管体积的变化,得到(590±10),(750±10)和(808±10)nm波段的光谱效率也呈现不同的变化规律。但是,随着石英管体积的减少,KClO_4/Zr烟火剂的爆燃闪光辐射时间逐渐缩短,峰值辐射强度逐渐提高。增加石英管的直径,有利于在管外获得更高的有效光辐射能量,减少石英管的直径,则有利于提高烟火剂的峰值辐射强度。随着管直径的增大,KClO_4燃烧更加充分,产物粒径较小,呈规则的球状。而管长度的改变对反应并无太大影响。     

背景典型斑点特征的聚类分析

迷彩是一项重要的目标防护手段,斑点形状设计是进行迷彩设计的基础。首先自动提取背景图像中的明显斑点,然后分析背景斑点周长、面积、伸长度、矩形度、细长度、分散度等特征的统计特性,最后将长度、矩形度、细长度、分散度作为斑点特征向量对提取出的背景斑点进行HCM聚类分析,进而得到背景典型斑点的特征参数。该方法能得到大样本背景图像斑点特征的统计特征,对自动、定量化的迷彩设计具有一定意义。     

The effect of different lattice sites substitution on photoluminescence characteristics of Eu2+/Ce3+ doped M5(ZO4)3X

The empirical formula of Van Uitert is applied to calculating the emission wavelengths of haloapatite and silicon apatite phosphors doped with Eu²⁺/Ce³⁺. The relationship between emission wavelengths and occupied lattice sites of Eu²⁺/Ce³⁺ is discussed in haloapatite crystal. For phosphors of haloapatite and silicon apatite doped with Eu²⁺, the emission bands of the long-wave region are interpreted reasonably. Phosphors Sr₅(PO₄)₂SiO₄ doped with Eu²⁺/Ce³⁺ are synthesized by high temperature solid state reaction under two different atmospheres, the spectral characteristics of Eu²⁺/Ce³⁺ occupying different lattice sites are studied. The luminescent materials Sr₅(PO₄)₂SiO₄ doped with Eu²⁺/Ce³⁺ are promising blue-green phosphors for application in white-LEDs.     

Quantitative assessment of rhodamine spectra

With the development of single-molecule detection and super-resolution fluorescence imaging, rhodamine dyes gain new life. Through the modification of the N-substituents and the replacement of the oxygen atom in xanthene, the wavelength and brightness can be effectively changed. However, the spectra of rhodamine, especially due to the balance between ring-closed non-fluorescent lactone and ring-opened fluorescent zwitterion/cation, are sensitive to interference from various environmental factors. In this way, the spectral data of various rhodamines reported by different research groups under different test conditions lacked comparability, sometimes even lacked accuracy. In order to meet the requirements for the accuracy and uniformity of spectral data in the research of single molecule imaging and dye structure-fluorescence relationship study, we have tested the spectra of fifteen rhodamine dyes that cover the visible and near-infrared regions under exactly the same conditions. By studying the dependence of the spectra on dye concentrations, it was confirmed that 1 μmol/L was ideal for detection less from the interference of dye molecule aggregation. We provide comprehensive and reliable spectral data of these fifteen dyes, which are expected to be used as references for future research. And the direct comparison of different rhodamine spectra would help to understand the structure-fluorescence relationship of rhodamines.     

回归分析法在风机特性中的应用

为得到理想的风机特性曲线，文中结合实际，在传统方法的基础上，提出了回归分析法，并在Matlab环境中对实测数据进行建模仿真，比较回归效果，得到了较为理想的风机特性曲线，消除了在以往特性曲线中存在的拟合曲线不光滑，回归效果不佳等问题，可有效地反映出厂风机的性能。     

Relation between Airy beams and triple-cusp beams

Airy beams and triple-cusp beams are two kinds of accelerating beams. The propagation characteristics and internal topological structures of accelerating Airy beams are well understood because of the developed mathematical theory about Airy function. However, limited information is available about the optical characteristics of accelerating triple-cusp beams. In this work, the relationship between Airy beams and triple-cusp beams is examined theoretically and experimentally. Results reveal some important optical characteristics of triple-cusp beams based on the optical characteristics of Airy beams. These findings are expected to provide a foundation for future applications of triple-cusp beams.     

新郑西亚斯东周玉器材料属性与加工工艺的科技分析

中国玉文化源远流长，治玉工艺经过各个时代的不断发展和完善，在一定程度上能反映古代社会生产力发展水平及文化、贸易、技术交流等信息。利用能量色散型X射线荧光光谱（EDXRF）、激光拉曼光谱（LRS）、超景深光学显微系统（OM）等分析技术，结合硅胶覆膜微痕复制技术，对河南省新郑西亚斯东周墓地出土的一批玉器进行科技分析。首先利用化学成分和物相结构分析技术确定了玉器材质的矿物属性，其次利用显微分析技术表征了玉器表面及穿孔内部和印模的加工痕迹，特别是阴刻纹饰和穿孔微痕特征，最后探讨了玉器样品的材料属性和加工工艺两者之间的联系。化学成分和物相结构分析结果表明，所分析的西亚斯东周玉器材质丰富，主要矿物组成有滑石、透闪石、水晶、云母等。玉器表面纹饰微痕特征分析表明，所分析玉器阴刻工艺采用了两种加工工具，分别是砣具和手持硬质工具。穿孔微痕分析特征表明，钻孔包括单面钻孔和双面/多面钻孔两种方式，钻孔工艺则有实心钻、管钻等。部分玉器钻孔形状和内部微痕特征表明，尽管均采用了实心钻工艺，但所采用的实心钻头在形状上存在差异，同时，也存在是否配合解玉砂进行钻孔的差异。不同材料属性的玉器采用了不同的加工工艺。滑石质玉器，莫氏硬度1，器型主要为玉片饰，其表面阴刻纹饰主要采用手持硬质工具进行刻画，钻孔主要采用了双面钻孔方式，并使用了实心钻头未添加解玉砂进行加工，钻头形状可能为圆锥状；云母质玉器，莫氏硬度2~3，器型主要为玉玦片饰，纹饰采用了砣具添加解玉砂的加工工艺，钻孔方式为单面钻孔，采用了管钻工艺。透闪石型玉器，莫氏硬度5~6，器型主要为玉片饰，表面纹饰采用砣具配合解玉砂砣刻，以双面钻孔的方式为主，钻孔工艺为实心钻头配合解玉砂工艺，钻头形状与滑石类样品一致，为圆锥状。水晶质玉器，莫氏硬度7，均为珠饰，表面无纹饰，钻孔方式为双面/多面钻孔，钻孔工艺为实心钻配合解玉砂工艺，且钻头可能为圆柱形。研究结果表明，玉器表面纹饰所采用的阴刻工艺和钻孔工艺，与玉器本身的材料属性、器型等存在密切关系。     

反舰导弹中波与长波红外成像制导优势对比研究

反舰导弹红外成像制导工作波段的选择是一项重要而又复杂的工作。首先对海面舰船目标的红外特性进行理论分析;然后选择中纬度夏、冬两个季节,白天海洋消光系数、自置气象视距气溶胶模式作为两个典型的大气模型,并利用光学大气传输计算软件ART2100计算典型大气模型条件下的红外传输透过率;最后结合理论分析和计算结果,对中波和长波红外制导优劣进行分析研究,得出工作波段选择的参考依据。