电聚合苯胺过程的在线紫外-可见光谱

用在线紫外-可见光谱电化学的方法对0.5mol/L硫酸水溶液中苯胺在ITO导电玻璃电极上的电化学聚的过程进行了研究.结果表明在循环伏安条件下苯胺发生了电聚合,聚合速率与苯胺浓度成正关系;而且在线紫外-可见电化学光谱表明,在0.01mol/L苯胺溶液的电聚合过程的诱导期较长.恒电位条件下的在线紫外-可见电化学光谱显示苯胺浓度为0.05mol/L,电位为0.8V时,在ITO电极上苯胺低聚合物中间体可能产生于聚苯胺形成之前;而0.01mol/L苯胺在0.8V电位下不发生聚合,但在线紫外-可见光谱又显示此时在电极上可能存在小的苯胺低聚物的中间体;在线紫外-可见光谱表明这种中间体是可能产生并存在电极表面上的.     

Direct Electrochemical Sensing of Phenazine‐1‐carboxylic Acid Secreted by Pseudomonas chlororaphis subsp. aureofaciens BCRC 11057T Using Disposable Screen‐printed Carbon Electrode

A novel electrochemical approach for direct recognition of antibiotic phenazine‐1‐carboxylic acid (PCA) was developed. PCA was electropolymerized on preanodized screen‐printed carbon electrode (SPCE*‐PCA) through repetitive cyclic voltammetry and characterized by XPS and FESEM. Electron transfer involved intermediate phenomenon of diffusion‐controlled redox process and surface bound redox reaction. At pH 8 (optimum), SPCE*‐PCA had a detection limit of 0.51±0.04 μM, a quantification limit of 1.7±0.13 μM, linearity of up to 50 µM, a repeatability of 15.5 % and a reproducibility of 1.7 %. PCA secreted by Pseudomonas chlororaphis subsp. aureofaciens BCRC 11057^T was investigated successfully using present single run approach.     

氨基脲分子印迹电化学传感器的制备及应用

以氨基脲(SEM)为模板分子,邻苯二胺为功能单体,在0.1 mol/L NaAc-HAc缓冲液(pH 5.2)中,通过电聚合法制备分子印迹传感器.采用循环伏安法(CV)、差分脉冲法(DPV)、电化学阻抗谱(EIS)和扫描电镜表征了此分子印迹传感器的识别性能和表面形貌.结果表明,此传感器具有粗糙、多孔的形貌,对SEM具有良好的选择性识别.在0.5 mol/L KCl-0.005 mol/L K3[Fe(CN)6]溶液中,采用DPV方法考察了功能单体与模板分子的摩尔比、模板洗脱剂、洗脱时间和温育时间对传感器响应的影响.优化后的实验条件为:功能单体与模板分子的摩尔比1:2,洗脱液为0.2 mol/L NaOH,洗脱时间15 min,温育时间12 min.在优化的实验条件下,传感器的DPV峰电流差值与SEM的浓度在3.75～ 188 ng/L范围呈良好的线性关系,检出限为1.5 ng/L(S/N=3).将此传感器应用于市售新鲜虾肌肉及受污染虾肌肉中SEM含量测定,加标回收率为80％～97％.     

Synthesis,characterization and performance enhancement of dry polyaniline-coated neuroelectrodes for electroencephalography measurement

Originating from a combination of neuroscience and biomedical engineering strategies, neuroprosthetics are developed as substitutes for sensory or cognitive modality damages caused by an injury or a disease. Dry electrodes are essential devices for monitoring of the biopotential such as electroencephalography (EEG) and electrocardiography (ECG). In this paper, polyaniline (PANI) coated stainless steel (SS) electrodes have been fabricated using in-situ electrochemical polymerization on the SS surface. The SEM images showed the formation of a nanoporous PANI-coating on the SS electrodes. EIS measurements on a skin model demonstrated a significantly lower contact impedance for the PANI-coated electrodes compared to bare SS electrodes. Furthermore, increasing the thickness of the nanoporous coating resulted in a higher contact impedance reduction. The comparison of the EEG measurements for the manufactured electrodes with conventional wet Ag/AgCl electrodes showed that the electrodes could successfully monitor alpha rhythms and muscle artifacts, as well. The prepared electrode can be used in various applications such as biopotential monitoring.     

纳米氧化铜修饰的苯巴比妥分子印迹传感器的制备及其电化学性能

为了改善分子印迹传感器的灵敏度, 在四丁基高氯酸铵的支持电解质溶液中, 以甲基丙烯酸为功能单体, 马来松香丙烯酸乙二醇酯为交联剂在纳米氧化铜修饰过的玻碳电极上电聚合了一种苯巴比妥(PB)识别性能的分子印迹传感膜. 采用循环伏安(CV)法、差分脉冲伏安(DPV)法及交流阻抗(EIS)法对这种纳米氧化铜修饰过的印迹及非印迹电极的电化学性能进行了研究, 结果显示纳米氧化铜修饰过的印迹及非印迹电极的电化学性能完全不同. X射线衍射(XRD)证实纳米粒子为氧化铜. 采用扫描电镜(SEM)对纳米氧化铜修饰过的印迹传感器的形貌进行分析, 发现纳米氧化铜分散在电极表面, 改善了修饰印迹传感器的识别点. 差分脉冲伏安法(DPV)表明苯巴比妥的浓度在1.0×10^-8-1.8×10^-4 mol·L^-1 范围内呈现良好的线性关系(线性相关系数R=0.9994); 检出限2.3×10^-9 mol·L^-1 (信噪比(S/N)=3). 研究结果表明纳米氧化铜修饰过的印迹传感器具有较高灵敏度及选择性. 此印迹传感器能用于实际样品中苯巴比妥的检测, 加标回收率在95.0%-102.5%.     

6-Vinyl coenzyme Q0: Electropolymerization and electrocatalysis of NADH oxidation exploiting poly-p-quinone-modified electrode surfaces

6-Vinyl coenzyme Q₀ serves as a convenient starting material for the formation of electropolymerized coenzyme Q₀ on glassy carbon electrodes and the modified electrodes displays electrocatalytic activity toward NADH (β-nicotinamide adenine dinucleotide) oxidation. The detection of NADH was measured by differential pulse voltammetry, which reveals that the peak current is linear to the concentration of NADH within the range of 10–100 μM. This would be helpful for the understanding of the interaction between coenzyme Q₀ and NADH in the biological process.     

苯酚苯胺共聚物在304不锈钢电极表面的电化学合成及成膜微观结构分析

苯酚和苯胺在304不锈钢阳极表面实现了电化学共聚,反应在中性水溶液中进行,电解质为硫酸钠. 比较不同苯酚苯胺浓度下共聚成膜耐点蚀能力,当苯酚为0.09 mol/L和苯胺为0.01 mol/L时最佳.红外光谱分析证实苯胺结构出现在苯酚苯胺的共聚物中,且共聚物膜比聚苯酚膜含有更多支链. 利用苯酚苯胺共聚物膜在四氢呋喃中的部分溶解性,使用扫描电子显微镜分析四氢呋喃清洗前后的成膜,观察到网状聚苯胺结构. 将共聚物膜与聚苯酚膜微观结构进行推测和比较,解释在电聚合反应中适量加入苯胺能提升成膜防腐能力原因.     

Square Wave Voltammetry for Selective Detection of Dopamine Using Polyglycine Modified Carbon Ionic Liquid Electrode

The electrochemical polymerization of glycine on carbon ionic liquid electrode (CILE) was described. The presence of ionic liquid on the surface of CILE facilitated the electropolymerization of glycine. The polyglycine modified CILE provided a valid and simple approach to selectively detect dopamine in the presence of AA in physiological environment. The proposed sensor not only decreased the voltammetric responses of AA but also dramatically enhanced the oxidation peak current of DA compared to bare CILE. Using square wave voltammetry, the modified CILE showed good electrochemical behavior to DA, a linear range of 1.0×10^?7–3.0×10^?4 M in the presence of 1 mM ascorbic acid (AA) and a detection limit of 5.0×10^?9 M was estimated (S/N=3).     

可快速充放电聚吡咯/碳纳米管复合材料电化学聚合与表征

采用恒电流法制备了具有可快速充放电性能的对甲基苯磺酸根(TOS-)掺杂聚吡咯/功能化单壁碳纳米管(PPy-TOS/F-SWNTs)复合材料,扫描电镜(SEM)结果表明该复合材料呈纳米棒状构成的多孔结构,棒径约为70nm;比表面积(BET)测试分析表明该复合材料有着较高的比表面积(12.64m2.g-1)和大的介孔孔隙率(20-40nm).循环伏安(CV)、电化学阻抗谱(EIS)和恒电流充放电(GC)电化学分析表明该材料具有优异的快速充放电性能,在800mV的电位窗和2.5A.g-1(功率密度为2kW.kg-1)的电流密度下该材料具有211F.g-1的比容量(能量密度为18.7Wh.kg-1),而当充放电电流高达80A.g-1(功率密度为60kW.kg-1)时比容量仍可达141.8F.g-1(能量密度为12.6Wh.kg-1),同时该材料还表现出优异的稳定性,在10A.g-1大电流下经历10000圈循环后容量仍保持95.2%.     

Electropolymerization of Acid Chrome Blue K on Glassy Carbon Electrode for the Determination of Curcumin

Acid chrome blue K (ACBK) was electropolymerized on the surface of a glassy carbon electrode (GCE) by cyclic voltammetric sweep in the potential range from –0.2 to 0.9 V. The characteristic of poly‐ACBK film was studied by different methods such as electrochemical impedance spectroscopy (EIS) and cyclic voltammetry. This modified electrode showed excellent electrocatalytic response to curcumin with the increase of the electrochemical responses. Under the optimal conditions a good linear voltammetric response could be obtained over the range of 1.0 × 10^?7‐7.0 × 10^?5 M and the detection limit was got as 4.1 × 10^?8 M (S/N = 3). The method was successfully applied for the determination of curcumin in human urinev samples.