Formation of higher cyclic oligomers in polyamide‐4,6

An example of morphology‐steered chemistry of cyclic oligomers with the example of polyamide‐4,6 (PA46) is discussed in this article. The cyclic oligoamide profiles of solid‐state post condensed PA46 show an unusual maximum for intermediate cycles consisting of 10 and 12 amide groups, which are formed in the initial stage of solid state post condensation. This is explained from the short chain length at the start of the post condensation, the preorganization of linear oligomers in the lamellar crystal structure, and the occurrence of amide units in the PA46 lamellar folds. Further the development of the cyclic oligomers up to the cyclic hexadecamide is followed on heating the base polymer in the melt at 310 °C, where it showed to react back to the theoretical Jacobsen and Stockmayer distribution. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of porphyrin‐end‐functionalized polycyclohexane with well‐controlled and defined polymer chain structure

Tetraphenylporphyrin‐end‐functionalized polycyclohexane (H₂TPP‐PCHE) and its metal complexes (MTPP‐PCHE) were synthesized as the first successful example of porphyrin‐end‐functionalized transparent and stable polymers with a well‐controlled and defined polymer chain structure. Chloromethyl‐end‐functionalized poly(1,3‐cyclohexadiene) (CM‐PCHD) was synthesized as prerequisite prepolymer by the postpolymerization reaction of poly(1,3‐cyclohexadienyl)lithium and chloro(chloromethyl)dimethylsilane. CM‐end‐functionalized PCHE (CM‐PCHE) was prepared by the complete hydrogenation of CM‐PCHD with p‐toluenesulfonyl hydrazide. H₂TPP was incorporated onto the polymer chain end by the addition of 5‐(4‐hydroxyphenyl)‐10,15,20‐triphenylporphyrin to CM‐PCHE. The complexation of H₂TPP‐PCHE and Zn(OAc)₂ (or PtCl₂) yielded a zinc (or platinum) complex of H₂TPP‐PCHE. H₂TPP‐PCHE and MTPP‐PCHE were readily soluble in common organic solvents, and PCHE did not inhibit the optical properties of the H₂TPP, ZnTPP, and PtTPP end groups. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of poly(p‐oxybenzoyl) crystals using direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides

Poly(p‐oxybenzoyl) (POB) crystals were prepared by reaction‐induced crystallization during direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides. Polymerizations were carried out at 300 °C in dibenzyltoluene at a concentration of 1% with three kinds of anhydrides of boronic acid such as 3,4,5‐trifluorophenylboronic acid (TFB), 4‐methoxyphenylboronic acid (MPB) and 4‐biphenylboronic acid (BPB). The POB crystals were formed as precipitates in the solution and the morphology was considerably influenced by both the structure of the boronic anhydride and its concentration (c_B). Needle‐like crystals were firmed in the presence of TFB anhydride (TFBA) at c_Bs of 5 and 10 mol % by the spiral growth of lamellae. Spherical aggregates of slab‐like crystals were formed at c_Bs from 50 to 100 mol %. The polymerization with MPB anhydride and BPB anhydride (BPBA) also yielded the needle‐like crystals at c_Bs of 50 and 5 mol %, respectively. The polymerization with TFBA at lower c_B was favorable to prepare the needle‐like crystal. Molecular weight was also influenced by the structure of the boronic anhydride and c_B. M_n increased generally with c_B and BPBA gave the highest M_n of 14.7 × 10³ at c_B of 100 mol %. The loose packing of the molecules in the crystal caused by the bulkiness of the end‐groups made the polymerization in the crystals more efficiently. Morphology and molecular weight of the POB crystals could be controlled by the chemical structure and the content of boronic anhydride. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

An analytical method for prohexadione in Chinese cabbage and apple

A residual determination method as a regulatory residue method was developed using HPLC‐UVD for prohexadione residues in Chinese cabbage (Brassica pekinensis) and apple (Malus domestica). The developed method consisted of solid–liquid extraction with acidic acetonitrile and ion‐suppression liquid–liquid partitioning, followed by anion exchange cartridge cleanup. The limits of detection and quantitation for the method were 0.005 and 0.02 mg/kg, respectively. The method gave good linearity in the range of 0.02–2.5 mg/kg. Accuracy and precision ranged from 84.1 to 94.1% and from 2.4 to 6.9%, respectively. Additionally, the confirmative conditions of LC‐MS/MS for prohexadione were set in negative electrospray ionization mode with transitions of m/z 211.4 → 167.5 and m/z 211.4 → 123.5 in the selected reaction monitoring mode. The applicability of the method was demonstrated by analyzing real samples collected from local markets in Seoul, Republic of Korea. This developed method fully deserves consideration in accordance with its sensitivity, accuracy and precision required for residue analysis of prohexadione in Chinese cabbages and apples. Copyright © 2010 John Wiley & Sons, Ltd.     

互联网网站IPv6升级改造方案

就互联网网站的IPv6升级改造提供了一个可行的技术方案,并介绍了改造过程中的关键技术和产品。     

Impact of average photon-energy coefficient of solar spectrum on the short circuit current of photovoltaic modules

The output energy of photovoltaic (PV) modules is influenced by the spectral irradiance distribution of the solar spectrum under outdoor conditions. To rate the precise output energy of PV modules, the correction of short circuit current (I_SC) based on actual environmental conditions is needed, because I_SC significantly depends on the shape of the spectral irradiance distribution. The average photon energy (APE) is a zero-dimensional index for spectral irradiance distribution, and APE value uniquely describes the shape of a solar spectrum. Thus, APE has an impact on I_SC of PV modules. In this contribution, the relationship between APE coefficient and I_SC of the multi-crystalline silicon, single-crystalline silicon, heterojunction intrinsic thin-layer, back contact, copper indium selenide and cadmium telluride PV modules has explored. It is revealed that APE value changes the I_SC of PV modules which appeared to have immense possibilities of I_SC correction using APE coefficient. This new approach can be very effective for precise rating the output energy of PV modules under actual outdoor conditions.     

Development and Application of Ultra Performance Liquid Chromatography Method to the Quantification of the Biotransformation of Methyl Paraben in Eisenia foetida

A simple and quick ultra performance liquid chromatography method (UPLC) has been developed for determination of methyl paraben (MP) and its major metabolites p‐hydroxybenzoic acid (pHBA) and phenol (Phe), following its biotransformations in Eisenia foetida. After different exposure time to paper contact test, the presence of methyl paraben and his biotransformation products in adult earthworms was monitored. Determination of its metabolites was achieved with a BEH (bridged ethane‐silicon hybrid) C₁₈ column (2.1×50 mm i.d., 1.7 µm particle size), using methanol/water/phosphoric acid as mobile phase, under a gradient elution program, and a PDA (photo‐diode array) detection (quantification with MaxPlot in the range 210–400 nm). The absorption of MP did not exceed 30% and in the first 4–6 h after exposure only minute amounts of pHBA and Phe were detected in the worm homogenates. After 48 h of exposures, almost 70% of absorbed MP was already metabolized to Phe and around 20% could be found as pHBA.     

Multi-Valued Performance Metrics for Real-Time Embedded Systems

To rapidly explore the design space of a real-time embedded system, it is essential to be able to efficiently analyze the timing behaviors of different system architectures. This includes not only determining if a design can satisfy all the timing constraints but also comparing the timing performance of different designs for tradeoff purposes. Understanding the exact timing behavior of a large system can be computationally prohibitive. Previous work in this area has mostly focused on producing a yes/no answer to the schedulability of a system architecture under the worst-case scenario. This not only often leads to overly pessimistic designs, but also provides no insight as how to rank different architectural designs with respect to their timing performance. In this paper, we present several metrics that may be used to measure the timing performance of a design. The metrics were analyzed using workloads from both real-world task systems and randomly generated task systems. A superior metric has been identified through analysis of large sets of experiments. We also show, through an example, how this metric can be used effectively during a design exploration process.     

复杂光机系统综合性能评估方法

作为涉及光、机、电、控、热、气、液等多个领域的复杂光机系统，如何对其进行综合性能评估一直是难以解决的关键技术问题。针对该问题，通过分层分析并结合熵值、灰色和模糊评估等方法，提出了能够直观反映复杂光机系统的评估因子，即G因子。通过G因子，可直观地对复杂光机系统的综合性能进行评估，并可对比不同光机系统的综合性能；同时在评估过程中，也可对复杂光机系统的某个或几个关键参数进行对比分析。G因子提供了一种能够反映复杂光机系统综合性能的直观参数，为复杂光机系统的综合性能评估及相关系统研制提供了技术支撑。