Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern

A simple and accurate algorithm (phase scanning method) is proposed for 3D surface contouring and dynamic response determination of a vibrating object. A sinusoidal fringe pattern is projected onto a low-frequency vibrating object by a programmable liquid crystal display projector. The fringe patterns are captured by a high-speed CCD camera with a telecentric gauging lens. Phase values are evaluated point by point using phase scanning method. From the phase values of each point on the object, the contour of the specimen at different instants of vibration can be retrieved. In this paper, a small vibrating coin is used to demonstrate the validity of the method and the experimental results are compared with test results on a stationary coin using four-step phase shifting and fast Fourier transform methods. The technique is especially useful in applications where the vibrating object has a complicated shape.     

薄膜偏振分光镜的研究

概述薄膜偏振分光镜的研究现状及其主要特点，重点分析薄膜偏振分光镜的设计原理,并利用等效折射率的方法计算中心波长的反射率．     

激光二极管线阵光束变换研究

推导出激光二极管线阵光束通过透镜系统的光强分布表达式，分析了出射光束的传输特性，设计一种凹柱透镜的光束变换系统得到一维均匀光强分布。此外，给出扩展角宽度的计算公式。     

Dreamweaver UltraDev环境下实现数据库的动态链接

简要论述了如何在Dreamweaver UltraDev环境下实现对已有的Access或Excel数据库的动态链接的操作。在Dreamweaver UltraDev环境下，实现对企业、事业单位原有Access或Excel数据库的动态链接，可以在很短的时间内开发出符合单位实际情况的信息管理系统，并且可以使这类已经创建好的数据信息，不加任何修改地与外部进行交流，实现资源共享。将此系统以主页的形式链入Internet，可以实现开放式管理体系。     

Study of the pulsed laser vapor doping of Si(1 0 0) with KrF excimer laser and BCl3 gas

The properties of pulsed laser vapor doping on p-Si(1 0 0) with a KrF (248 nm) excimer pulsed laser (248 nm) and BCl₃ gas are reported in this paper. The doped samples are characterized by the resistance measured using a four-probe method, since the sheet resistance changes with the carrier concentration of the sample. The doping effects with the variation of laser energy density, pulse number, and the pressure of BCl₃ were investigated in terms of the sheet resistance. In this way, the optimized parameters were obtained and used for the positive heavy doping on p-Si(1 0 0) and p-Si(1 1 1). Then, using a square mesh under the above conditions, an image doping was completed. Finally, the metal–semiconductor Ohmic contacts were realized by plating Ag and Cu films on the doped surface.     

Asymptotic Methods Applied to Contact Problems

Asymptotic methods for contact problems are expounded. Some typical integral equations are considered     

Optimal stopping problems by two or more decision makers: a survey

A review of the optimal stopping problem with more than a single decision maker (DM) is presented in this paper. We classify the existing literature according to the arrival of the offers, the utility of the DMs, the length of the sequence of offers, the nature of the game and the number of offers to be selected. We enumerate various definitions for this problem and describe some dynamic approaches. Fouad Ben Abdelaziz is on leave from the Institut Superieur de Gestion, University of Tunis, Tunisia e-mail: foued.benabdelaz@isg.run.tn.     

A combined programming and iteration algorithm for finite element analysis of three-dimensional contact problems

Comparing with two-dimensional contact problems, three-dimensional frictional contact problems are more difficult to deal with, because of the unknown slip direction of the tangential force and enormous computing time. In order to overcome these difficulties, a combined PQP (Parametric Quadratic Programming) and iteration method is derived in this paper. The iteration algorithm, which alleviates the difficulty of unknown slip direction, is used along with the PQP method to cut down computing costs. Numerical example is given to demonstrate the validity of the present algorithm. The project supported by the Machinary and Electronics Ministry of China     

Optimal production control of a dynamic two-product manufacturing system with setup costs and setup times

This paper deals with the optimal control of a one-machine two-product manufacturing system with setup changes, operating in a continuous time dynamic environment. The system is deterministic. When production is switched from one product to the other, a known constant setup time and a setup cost are incurred. Each product has specified constant processing time and constant demand rate, as well as an infinite supply of raw material. The problem is formulated as a feedback control problem. The objective is to minimize the total backlog, inventory and setup costs incurred over a finite horizon. The optimal solution provides the optimal production rate and setup switching epochs as a function of the state of the system (backlog and inventory levels). For the steady state, the optimal cyclic schedule is determined. To solve the transient case, the system's state space is partitioned into mutually exclusive regions such that with each region, the optimal control policy is determined analytically.