Micellar parameters of diblock copolymers and their interactions with ionic surfactants

The interactions of non-ionic amphiphilic diblock copolymer poly（oxyethylene/oxybutylene）(E₃₉B₁₈) with anionic surfactant sodium dodecyl sulphate（SDS） and cationic surfactant hexadecyltrimethylammonium bromide（CTAB） were studied by using various techniques such as surface tension,conductivity,steady-state fluorescence and dynamic light scattering.Surface tension measurements were used to determine the critical micelle concentration（CMC） and thereby the free energy of micellization(△G_mic),free energy of adsorption(△G_ads),surface excess concentration（Γ） and minimum area per molecule（A）.Conductivity measurements were used to determine the critical micelle concentration（CMC）,critical aggregation concentration（CAC）,polymer saturation point（PSP）,degree of ionization（α） and counter ion binding（β）. Dynamic light scattering experiments were performed to check the changes in physiochemical properties of the block copolymer micelles taken place due to the interactions of diblock copolymers with ionic surfactants.The ratio of the first and third vibronic peaks（I₁/I₃） indicated the polarity of the pyrene micro environment and was used for the detection of micelle as well as polymer-surfactant interactions.Aggregation number（N）,number of binding sites（n） and free energy of binding （△G_b） for pure surfactants as well as for polymer-surfactant mixed micellar systems were determined by the fluorescence quenching method.     

Second-order nonlinear optical properties of side-chain liquid crystalline polymers studied by second harmonic generation from thin films

The two independent elements of the second-order nonlinear optical susceptibility tensor of a range of contact poled, donor–acceptor substitued side-chain polymers are reported. The susceptibilities were measured by second harmonic generation from thin films, typically less than 0.5 μm thick, at a fundamental wavelength of 1064 nm. The largest value was χ = 2.64 pm/V which is three times greater than the χ value of KDP and was measured in a nitrobenzylidene side chain, polyhydroxystyrene polymer with an eleven unit alkyl chain spacer attaching the side group to the backbone. Typical susceptibility values obtained were χ～0.3 pm/V and X⁽²⁾₃₃～1 pm/V. The coherence lengths of the materials, which lay in the range 4–12 μm, were measured at 1064 nm by the maker fringe technique using thick, wedge-shaped samples.     

Solubilization and applications of single-walled carbon nanotubes into aqueous and organic media by the use of nanometer size-controlled fluoroalkyl end-capped oligomeric aggregates

We have studied on the solubilization of single-walled carbon nanotubes (SW-CNTs) into aqueous and organic media by the use of a variety of nanometer size-controlled fluorinated self-assemblies, which were formed by the aggregations of end-capped fluoroalkyl segments in fluoroalkyl end-capped acrylic acid oligomers [R_F-(ACA)_n-R_F], N,N-dimethylacrylamide oligomers [R_F-(DMAA)_n-R_F], acryloylmorpholine oligomers [R_F-(ACMO)_n-R_F], and N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomers [R_F-(DOBAA)_n-R_F]. Fluorinated self assemblies formed in organic media (colorless solutions) could solubilize SW-CNTs into organic media to afford the transparent pale yellow solutions. The dynamic light scattering measurements showed that the size of fluorinated self-assemblies increased after the solubilization of SW-CNTs into organic media. It was suggested that the solubilization of SW-CNTs into organic media is due to the encapsulation of SW-CNTs into fluorinated assemblies. Fluorinated assemblies were also able to solubilize SW-CNTs into water to give the transparent gray solutions. Among a variety of fluorinated assemblies, fluorinated assemblies formed by R_F-(ACMO)_n-R_F [R_F = CF(CF₃)OC₆F₁₃] oligomer was more effective for the solubilization of SW-CNTs into both aqueous and organic media. Contact angle measurements of dodecane and the fluorescence spectra for poly(methyl methacrylate) cast film modified by fluorinated self-assemblies—SW-CNTs complexes showed that SW-CNTs are dispersed above the PMMA surface.     

Dynamic kinetic resolution of secondary alcohols with a readily available ruthenium-based racemization catalyst

An easy to handle and stable racemization catalyst for secondary alcohols is obtained by an in situ mixture of readily available [Ru(cymene)Cl₂]₂ with chelating aliphatic diamines. Optimization of the reaction revealed that N,N,N′,N′-tetramethyl-1,3-propanediamine as ligand racemizes aromatic alcohols completely within 5 h. This easy to handle and stable catalytic system is combined with a lipase-catalyzed resolution to provide an efficient dynamic kinetic resolution of secondary alcohols.     

MOLECULAR ENGINEERING STUDIES ON NONTHROMBOGENIC BIOMATERIALS--A NOVEL CLASS OF NONTHROMBOGENIC BIOMATERIALS WITH ZWITTERIONIC STRUCTURE OF CARBOXYBETAINES

N,N-dimethyl-N-methacryloyloxyethyl-N-carboxyethyl ammonium (DMMCA) was graft-copolymerized onto the surface of segmented poly(ether urethane) (SPEU) and PE film. The carboxybetaine structure on SPEU and PE film surfaces was confirmed by ATR-FTIR, XPS and water contact angle measurements. Through the experiments with platelet adhesion and protein adhesion assay in vitro, the two materials studied, including poly-DMMCA gel, all show excellent nonthrombogenicity. This confirms once again that the zwitterionic molecular structure on the surfaces of materials is essential for improving their nonthrombogenicity and biocompatibility.     

Photophysics of Fluorescent Contact Sensors Based on the Dicyanodihydrofuran Motif

Fluorescent molecular rotors have been used for measurements of local mobility on molecular length scales, for example to determine viscosity, and for the visualization of contact between two surfaces. In the present work, we deepen our insight into the excited-state deactivation kinetics and mechanics of dicyanodihydrofuran-based molecular rotors. We extend the scope of the use of this class of rotors for contact sensing with a red-shifted member of the family. This allows for contact detection with a range of excitation wavelengths up to ∼600 nm. Steady-state fluorescence shows that the fluorescence quantum yield of these rotors depends not only on the rigidity of their environment, but – under certain conditions – also on its polarity. While excited state decay via rotation about the exocyclic double bond is rapid in nonpolar solvents and twisting of a single bond allows for fast decay in polar solvents, the barriers for both processes are significant in solvents of intermediate polarity. This effect may also occur in other molecular rotors, and it should be considered when applying such molecules as local mobility probes.     

Nido-carborane encapsulated by BODIPY zwitterionic polymers: Synthesis,photophysical properties and cell imaging

Carborane encapsulation was visualized by using fluoroboropyrrole (BODIPY) zwitterionic polymer as fluorescence marker. Firstly, a water-soluble fluorescent probe carrier was prepared by combining the BODIPY derivatives with poly (carboxybetaine methacrylate) (p-CBMA). Two oil-in-water carborane polymers were self-assembled in organic solvents by means of dual ion hydrogen bonding. The ultraviolet and fluorescence spectra were measured with different organic solvents, and the spectra ranged from 531 to 555 nm. The dynamic self-assembly effect was tested by TEM, and the internal microscopic phenomena of the water-soluble polymer were further observed. It was confirmed that two kinds of BODIPY zwitterionic polymers were firmly encase the fat-soluble carborane, forming an oval shape. Carboranes are water-soluble, can achieve biocompatible expression, and can visualize the degree of aggregation in the targeted cells through its own fluorescence effect. Subsequent imaging of the cells showed that both polymers entered the targeted cells.     

Ageing of surface treated thermoplastic polyolefins

Thermoplastic polyolefin panels were treated with a flame, flame & water, and accelerated thermo molecular adhesion process (ATmaP) treatment. XPS, contact angle and adhesion test (pull off) results were acquired over a one year period to determine the changes in the elemental composition, surface energy and adhesion strength respectively over time. All surface-treated thermoplastic polyolefin samples showed a sharp decline in adhesion strength up to an ageing period totalling 6 months. The decline in adhesion strength was correlated with a decline in the nitrogen-containing constituents and C–O functional groups at the surface and a decline in surface energy for the flame & water-treated sample. There was no significant change in adhesion strength for all samples for ageing periods greater than 6 months. ATmaP-treated thermoplastic polyolefin outperformed the other two surface treatments in adhesion strength tests due to ATmaP retaining nitrogen-based functional groups (mainly nitrogen oxides) over the year long study. This retention of functionality allowed for a slower ageing process for ATmaP-treated surfaces in comparison to the other surface treatments.     

At-line bioprocess monitoring by immunoassay with rotationally controlled serial siphoning and integrated supercritical angle fluorescence optics

In this paper we report a centrifugal microfluidic “lab-on-a-disc” system for at-line monitoring of human immunoglobulin G (hIgG) in a typical bioprocess environment. The novelty of this device is the combination of a heterogeneous sandwich immunoassay on a serial siphon-enabled microfluidic disc with automated sequential reagent delivery and surface-confined supercritical angle fluorescence (SAF)-based detection. The device, which is compact, easy-to-use and inexpensive, enables rapid detection of hIgG from a bioprocess sample. This was achieved with, an injection moulded SAF lens that was functionalized with aminopropyltriethoxysilane (APTES) using plasma enhanced chemical vapour deposition (PECVD) for the immobilization of protein A, and a hybrid integration with a microfluidic disc substrate. Advanced flow control, including the time-sequenced release of on-board liquid reagents, was implemented by serial siphoning with ancillary capillary stops. The concentration of surfactant in each assay reagent was optimized to ensure proper functioning of the siphon-based flow control. The entire automated microfluidic assay process is completed in less than 30 min. The developed prototype system was used to accurately measure industrial bioprocess samples that contained 10 mg mL⁻¹ of hIgG.     

EPDM受热氧化与动态流变行为

采用动态流变学方法研究了三元乙丙橡胶(EPDM)高温氧化与动态粘弹响应之间的关系.在熔体状态下,EPDM的动态粘弹行为随温度升高而改变,呈现出非均相结构的流变响应特征;加入复合抗氧剂后,EPDM在一定的时间范围内,呈现均相体系的流变响应特征.这些结果表明,流变响应特征的改变与受热导致EPDM熔体氧化进而引起结构的改变密切相关.低频区域粘弹函数对EPDM结构变化具有敏感响应,2 0 0～2 2 0℃可明显观察到受热氧化导致EPDM结构的生成.