有线电视工程建设流程再造设计

从理论与实际工作相结合的角度出发,以淄博广电青鸟公司为研究对象,对有线电视网络工程建设流程的现状、存在的问题和原因进行细致深入分析,然后按照提出的再造方案的设计原则,设计了工程建设流程的再造方案,并对新旧流程进行比较。     

焊膏印刷工艺参数的选择与优化

表面贴装工艺流程的关键工序之一就是焊膏印刷,其工艺控制的好坏直接影响着装配的线路板的质量。通过对印刷工艺参数的分析,利用试验设计的方法来找出关键工艺参数,并加以优化设定,从而为控制工序参数奠定基础。     

积层板的制造方法

概述了积层板的开发背景、制造工艺和最近的开发动向。     

从RC5到RC6

论文详细描述并分析了从RC5到RC6的演化设计过程,在详细研究了RC6性能的同时,指出了应该如何从一个旧的密码设计出好的新密码。最后对RC6和Rijndael作了一些比较,指出各自在性能上的优缺点。     

On the effects of the packet size distribution on the packet loss process

Real-time multimedia applications have to use forward error correction (FEC) anderror concealment techniques to cope with losses in today’s best-effort Internet. The efficiency of these solutions is known however to depend on the correlation between losses in the media stream. In this paper we investigate how the packet size distribution affects the packet loss process, that is, the distribution of the number of lost packets in a block, the related FEC performance and the average loss run length. We present mathematical models for the loss process of the MMPP+M/D/1/K and the MMPP+M/M/1/K queues; we validate the models via simulations, and compare the results to simulation results with an MPEG-4 coded video trace. We conclude that the deterministic packet size distribution (PSD) not only results in lower stationary loss probability than the exponential one, but also gives a less correlated loss process, both at a particular average link load and at a particular stationary loss probability as seen by the media stream.Our results show that for applications that can only measure the packet loss probability, the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior. Our results show that the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior and thus can improve the queuing performance by decreasing the variance of its PSD.     

现代电子工业Cpk评价中的特殊问题

现代电子工业生产具有许多新的特点，如果不针对具体情况，均采用传统工业生产中广泛使用的常规方法计算其工序能力指数，评价生产工艺水平，将可能导致错误的结论。总结了电子工业生产中工艺参数的典型特点，并讨论了工序能力指数的正确计算方法。     

热作模具钢表面激光堆焊耐磨合金层的研究

本文主要通过在H13钢上用大功率CO_2激光束进行堆焊,阐述了激光堆焊工艺变化对堆焊组织和性能的影响,在本试验条件下,得到了高密度弥散金属化合物组织的激光堆焊层,平均硬度为HV800,与基体呈冶金结合,耐磨性比H13模具钢提高149%。     

Modeling ion implantation of HgCdTe

Ion implantation of boron is used to create n on p photodiodes in vacancy-doped mercury cadmium telluride (MC.T). The junction is formed by Hg interstitials from the implant damage region diffusing into the MC.T and annihilating Hg vacancies. The resultant doping profile is n⁺/n^-/p, where the n⁺ region is near the surface and roughly coincides with the implant damage, the n^- region is where Hg vacancies have been annihilated revealing a residual grown-in donor, and the p region remains doped by Hg vacancy double acceptors. We have recently developed a new process modeling tool for simulating junction formation in MC.T by ion implantation. The interstitial source in the damage region is represented by stored interstitials whose distribution depends on the implant dose. These interstitials are released into the bulk at a constant, user defined rate. Once released, they diffuse away from the damage region and annihilate any Hg vacancies they encounter. In this paper, we present results of simulations using this tool and show how it can be used to quantitatively analyze the effects of variations in processing conditions, including implant dose, annealing temperature, and doping background.     

WEAK CONVERGENCE FOR NON-UNIFORM φ-MIXING RANDOM FIELDS

Let $\{\xi_{\bold t}, {\bold t} \in {\bold Z}^d\}$ be a nonuniform $\varphi$-mixing strictly stationary real random field with $E\xi_{\bold 0}=0, E|\xi_{\bold 0}|^{2+\delta}<\infty$ for some $0<\delta<1$. A sufficient condition is given for the sequence of partial sum set-indexed process $\{Z_n(A),\ A\in \Cal A\}$ to converge to Brownian motion. By a direct calculation, the author shows that the result holds for a more general class of set index ${\Cal A}$, where ${\Cal A}$ is assumed only to have the metric entropy exponent $r, 0相似文献   

CPL冷凝单管融化过程的双倒易边界元分析

1引言CPL（毛细泵两相流回路）能传输较高的热负荷，而且不需要循环泵、阀门等运动部件，重量轻可靠性好；在飞行器热控制方面有很好的应用前景[1]。CPL在恶劣的空间环境中运行，需要防止工作介质出现冷冻，为此，我们已经用解析[2]和数值的方法[3]进行了初步的分析，得到了一些可供工程设计参考应用的结果。另外，在恶劣的空间环境中，如果出现冻结，需要融化起动，热管的安全设计需要研究它的融化特性，以确保热管在空间能正常运行。双倒易边界元方法用Laplace基本解[4]，通过对一类偏微分方程两侧进行转化，将它全部转化为纯边界积分…