薄层层析法在表面活性剂检测和分析中的应用

薄层层析（ＴＬＣ）是一种简便的分离分析方法。适用于许多有机化合物的分离,精制,定性和定量分析,也是表面活性剂分析中的重要手段之一。文中简述了薄层层析的测试方法、条件选择和发展趋势,并对ＴＬＣ在表面活性剂检测和分析中的应用作了具体阐述。     

Selective grafting of amine groups on polyethylene by means of NH3−H2 RF glow discharges

Plasma treatments in Radio Frequency Glow Discharges fed with NH₃−H₂ mixtures have been performed for modifying polyethylene surfaces. Treatment kinetics and the role of species present in the glow have been investigated. Actinometric Optical Emission Spectroscopy has been utilized as a plasma diagnostic technique. Electron Spectroscopy for Chemical Analysis has been utilized for studying surface composition of treated substrates, which have been examined both astreated and after derivatization of amine-functionalities with 4-trifluoromethylbenzaldehyde vapors. It has been found that experimental plasma parameters and plasma density of active species can be controlled to achieve selective grafting of-NH₂ among all other nitrogen-containing groups.     

神经网络法用于多元混酸同时测定

利用多层神经网络误差反向传播算法处理酸碱电位滴定数据，求得出多元混合酸各组分的浓度，优化了神经网络的结构和参数，测定了三组分有机酸混合样品，结果良好，平均相对偏差ＲＳＤ≤４％。     

聚类分析法在食品TE分级中应用研究

用１５种食品的Ｚｎ、Ｃｕ、Ｆｅ、Ｍｇ含量作分级特征，按聚类分析分级，结果以Ｚｎ、Ｃｕ、Ｆｅ、Ｍｇ总量均值最低的蕃茄为Ⅰ级；低的白鸡、鲜牛奶、黄瓜、新会柑、罗岗橙为Ⅱ级；高的精面粉、水豆腐、粉丝、牛肉、鸡蛋、鸭蛋、西洋菜、白芽为Ⅲ级；最高的红豆为Ⅳ级．提示膳食中Ｚｎ、Ｃｕ、Ｆｅ、Ｍｇ含量大于供给量标准时可选Ⅲ、Ⅳ级，小于标准选Ⅰ、Ⅱ级，＝标准选Ⅰ、Ⅲ级食品．据此认为聚类分析法可用于食品分级，对选择食品、制订食谱、营养治疗、食品科研、研制食品配方等均具有实用价值和指导意义。     

MALDI－TOF－MS法分析人血清白蛋白

用基质辅助激光解吸附飞行时间质谱（ＭＡＬＤＩ－ＴＯＦ－ＭＳ）法分析测定了人血清白蛋白。结果表明，全军血液制品研究中心应用Ｒｉｖａｎｏｌ和Ｃｏｈｎ＇ｓ两种方法分离提取的人血清白蛋白，其分子量与理论计算值相吻合，其纯度与市售标准人血清白蛋白相一致，用ＭＡＬＤＩ－ＴＯＦ－ＭＳ法分析鉴定人血清白蛋白，准确、简便和灵敏（仅需ＰＭ浓度样品），且重复性好，日内和日间差的变异系数均小于０．０３％，是ＳＤＳ－ＰＡＧＥ电泳法所无法比拟的。     

三梅片成份分析研究

医药品冰片有天然品与合成品之分,天然品有:由龙脑香科(Dipterocarpaceae)植物龙脑香(Dryobalanops aromatica G aertn,f.)制得的结晶,称龙脑香冰片;白菊科(Compositae)植物艾纳香(Blumea balsamifera DC.)所得的结晶,名艾片。艾片因其晶形似梅花片,又有梅片之称,根据梅花片状又分为大梅片,二梅片,三梅片,天然品化学成分为龙脑(Borneol,Ⅰ),合成冰片(又名合成龙脑),除含龙脑外尚含较大量的异龙脑(ISO-borneol,Ⅱ)     

Evaluation of the surface tension measurement of axisymmetric drop shape analysis (ADSA) using a shape parameter

A quantitative criterion called “shape parameter” to evaluate the quality of surface tension measurement of Axisymmetric Drop Shape Analysis (ADSA) is presented. ADSA is a powerful technique for the measurement of interfacial tensions and contact angles of pendant drops, sessile drops, and bubbles. Despite the general success of ADSA, deficient results may be obtained for drops close to spherical shape. Therefore, the “shape parameter” was used to determine the range of drop shapes in which ADSA succeeds or fails. The “shape parameter” is a dimensionless parameter that expresses quantitatively the difference in shape between a given experimental profile and an inscribed circle. The surface tension measurements of ADSA were evaluated for both pendant drop and constrained sessile drop configurations using the shape parameter. Different shapes of the pendant drop were studied using different sizes and materials of holders. For each drop configuration, a “critical shape parameter” was defined based on the minimum value of the shape parameter that guarantees an error of less than ±0.1 mJ/m². Furthermore, the effects of the type of liquid and constellation on the “critical shape parameter” were studied.     

（H2O）^＋n（n=1,2）的几何结构优化和振动光谱分析

采用Ｈａｒｔｒｅｅ－Ｆｏｃｋ和ＭＰ２方法在多种水平下优化了（Ｈ２Ｏ）＾＋ｎ（ｎ ＝１，２）的几何结构，并进行了振动光谱分析。结果表明：对（Ｈ２Ｏ）＾＋采用ＭＰ２／６－３１１＋＋Ｇ（ｄ，ｐ）可得出最满意的结论。     

分析测试不确定度的评定与表示(Ⅱ)

就“不确定度”概念的来历和意义;基本术语;误差与不确定度;化学分析测量不确定度的来源;不确定度的评定;标准物质的不确定度;不确定度的评定实例等7个方面概述分析测试不确定度的评定与表示,介绍不确定度的基本知识与应用。     

Selective Determination of Verapamil in Pharmaceutics and Urine Using a Boron‐doped Diamond Electrode Coupled to Flow Injection Analysis with Multiple‐pulse Amperometric Detection

This work presents a simple and low‐cost method for fast and selective determination of Verapamil (VP) in tablets and human urine samples using a boron‐doped diamond working electrode (BDD) coupled to a flow injection analysis system with multiple pulse amperometric detection (FIA‐MPA). The electrochemical behaviour of VP in 0.1 mol L⁻¹ sulfuric acid showed three merged oxidation peaks at around +1.4 V and upon reverse scan, one reduction peak at 0.0 V (vs. Ag/AgCl). The MPA detection was performed applying a sequence of three potential pulses on BDD electrode: (1) at +1.6 V for VP oxidation, (2) at +0.2 V for reduction of the oxidized product and (3) at +0.1 V for cleaning of the working electrode surface. The FIA system was optimized with injection volume of 150 μL and flow rate of 3.5 mL min⁻¹. The method showed a linear range from 0.8 to 40.0 μmol L⁻¹ (R>0.99) with a low limit of detection of 0.16 μmol L⁻¹, good repeatability (RSD<2.2 %; n=10) and sample throughput (45 h⁻¹). Selective determination of VP in urine was performed at+0.2 V due to absence of interference from ascorbic and uric acids in this potential. The addition‐recovery tests in both samples were close to 100 % and the results were similar to an official method.